Прокладки

Cometic BMW M10B18 M10B20 SOHC 8V 72-88 MLS cylinder head gasket 90x1.3mm...

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

205,00 €

Toyota / BMW B58B30 Athena Cooper Ring cylinder head gasket 84x1mm 330155R

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330155R

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

299,00 €

Cometic BMW B58B30M0 / B58B30M1 MLX cylinder head gasket 83x1.16mm C14121-046

COMETIC MLX (Multi-Layer Stopper) gaskets utilize an integrated stopper layer for combustion chamber sealing and improved clamp load around the cylinder without increasing bore distortion. MLX technology can be found in some head gaskets and are made from the same materials as our MLS Head Gaskets. No sealants or re-torque required.

299,00 €

Cometic Ford 1.6 Ecoboost MLS cylinder head gasket 80.5x0.61mm C15675-024

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

179,00 €

Chevrolet LSX Athena Cooper Ring head gasket set 101.5mm 1.5mm: Left+Right...

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

399,00 €

BMW 2.0 2.5 2.8 3.0 M50 Athena Cooper Ring cylinder head gasket 86x1.6mm 330011R

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330011R
Gasket thickness: 1.60mm
Bore size: 86.00mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

299,00 €

BMW 3.2 S54B32 Athena Racing head gasket 87.50x1.2mm 330037R

BMW M3 E46 3.2 S54B32 Athena Cooper Ring cylinder head gasket 87.5x1.2mm 330037R

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number 330037R
Gasket thickness: 1.20mm
Bore size: 87.50mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

299,00 €

BMW 4.0 M60B40 Athena Cooper Ring head gasket set: Left+Right 330024R+330025R

Athena Racing 330 series Cooper Ring cylinder head gasket set.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number 330024R + 330025R
Gasket thickness: 2.00mm
Bore size: 90.60mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

399,00 €

BMW 3.5 M30 Athena Cooper Ring cylinder head gasket 93.1x2mm 330016R

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330016R
Gasket thickness: 2.00mm
Bore size: 93.10mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

299,00 €

BMW 3.0 3.2 S50B30 EURO, S50B32 Athena MLS head gasket 87x1.8mm 338081R

Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product.
The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338081R
Gasket thickness: 1.80mm
Bore size: 87.00mm

Part number starting with 338
Athena advantages
Optimized radius embossing shape	The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength
Advanced stopper technology	State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines
Coating technology	Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket

255,00 €

Opel 1.6 1.8 A16 Z16 Athena MLS cylinder head gasket 80x1mm 338286R

Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product.
The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338286R
Gasket thickness: 1.50mm
Bore size: 87.50mm

Part number starting with 338
Athena advantages
Optimized radius embossing shape	The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength
Advanced stopper technology	State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines
Coating technology	Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket

199,00 €

Mitsubishi EVO X 2.0 4B11T 87.50mm 87.50mm bore

Mitsubishi EVO X 2.0 4B11T Athena MLS cylinder head gasket 87.5x1mm 338422R

Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number 338422R
Gasket thickness: 1.00mm
Bore size: 87.50mm

Part number starting with 338
Athena advantages
Optimized radius embossing shape	The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength
Advanced stopper technology	State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines
Coating technology	Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket

162,00 €