Spauskite čia norėdami atidaryti seną svetainės versiją
Visos kategorijos
Parts by Car
Go
Parts by Car
Go
Dalys pagal:
Kategorija

Renault

Ford CR4440XP 2.0 švaistikliniai indėklai
Renault 1.6 1.7 1.8 1.9 2.0 King Racing švaistikliniai indėklai CR4019XP-STD
XP XP
1016.jpg 1016.jpg
C4019-PR C4019-PR
Quantity  4
Crankshaft  48.019 / 48.001
Housing  51.587 / 51.600
Max Wall  1.775
Max Length  20.470
Varikliams: 1.6 1.7 1.8 1.9 2.0 (F1N, F2N, F2R, F3N, F3P, F3R, F4R, F7P, F7R, F8M, F8Q)
49,00 EUR
Renault 1.6 1.7 1.8 1.9 2.0 King Racing švaistikliniai indėklai CR4019XP-0.25
XP XP
1016.jpg 1016.jpg
C4019-PR C4019-PR
Quantity  4
Crankshaft  48.019 / 48.001
Housing  51.587 / 51.600
Max Wall  1.775
Max Length  20.470
Engines: 1.6 1.7 1.8 1.9 2.0 (F1N, F2N, F2R, F3N, F3P, F3R, F4R, F7P, F7R, F8M, F8Q)
49,00 EUR
Renault MB5180XP 1.6 1.7 1.8 1.9 2.0 pagrindiniai indėklai
Renault 1.6 1.7 1.8 1.9 2.0 King Racing pagrindiniai indėklai MB5180XP-STD
XP XP
1219.jpg 1053.jpg
M5180U-PR M5180L-PR
Quantity  5
Crankshaft  54.795 / 54.785
Housing  58.730 / 58.745
Max Wall  1.946
Max Length  18.499
Varikliams1.6 1.7 1.8 1.9 2.0 (F1N, F2N, F2R, F3N, F3P, F3R, F4R, F7P, F7R, F8M, F8Q)
73,00 EUR
Kolbenschmidt indėklų tarpelio matavimo juostelių rinkinys 50009880

Prekės kodas 50009880.
Kolbenschmidt plastikinių matavimo juostelių rinkinys (10 vnt.).
Šios matavimo juostelės yra skirtos nustatyti indėklų tarpelį.

13,00 EUR
ACL indėklų tarpelio matavimo juostelių rinkinys AG-1 (Žalios sp.)
  1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
  2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
  3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
    DO NOT REVOLVE THE SHAFT OR BEARINGS.
  4. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
  5. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2)
  6. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.


15,00 EUR
Permatex Ultra Slick surinkimo tepalas variklio indėklams 118ml

Prekės kodas 81950
Permatex Ultra Slick surinkimo lubrikantas variklio indėklams.
Talpa 118 ml.

13,00 EUR