Renault

Renault 1.6 1.7 1.8 1.9 2.0 2.0 King Racing Pleuellager CR4019XP-STD

XP	XP

C4019-PR	C4019-PR

Quantity

4

Crankshaft

48.019 / 48.001

Housing

51.587 / 51.600

Max Wall

1.775

Max Length

20.470

Motoren: 1.6 1.7 1.8 1.9 2.0 (F1N, F2N, F2R, F3N, F3P, F3R, F4R, F7P, F7R, F8M, F8Q)

49,00 €

Renault 1.6 1.7 1.8 1.9 2.0 2.0 King Racing Pleuellager CR4019XP-0.25

XP	XP

C4019-PR	C4019-PR

Quantity

4

Crankshaft

48.019 / 48.001

Housing

51.587 / 51.600

Max Wall

1.775

Max Length

20.470

Engines: 1.6 1.7 1.8 1.9 2.0 (F1N, F2N, F2R, F3N, F3P, F3R, F4R, F7P, F7R, F8M, F8Q)

49,00 €

Renault MB5180XP 1.6 1.7 1.8 1.9 2.0 2.0 hauptlager

Renault 1.6 1.7 1.8 1.9 2.0 2.0 King Racing Hauptlager MB5180XP-STD

XP	XP

M5180U-PR	M5180L-PR

Quantity

5

Crankshaft

54.795 / 54.785

Housing

58.730 / 58.745

Max Wall

1.946

Max Length

18.499

Motoren: 1.6 1.7 1.8 1.9 2.0 (F1N, F2N, F2R, F3N, F3P, F3R, F4R, F7P, F7R, F8M, F8Q)

73,00 €

Kolbenschmidt plastigage Meßstreifen für Gleitlager 120000417001

Teilenummer 50009880.
Kolbenschmidt Plastigage Meßstreifen Gleitlager Kit (10 Stk.).
Messstreifen zur Bestimmung des Lagerspiels bei Gleitlager.

18,00 €

Permatex Ultra Slick Montageschmierstoff für Motorlager 118ml (12 Stk.)

215,00 €

Renault 1.6 1.7 1.8 1.9 2.0 King Racing Kurbelwellen Hauptlager Satz...

73,00 €

Renault 1.6 1.7 1.8 1.9 2.0 2.0 King Racing Pleuellager CR4019XP-STDX

XP	XP

C4019-PR	C4019-PR

Quantity

4

Crankshaft

48.019 / 48.001

Housing

51.587 / 51.600

Max Wall

1.775

Max Length

20.470

Motoren: 1.6 1.7 1.8 1.9 2.0 (F1N, F2N, F2R, F3N, F3P, F3R, F4R, F7P, F7R, F8M, F8Q)

49,00 €

ACL Meßstreifen für Gleitlager / Flexigauge AR-1 (Rot)

1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.

16,00 €