В корзине нет товаров
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
|
|||||||
| Quantity | 4 | ||||||
| Crankshaft | 47.777 / 47.757 | ||||||
| Housing | 50.599 / 50.620 | ||||||
| Max Wall | 1.402 | ||||||
| Max Length | 18.971 |
| 1,2,3,5 | 4 | |||||||||||||
| Pairs & PN |
|
|
||||||||||||
| Quantity | 4 | 1 | ||||||||||||
| Crankshaft | 53.978 / 53.957 | 53.978 / 53.957 | ||||||||||||
| Housing | 58.999 / 59.017 | 58.999 / 59.017 | ||||||||||||
| Max Wall | 2.499 | 2.499 | ||||||||||||
| Max Length | 18.461 | 18.461 |
Set includes:
1 cylinder head gasket (0.9x83.50mm)
1 valve cover gasket
1 intake manifold gasket
1 exhaust manifold gasket
1 universal sealing compound
2 camshaft seals
16 valve seals
and etc.
Fits for:
VAG group belt driven engines (Audi, Seat, Skoda, VW) - 2.0 16V TFSI EA113 (AXX, BGB, BHZ, BPG, BPJ, BPY, BUL, BWA, BWE, BWT, BYK, BYD, BZC, CDLA, CDLB, CDLC, CDLF, CDMA)
Spring data:
Seat pressure - 75lbs @ 35.10mm
Open (lift) pressure - 191lbs @ 10mm
Spring coil bind - 20.70mm
Rate - 12.10lbs/mm
Max lift - 14.40mm
Outer spring outer diameter: 27.50mm
Outer spring inner diameter: 20.00mm
Inner spring outer diameter: 20.00mm
Inner spring inner diameter: 15.20mm
Set includes:
Dual springs: 16 pcs. SPR-TS1015-Z20
Titanium retainers: 16 pcs. RET-TS5.5-T5
Seat locators: 16 pcs. SEAT-TS-Z20
|
|||||||
| Quantity | 4 | ||||||
| Crankshaft | 47.973 / 47.955 | ||||||
| Housing | 51.001 / 51.013 | ||||||
| Max Wall | 1.504 | ||||||
| Max Length | 19.101 |
| ENGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 4B7820H |
4B7820HX |
|
| Sizes | STD, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.8898 in / 48.000 mm |
|
| Max Std Shaft Size | 1.8905 in / 48.020 mm | |
| Min Std Tunnel Size | 2.0310 in / 51.587 mm | |
| Max Std Tunnel Size | 2.0315 in / 51.600 mm | |
| Max Wall at Crown | 0.0696 in / 1.768 mm | 0.0691 in / 1.755 mm |
| Max Overall Length |
0.807 in / 20.50 mm |
|
| Notes | ||
|
Diagram |
 |
|
Подробная спецификация продукта:
Производитель: FCP Engineering
|
Product detailed specification |
|
|
Bore size |
84.40mm |
|
Stroke |
90.00mm |
|
JE pistons compression ratio (CR) |
8.0:1 |
|
OEM compression ratio (CR) |
8.0:1 |
|
Dome volume (CC) |
-25.30cm3 |
|
Compression height (CH) |
39.65mm |
|
Pin diameter |
22mm |
|
Fits for |
Lancia Delta Integrale - 2.0 16V Turbo (HF) |
