BMW (24)

BMW M3 E36 3.0 S50B30 JE Pistons kit CR 12.5 86mm 345626

Product detailed specification
Bore size	86.00mm
Stroke	85.80mm
JE Pistons compression ratio (CR)	12.5:1
OEM compression ratio (CR)	10.8:1
Dome volume (CC)	-3.20cm³
Compression height (CH)	31.62mm
Pin diameter	21mm
Features	Accepts Nitrous and E85, FSR series skirt
Fits for	BMW M3 E36 S50B30

1 349,00 €

BMW M3 E36 S50B32 Supertech double valve spring set SPRK-H1005D-BM-B32E

Spring info:
Seat pressure - 85lbs @ 36.30mm
Open (lift) pressure - 202lbs @ 10mm
Spring coil bind - 20.70mm
Rate - 11.50lbs/mm
Max lift - 16.20mm
Outer spring outer diameter - 29.65mm
Outer spring inner diameter - 21.85mm
Inner spring outer diameter - 20.50mm
Inner spring inner diameter - 15.50mm

Set includes:
Dual springs - 24 pcs. SPR-H1005D/BM-B32E
Titanium retainers - 24 pcs. RET-KA20A2/T2
Seats - 24 pcs. SEAT-BM80

1 100,00 €

BMW 2.5 2.7 M20 Athena Cooper Ring cylinder head gasket 85.5x2mm 330015R

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330015R
Gasket thickness: 2.00mm
Bore size: 85.50mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

325,00 €

BMW 3.0 S55B30 / N55B30 ARP cylinder head stud kit

599,00 €

BMW / Toyota 3.0 B58B30 S58B30 ACL Race Series main bearings 7M1512H-0.25

259,00 €

BMW 3.0 24V N54B30 Ferrea exhaust valve STD F2365P

The Super Alloy Engine valves represent the highest level of sophistication in valve technology. These valves are designed to handle the extreme heat requirements and punishment of today’s Nitro Fuels, Supercharged, Turbocharged, Nitrous Oxide, and Marine race motors.

57,00 €

BMW M3 E36 3.0 S50B30 Euro JE Pistons kit CR 11.5 86.50mm 345625

Product detailed specification
Bore size	86.50mm
Stroke	85.80mm
JE Pistons compression ratio (CR)	11.5:1
OEM compression ratio (CR)	10.8:1
Dome volume (CC)	-7.80cm³
Compression height (CH)	31.62mm
Pin diameter	21mm
Features	FSR series skirt
Fits for	BMW M3 E36 S50B30 Euro

1 349,00 €

BMW 2.8 M50B28 M52B28 TURBO FCP комплект кованых поршней 84mm CR 9.0

Aртикул детали: FCPPB840090M50
Производитель: FCP Engineering
Кованые высокопроизводительные поршни для различных применений практически во всех типах двигателей для гонок и уличного использования
Сделано из 4032-T6, юбка поршня имеет молибденовое покрытие.
Каждый набор поршней также включает кольца и пальцы серии HD.
Диаметр отверстия: 84.00mm
Коэффициент сжатия (CR): 9.0:1
Высота сжатия: 32.50 mm
Диаметр пальцаr: 22mm
Xод: 84.00mm
BMW 328 528 Turbo (M50B28, M52B28)
Длина шатуна должна быть 135mm
Эти поршни предназначены для хода BMW 2.8 двигатель M50B25 с кривошипным жалюзелем M52B28!

1 169,00 €

BMW S55B30 / N55B30 Xtreme Performance 230mm Ceramic Twin Plate Clutch...

- Clutch Disc Diameter (mm) 230
- Clutch Disc Spline Count 26
- Clutch Disc Spline Diameter (mm) 35
- Flywheel Step +3.8
- Torque (Nm) 1830
- 230mm Twin Plate Solid Ceramic – for extreme power and endurance applications. Offers maximum torque transfer and durability under sustained high-temperature conditions.
- Kit Includes
  
  Flywheel, Two Discs, Intermediate Plate, Main Casting, Clutch Cover, Relase Bearing, Spigot Bearing, Bolts, Alignment Tool
- Flywheel
  
  Single Mass Flywheel
- Weight [KG]:
  
  17.2

2 199,00 €

Kelford BMW B58 (GEN1) camshaft set 270°/268° | 10.30mm/10.15mm 257-A

1 999,00 €

BMW 3.0 N54B30 / N55B30 / S55B30 FCP racing conical spring and retainer kit

Valve springs data
Installed seat pressure - 34kg (75lbs)
Load - 63kg@10mm (140lbs@10mm)
Max lift - up to 12mm
Made from chrome-silicon steel SAE9254-V
Fits BMW 3.0 N54, N55, S55 engines
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7500 RPM.
Kit includes:
24 pcs. conical valve springs
12 pcs. titanium retainers 5mm
12 pcs. titanium retainers 6mm

799,00 €

BMW M3 E36 3.0 S50B30 Euro JE Pistons kit CR 12.5 86.50mm 345627

Product detailed specification
Bore size	86.50mm
Stroke	85.80mm
JE Pistons compression ratio (CR)	12.5:1
OEM compression ratio (CR)	10.8:1
Dome volume (CC)	-3.60cm³
Compression height (CH)	31.62mm
Pin diameter	21mm
Features	FSR series skirt
Fits for	BMW M3 E36 S50B30 Euro

1 349,00 €