Cцепление

Mitsubishi EVO 2.0 16V 4G63 ARP CA625+ cylinder head stud kit M11 207-4302

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

559,00 €

BMW 2.5 2.8 3.0 M50 M52 M54 FCP valve spring kit for 6mm valves

Valve springs data:

Installed seat pressure - 38kg (84lbs)

Load - 92kg@10mm (203lbs@10mm)

Max. lift - up to 11mm

Made from chrome-silicon steel SAE9254-V

24 pcs. outer springs

24 pcs. inner springs

24 pcs. titanium retainers

24 pcs. seats

With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7500 RPM.

749,00 €

Audi TT RS 2.5 20V TFSI Athena Cooper Ring cylinder head gasket 84x1.4m 330072R

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number 330072R
Gasket thickness: 1.40mm
Bore size: 84.00mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

255,00 €

VAG 2.0 16V Turbo Stroker FCP forged pistons 82mm CR 9.5

Part number: FCPPASTR820095/4
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 82.00mm
Compression ratio (CR): 9.5:1
Compression height: 29.00 mm
Pin diameter: 22mm
Stroke: 95.50mm with 236mm diesel engine block
VAG - 2.0 16V Turbo
Connecting rod length must 159mm

799,00 €

Toyota 1JZ / 2JZ Kelford Single Cam Gear KCGJZ

229,00 €

Boostline Conrod Set BMW M3 E46 S54B32 625+ 139mm BM5472-827+

Purpose-Built For Boost High Boost and BMW S54B32 Applications
Forged From Ultra-Strong 4340 Steel
Patented Three-Pocket Design
Capable of 1500 HP
3/8 x 1.600 in. ARP CA625+ Fasteners
High Quality APMCO Bronze Pin Bushing
26 Point Detailed CMM Inspection Report Included

2 399,00 €

Audi / VW 1.8T 20V, 2.7T 30V adjustable chain gear

129,00 €

Audi 2.2T 2.3 20V 3B AAN 7A King Racing connecting rod bearings CR505XP-0.25

XP	XP

C4104-PR	C4104-PR

Quantity

4

Crankshaft

47.777 / 47.757

Housing

50.599 / 50.620

Max Wall

1.402

Max Length

18.971

Engines Audi 5 cylinder engines
2.2T, 2.3 20V (3B, AAN, ADU, ABY, 7A)

99,00 €

Audi / VW 1.8T 20V Wiseco pistons CR 8.5 81.5mm K563M815

Product detailed specification
Bore size	81.50mm
Stroke	86.40mm
Wiseco compression ratio (CR)	8.5:1
OEM compression ratio (CR)	9.5:1
Dome volume (CC)	-7cm³
Compression height (CH)	32.71mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous, Round piston skirt
Fits for	VAG - 1.8T 20V

799,00 €

Mitsubishi EVO IV-IX 4G63T King Racing connecting rod bearings CR4120XP-STDX

XP	XP

C4120/PR	C4120/PR

Quantity

4

Crankshaft

44.996 / 44.981

Housing

47.998 / 48.019

Max Wall

1.488

Max Length

21.100

Engines Mitsubishi - 2.0 16V (4G63, 4G63T)

69,00 €

BMW M20 M50 M52 M54 King Racing connecting rod bearings CR6640XPC-STD Coated

XP	XP

C4042-PR	C4042-PR

Quantity

6

Crankshaft

44.991 / 44.973

Housing

48.001 / 48.016

Max Wall

1.491

Max Length

18.001

Engines: BMW - M20, M50, M52, M54

99,00 €

Audi/VW 2.0 TFSI EA113 Athena cylinder head gasket 84x0.85mm 338486R

Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number 338486R
Gasket thickness: 0.85mm
Bore size: 84.00mm

Part number starting with 338
Athena advantages
Optimized radius embossing shape	The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength
Advanced stopper technology	State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines
Coating technology	Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket

119,00 €