Es gibt keine Artikel im Warenkorb
Athena Racing 338-Serie Mehrlagenstahl (MLS) Zylinderkopfdichtung.
Athena MLS Dichtungen sind speziell für die Anforderungen der heutigen Rennmotoren entwerfen und bieten verbesserte Abdichtung gegen OEM Produkt.
Dichtungen sind aus 2-5 Sichten hochwertigem Edelstahl und Federstahl hergestellt.
Teilenummer 338433R
Dichtungsdicke: 1.00mm
Zylinderdurchmesser: 77.80mm
|
Teilenummer beginnt 338 |
|
|
Athena Vorteile |
|
|
Optimierte Radius Prägeform |
Die runde Form der Prägung erhöht Besiegelung auf Zylinderbohrung, Öl- und Kühlwasserkanäle und und verbessert der Rückfederung Stärke |
|
Fortschrittliche Stoppertechnik |
Der Stand der Technik erhöht den Dichtungsdruck um den Zylinder. Höchste Dichteigenschaften bei Hochleistungsmotoren |
|
Beschichtungstechnik |
Entworfen und konstruiert von Athena die spezielle Beschichtung auf Stahloberflächen aufgebracht, verbessert die |
| ENGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 4B1606H |
4B1606HX |
|
| Sizes | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.8802" /47.758mm |
|
| Max Std Shaft Size |
1.8810" /47.778mm |
|
| Min Std Tunnel Size |
1.9921" /50.600mm |
|
| Max Std Tunnel Size |
1.9929" /50.619mm |
|
| Max Wall at Crown |
0.0553" / 1.405mm |
0.0548" /1.392mm |
| Max Overall Length |
0.748" / 19.00mm |
|
| Notes | Bearing has 1.65mm oil hole at crown | |
|
Diagram |
 |
|
CT-1 is a Dry Film Lubricant coating that helps reduce friction and abrasive wear. It provides intermittent dry lubrication and is not affected by dust or dirt. CT-1 is specifically engineered to withstand the extreme conditions of today's high performance engines. Professional engine builders enjoy a higher level of confidence with increased embedability, strength and durability.
Product detailed specification
Manufacturer: FCP Engineering
The Super Alloy Engine valves represent the highest level of sophistication in valve technology. These valves are designed to handle the extreme heat requirements and punishment of today’s Nitro Fuels, Supercharged, Turbocharged, Nitrous Oxide, and Marine race motors.
The multiple award-winning Kompact EM Series of upgraded Blow Off Valves is the world's first truly plug-and-play upgrade solution for your factory diverter valve. Unplug and unbolt your OEM valve, and install a Kompact EM valve in its place. No adaptors, hoses, or extra assembly are required.
The Kompact EM Valve Series from Turbosmart takes motorsport-proven billet valve technology and adds an onboard, proprietary solenoid system and internal pressure control channels, resulting in a simple plug-and-play valve with full OE integration and control. There are no reference hoses, no separate solenoids, and no fiddly bits - Just bolt-on and plug in!
You can count on unmatched performance and reliability as a direct replacement for your factory diverter valve. The Kompact EM Valves overcome the common faults associated with plastic factory valves through our Boost-Balance Valve Design (the more boost you have, the better it seals), a positive seal O-ring on the piston's face, and billet construction. No matter your application, the Kompact EM Series will hold more boost and be more responsive in any environment.
