Parts by engine

Nissan 200SX S14 SR20DET Supertech inconel exhaust valve NEVI-1005-7

Product detailed specification
Model number	NEVI-1005/7
Head diameter	30.15mm
Stem diameter	6.94mm
Length	102.40mm
Material	Inconel
Fits for	Nissan 200SX S14 - 2.0 16V (SR20DET)

35,00 €

Cometic Renault 1.8 2.0 16V F4P F4R MLS cylinder head gasket 84.5x1.3mm...

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

144,00 €

Lancia Delta Integrale 2.0 HF ACL Race Series connecting rod bearings 4B2904HX

89,00 €

Opel Corsa VXR OPC GSI 1.6 8V-16V ACL Race Series connecting rod bearings...

Sizes	STD, .025, .25
Oil Clearance
Half Type
Material
Min. Std Shaft Size	42,971
Max. Std Shaft Size	42,987
Min. Std Tunnel Size	46,000
Max. Std Tunnel Size	46,013
Max Wall at Crown	1.495
Max Overall Length	16.63
Weight	0.12
Notes

75,00 €

Cometic Mitsubishi 2.0 4G63 4G63T DOHC EVO 4-8 MLX cylinder head gasket...

COMETIC MLX (Multi-Layer Stopper) gaskets utilize an integrated stopper layer for combustion chamber sealing and improved clamp load around the cylinder without increasing bore distortion. MLX technology can be found in some head gaskets and are made from the same materials as our MLS Head Gaskets. No sealants or re-torque required.

159,00 €

Nissan GT-R 3.8 VR38DETT ACL Race Series main bearings 4M2505H-0.25

229,00 €

Honda RSX-S 2.0 K20A/Z MAHLE forged piston kit CR 12.9 86.5mm 929170905

Product detailed specification
Bore size	86.50mm
Stroke	86.00mm
MAHLE compression ratio (CR)	12.9:1
OEM compression ratio (CR)	11.7:1
Dome volume (CC)	12cm³
Compression height (CH)	30.00mm
Pin diameter	22mm
Features	4032 alloy
Fits for	Honda RSX-S - 2.0 (K20A/Z)

799,00 €

BMW 135i 335i N54B30 Mahle forged piston kit 84mm CR 10.2 197832209

Product detailed specification
Bore size	84.00mm
Stroke	89.60mm
MAHLE compression ratio (CR)	10.2:1
OEM compression ratio (CR)	10.2:1
Dome volume (CC)	-17.2cm³
Compression height (CH)	31.70mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous
Fits for	BMW - 3.0 24V Turbo (N54B30)

1 349,00 €

HONDA B16A1 / A2 / A3 DOHC VTEC Mahle forged piston kit CR 11.3 81.50mm...

Product detailed specification
Bore size	81.50mm
Stroke	77.40mm
MAHLE compression ratio (CR)	11.3:1
OEM compression ratio (CR)	10.2:1
Dome volume (CC)	9.1cm³
Compression height (CH)	30.00mm
Pin diameter	21mm
Features	4032 alloy
Fits for	HONDA B16A1 / A2 / A3

799,00 €

Mitsubishi EVO X 2.0 16V 4B11T Mahle piston kit 86mm CR 9.3 929945985

Product detailed specification
Bore size	86.00mm
Stroke	86.00mm
Mahle compression ratio (CR)	9.3:1
OEM compression ratio (CR)	9.0:1
Dome volume (CC)	-4.5cm³
Compression height (CH)	33.37mm
Pin diameter	23mm
Features	2618 alloy
Fits for	Mitsubishi EVO X - 2.0 16V (4B11T)

PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

899,00 €

Ford Cosworth 2.0 YB ARP flywheel bolt kit 251-2803

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

105,00 €

Cometic BMW M3 / M4 3.0 S55B30 MLX cylinder head gasket 85x1.1mm C14133-044

COMETIC MLX (Multi-Layer Stopper) gaskets utilize an integrated stopper layer for combustion chamber sealing and improved clamp load around the cylinder without increasing bore distortion. MLX technology can be found in some head gaskets and are made from the same materials as our MLS Head Gaskets. No sealants or re-torque required.

299,00 €