Toyota

Kolbenschmidt plain bearing measuring tape/plastic gauge 120000417001

Part number 50009880.
Kolbenschmidt plain bearing measuring tape / plastic gauge kit (10 pcs.).
Measuring strips for the determination of bearing clearance for plain bearings

18,00 €

ACL plain bearing measuring tape/flexigauge AG-1 (Green)

1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.

16,00 €

Permatex Ultra Slick assembly lubricant for engine bearings 118ml (1 pc.)

18,00 €

ACL plain bearing measuring tape/flexigauge AR-1 (Red)

1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.

16,00 €

Toyota 2.5 3.0 2JZGTE ACL Race connecting rod bearings 6B8100H-STD

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Identical halves
Material	Tri-metal Hardened steel backs
Min. Std Shaft Size	2.0465in / 51.981mm
Max. Std Shaft Size	2.0472in / 52mm
Min. Std Tunnel Size	2.1663in / 55.024mm
Max. Std Tunnel Size	2.167in / 55.042mm
Max Wall at Crown	0.0593in / 1.506mm
Max Overall Length	0.7598in / 19.3mm
Weight	0.253
Notes	0

109,00 €

Subaru BRZ FA20 / Toyota 4U-GSE ACL connecting rod bearings 4B8310H

79,00 €

Toyota 2.0 3S-GE 3S-GTE ACL Race connecting rod bearings 4B8366H

72,00 €

Toyota 2.8 3.0 5M-GE 7M-GE/7M-GTE ACL Duraglide connecting rod bearings...

75,00 €

BMW / Toyota 3.0 B58B30 S58B30 ACL Race Series connecting rod bearings...

209,00 €

Toyota 1UZ/2UZ/3UZ-FE ACL Race connecting rod bearings 8B8091H-STD

Oil Clearance	Standard
Half Type	Identical Halves
Material	Tri-metal Hardened steel backs
Min. Std Shaft Size	2.0465in / 51.981mm
Max. Std Shaft Size	2.0472in / 51.999mm
Min. Std Tunnel Size	2.1654in / 55.001mm
Max. Std Tunnel Size	2.1663in / 55.024mm
Max Wall at Crown	0.0589in / 1.496mm
Max Overall Length	0.7677in / 19.5mm
Weight	0.33

145,00 €

Toyota 1.8 16V 2ZZ-GE ACL Race connecting rod bearings 4B1856H-STD

109,00 €

Toyota 2.5 3.0 2JZGTE ACL Race connecting rod bearings 6B8100HX-STD

ENGINE BEARINGS
	CON ROD BEARING SET
	Part#
	6B8100H	6B8100HX
Sizes	STD, .025, .25	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical halves
Material	Tri-metal Hardened steel backs
Min Std Shaft Size	2.0465in / 51.981mm
Max Std Shaft Size	2.0472in / 52mm
Min Std Tunnel Size	2.1663in / 55.024mm
Max Std Tunnel Size	2.167in / 55.042mm
Max Wall at Crown	0.0593in / 1.506mm	0.0588in / 1.493mm
Max Overall Length	0.7598in / 19.3mm
Notes
Diagram (Top View)

Engines Toyota - 2.5 3.0 (1JZGE, 1JZGTE, 2JZGE, 2JZGTE)

109,00 €