Nissan

показывать:

Сортировать по:

Nissan 3.5 VQ35DE ACL Race Series main bearings 4M2633H-STD

99,00 €

Nissan VQ20DE VQ25DE/DET VQ30DE/DET VQ35DE ACL thrust washers 2T2633

19,00 €

Nissan RB30 / RB30ET / VG30DETT ACL Race connecting rod bearings 6B2390H-STD

85,00 €

Nissan 350Z 3.5 VQ35DE ACL Race connecting rod bearings 6B2640H-STD

109,00 €

Nissan 3.5 VQ35DE ACL Race Series main bearings 4M2633H-0.25

99,00 €

Nissan Skyline RB26DETT ACL Race main bearings 7M2428H-STD

Sizes	STD, .025, .25, .50
Oil Clearance
Half Type	Upper & lower
Material	F780
Min. Std Shaft Size	54,951 mm / 2.1634 in
Max. Std Shaft Size	54,975 mm / 2.1644 in
Min. Std Tunnel Size	58,645 mm / 2.3089 in
Max. Std Tunnel Size	58,658 mm / 2.3094 in
Max Wall at Crown	1,827 mm / 0.0719 in
Max Overall Length	26,95 mm / 1.0610 in (2428H(F)) 20 mm / 0.7874 in (2429H)
Notes
Diagrams	2428H-L (4) 2428H-U (4) 2429H-L (1,2,3,5,6,7) 2429H-U (1,2,3,5,6,7)

185,00 €

ACL plain bearing measuring tape/flexigauge AR-1 (Red)

1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.

16,00 €

1 2 3