В корзине нет товаров
|
Product detailed specification |
|
|
Bore size |
81.00mm |
|
Stroke |
86.40mm |
|
JE Pistons compression ratio (CR) |
9.25:1 |
|
OEM compression ratio (CR) |
9.5:1 |
|
Dome volume (CC) |
-2.7cm3 |
|
Compression height (CH) |
32.66mm |
|
Pin diameter |
20mm |
|
Features |
Accepts Turbo and Nitrous, round piston skirt |
|
Fits for |
VAG - 1.8T 20V |
|
Product detailed specification |
|
|
Bore size |
82.00mm |
|
Stroke |
95.50mm |
|
JE Pistons compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
9.3:1 |
|
Dome volume (CC) |
-11.90cm3 |
|
Compression height (CH) |
29.24mm |
|
Pin diameter |
22mm |
|
Features |
Tuff coated piston skirt, HD Pins |
|
Fits for |
5 cylinder Audi - 2.5T 20V Stroker |
|
Product detailed specification |
|
|
Bore size |
84.50mm |
|
Stroke |
95.90mm |
|
Wiseco compression ratio (CR) |
9.0:1 |
|
OEM compression ratio (CR) |
11.3:1/10.9:1 |
|
Dome volume (CC) |
-20.50cm3 |
|
Compression height (CH) |
34.50mm |
|
Pin diameter |
20mm |
|
Features |
Accepts Turbo and Nitrous; Full round skirt |
|
Fits for |
Golf 4 R32 Turbo (BFH / BML / BJS) |
| ENGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 4B1606H |
4B1606HX |
|
| Sizes | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.8802" /47.758mm |
|
| Max Std Shaft Size |
1.8810" /47.778mm |
|
| Min Std Tunnel Size |
1.9921" /50.600mm |
|
| Max Std Tunnel Size |
1.9929" /50.619mm |
|
| Max Wall at Crown |
0.0553" / 1.405mm |
0.0548" /1.392mm |
| Max Overall Length |
0.748" / 19.00mm |
|
| Notes | Bearing has 1.65mm oil hole at crown | |
|
Diagram |
 |
|
CT-1 is a Dry Film Lubricant coating that helps reduce friction and abrasive wear. It provides intermittent dry lubrication and is not affected by dust or dirt. CT-1 is specifically engineered to withstand the extreme conditions of today's high performance engines. Professional engine builders enjoy a higher level of confidence with increased embedability, strength and durability.
|
Product detailed specification |
|
|
Bore size |
83.00mm |
|
Stroke |
92.80mm |
|
JE Pistons compression ratio (CR) |
9.6:1 |
|
OEM compression ratio (CR) |
9.6:1 |
|
Dome volume (CC) |
-7.8cm3 |
|
Compression height (CH) |
29.60mm |
|
Pin diameter |
22mm |
|
Features |
Accepts Turbo and Nitrous; FSR coated piston skirt |
|
Fits for |
VW / Audi - 2.0 TSI chain driven engines EA888 (CAWA, VAWB, CCTA, CCZB, CAEA) |
|
Product detailed specification |
|
|
Bore size |
82.50mm |
|
Stroke |
86.40mm |
|
JE Pistons compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
9.5:1 |
|
Dome volume (CC) |
-12.20cm3 |
|
Compression height (CH) |
32.66mm |
|
Pin diameter |
20mm |
|
Features |
Accepts Turbo and Nitrous; Round piston skirt |
|
Fits for |
VAG - 1.8T 20V |
Set includes:
1 crankcase gasket
1 crankshaft seal rear
1 crankshaft seal front
1 oil pump gasket
1 coolant pump gasket
etc.
|
Product detailed specification |
|
|
Bore size |
82.50mm |
|
Stroke |
86.40mm |
|
JE Pistons compression ratio (CR) |
9.0:1 |
|
OEM compression ratio (CR) |
9.3:1 |
|
Dome volume (CC) |
-5.70cm3 |
|
Compression height (CH) |
30.70mm |
|
Pin diameter |
21mm |
|
Features |
Accepts Turbo and Nitrous; Round skirt |
|
Fits for |
Audi S4, RS4, A6 - 2.7 30V |
