В корзине нет товаров
Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330016R
Gasket thickness: 2.00mm
Bore size: 93.10mm
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number 330037R
Gasket thickness: 1.20mm
Bore size: 87.50mm
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
|
|||||||
| Quantity | 4 | ||||||
| Crankshaft | 51.999 / 51.989 | ||||||
| Housing | 54.999 / 55.019 | ||||||
| Max Wall | 1.491 | ||||||
| Max Length | 19.969 |
| ENGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 6B1515H |
6B1515HX |
|
| Sizes | STD, .025, .25 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.9675in / 49.975mm |
|
| Max Std Shaft Size |
1.9681in / 49.991mm |
|
| Min Std Tunnel Size |
2.0866in / 53.000mm |
|
| Max Std Tunnel Size |
2.0875in / 53.015mm |
|
| Max Wall at Crown |
0.0588in / 1.493mm |
0.0538in / 1.481mm |
| Max Overall Length |
0.709in / 18.00mm |
|
| Notes | ||
|
Diagram |
 |
|
| Sizes | STD, .025, .25 |
| Oil Clearance | Standard |
| Half Type | Upper & Lower |
| Material | Tri-Metal |
| Min. Std Shaft Size | 2.1646in / 54.98mm |
| Max. Std Shaft Size | 2.1654in / 55mm |
| Min. Std Tunnel Size | 2.3228in / 59mm |
| Max. Std Tunnel Size | 2.3236in / 59.02mm |
| Max Wall at Crown | 0.0788in / 2.002mm |
| Max Overall Length | 0.7874in / 20mm |
| Weight | 0.285 |
| Notes | 0 |
ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.
Производитель: FCP Engineering
Модель: FCPRHT1425522
Профиль: профиль H
С на С: 142mm
Диаметр отверстия нижней головки: 55mm
Диаметр пальцаr: 22mm
Количество: 6 шт.., 12 шт. ARP2000 3/8" болты
Сделано из:4340 EN24er cтали:
Максимальная рекомендуемая мощность: 1200HP (6 cylinder)
Mаксимальные обороты RPM: 9000RPM
Toyota Supra - 3.0 (2JZGTE, 2JZGE, 2JZA80)
Подробная спецификация продукта:
Производитель: FCP Engineering
Модель:FCPRHVW13650622
Профиль:профиль H
С на С: 136mm
Диаметр отверстия нижней головки 50.6mm
Диаметр пальца: 22mm
Количество: 4 шт., 8 pcs. ARP2000 3/8" болты
Сделано из:4340 EN24er cтали
Максимальная рекомендуемая мощность:: 600HP (4 цилиндров)
Mаксимальные обороты: 9000RPM
VW Corrado Golf - 1.8 G60 (PG)
Подробная спецификация продукта:
Производитель: FCP Engineering
Part number FCPRHH13444821.
Модель: FCPRHH13444821
Профиль:профиль H
С на С: 134.40mm
Диаметр отверстия нижней головки: 48mm
Диаметр пальца: 21mm
Количество: 4 шт., 8 шт. ARP2000 3/8" болты
Сделано из:4340 EN24er cтали
Максимальная рекомендуемая мощность: 600HP (4 cylinder)
Mаксимальные обороты RPM: 9000RPM
Honda - 1.6 16V Vtec (B16A/A2/A3)
