2.8 2.9 3.2 3.6 VR6

Audi / VW 2.8 2.9 3.2 3.6 VR6 R32 R36 ACL Race Series connecting...

Teilenummer 6B5530H-STD
ACL Race series Pleuellagersatz
Audi / VW - 2.8 2.9 3.2 3.6 VR6 R32 R36 (BUB, BHK, AES, AUE, ABV, AAA, AMY)

146,00 €

Audi / VW 2.8 2.9 3.2 3.6 VR6 R32 R36 ACL Race Series connecting...

Teilenummer 6B5530HX-STD (+0.001" extra Spiel)
ACL Race Series Pleuellagersatz
Audi / VW - 2.8 2.9 3.2 3.6 VR6 R32 R36 (BUB, BHK, AES, AUE, ABV, AAA, AMY)

146,00 €

Audi / VW 2.8 2.9 3.2 3.6 VR6 R32 R36 ACL Race Series connecting...

146,00 €

VAG 2.8 2.9 3.2 3.6 VR6R32 R36 ACL Anlaufscheiben 2T5532

Teilenummer 2T5532-STD
ACL Anlaufscheiben Kit
VAG - 2.8 2.9 3.2 3.6 VR6 R32 R36

19,00 €

Audi / VW 2.8 2.9 3.2 3.6 VR6 R32 R36 ACL Race Hauptlagersatz 7M5532H-STD

Teilenummer 7M5532H-STD
ACL Race Series Hauptlagersatz
Audi / VW - 2.8 2.9 3.2 3.6 VR6 R32 R36 (BUB, BHK, AES, AUE, ABV, AAA, AMY)

199,00 €

Audi / VW 2.8 2.9 3.2 3.6 VR6 R32 R36 ACL Race Hauptlagersatz 7M5532HX-STD

Teilenummer 7M5532HX-STD (+0.001" extra Spiel)
ACL Race Series Hauptlagersatz
Audi / VW - 2.8 2.9 3.2 3.6 VR6 R32 R36 (BUB, BHK, AES, AUE, ABV, AAA, AMY)

199,00 €

Audi / VW 2.8 2.9 3.2 3.6 VR6 R32 R36 ACL Race Hauptlager 7M5532H-0.25

199,00 €

Kolbenschmidt plastigage Meßstreifen für Gleitlager 120000417001

Teilenummer 50009880.
Kolbenschmidt Plastigage Meßstreifen Gleitlager Kit (10 Stk.).
Messstreifen zur Bestimmung des Lagerspiels bei Gleitlager.

18,00 €

ACL Meßstreifen für Gleitlager / Flexigauge AG-1 (Grün)

1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.

16,00 €

Permatex Ultra Slick Montageschmierstoff für Motorlager 118ml (1 Stk.)

18,00 €