В корзине нет товаров
Outer diameter - 32.97mm
Inner diameter - 31.00mm
Outer height - 26.50mm
Stem length - 13.90mm
Stud diameter - 7.00mm
16 pcs. FCP Engineering racing mechanical solid lifters
Forged steel, nitride hardened surface, HRC 50
Installed follower height to camshaft must be adjusted with lash caps (not included)
Part number 6B5530HX-STD (+0.001" extra clearance)
ACL Race Series connecting rod bearings
Audi / VW - 2.8 2.9 3.2 3.6 VR6 R32 R36 (BUB, BHK, AES, AUE, ABV, AAA, AMY)
|
Product detailed specification |
|
|
Bore size |
86.00mm |
|
Stroke |
85.80mm |
|
JE Pistons compression ratio (CR) |
12.5:1 |
|
OEM compression ratio (CR) |
10.8:1 |
|
Dome volume (CC) |
-3.20cm3 |
|
Compression height (CH) |
31.62mm |
|
Pin diameter |
21mm |
|
Features |
Accepts Nitrous and E85, FSR series skirt |
|
Fits for |
BMW M3 E36 S50B30 |
Подробная спецификация продукта:
Производитель: FCP Engineering
Модель: FCPRHA14450622-5
Профиль: профиль H
С на С: 144mm
Диаметр отверстия нижней головки: 50.6mm
Диаметр пальца: 22mm
Количество: 5 шт., 10 шт. ARP2000 3/8" болты
Сделано из:4340 EN24er cтали
Максимальная рекомендуемая мощность: 700HP (5 цилиндров)
Mаксимальные обороты RPM: 9000RPM
|
Product detailed specification |
|
|
Model number |
SIVN-1010 |
|
Head diameter |
36.00mm |
|
Stem diameter |
5.96mm |
|
Length |
104.35mm |
|
Material |
Black nitrited |
|
Fits for |
Sbaru WRX - 2.0 2.5 (EJ20, EJ25) |
Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number 330047R
Gasket thickness: 1.60mm
Bore size: 83.50mm
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
|
Product detailed specification |
|
|
Bore size |
81.00mm |
|
Stroke |
92.80mm |
|
JE Pistons compression ratio (CR) |
9.0:1 |
|
OEM compression ratio (CR) |
10.0:1 |
|
Dome volume (CC) |
-3.30cm3 |
|
Compression height (CH) |
30.70mm |
|
Pin diameter |
21mm |
|
Features |
Accepts Turbo and Nitrous; Round skirt |
|
Fits for |
Audi S4, RS4, A6 - 2.7 30V |
Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338260R
Gasket thickness: 1.90mm
Bore size: 87.50mm
|
Part number starting with 338 |
|
|
Athena advantages |
|
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
|
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
|
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
|
Product detailed specification |
|
|
Bore size |
87.00mm |
|
Stroke |
86.00mm |
|
JE Pistons compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
9.0:1 |
|
Dome volume (CC) |
-17.60cm3 |
|
Compression height (CH) |
30.50mm |
|
Pin diameter |
21mm |
|
Features |
Accepts Turbo and Nitrous; Fsr series skirt |
|
Fits for |
Opel - 2.0 16V (C20LET, C20XE). |
|
Product detailed specification |
|
|
Model number |
AEVI-1206S |
|
Head diameter |
30.90mm |
|
Stem diameter |
5.94mm |
|
Length |
94.80mm |
|
Material |
Inconel |
|
Fits for |
Audi A8, S4, RS6 (2003-2008) - 4.2 40V V8 |
