Jūsų krepšelis yra tuščias
Athena Racing 338 serijos daugiasluoksnio plieno tarpinė.
Athena MLS tarpinės pagamintos pagal šiandieninių sportinių automobilių variklių reikalavimus ir suteikia geresnį sandarinimą lyginant su standartinėmis (OEM) tarpinėmis.
Prekės kodas 338433R
|
Part number starting with 338 |
|
|
Athena advantages |
|
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
|
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
|
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
| ENGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 4B1606H |
4B1606HX |
|
| Sizes | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.8802" /47.758mm |
|
| Max Std Shaft Size |
1.8810" /47.778mm |
|
| Min Std Tunnel Size |
1.9921" /50.600mm |
|
| Max Std Tunnel Size |
1.9929" /50.619mm |
|
| Max Wall at Crown |
0.0553" / 1.405mm |
0.0548" /1.392mm |
| Max Overall Length |
0.748" / 19.00mm |
|
| Notes | Bearing has 1.65mm oil hole at crown | |
|
Diagram |
 |
|
CT-1 is a Dry Film Lubricant coating that helps reduce friction and abrasive wear. It provides intermittent dry lubrication and is not affected by dust or dirt. CT-1 is specifically engineered to withstand the extreme conditions of today's high performance engines. Professional engine builders enjoy a higher level of confidence with increased embedability, strength and durability.
Product detailed specification
Manufacturer: FCP Engineering
The Super Alloy Engine valves represent the highest level of sophistication in valve technology. These valves are designed to handle the extreme heat requirements and punishment of today’s Nitro Fuels, Supercharged, Turbocharged, Nitrous Oxide, and Marine race motors.
The multiple award-winning Kompact EM Series of upgraded Blow Off Valves is the world's first truly plug-and-play upgrade solution for your factory diverter valve. Unplug and unbolt your OEM valve, and install a Kompact EM valve in its place. No adaptors, hoses, or extra assembly are required.
The Kompact EM Valve Series from Turbosmart takes motorsport-proven billet valve technology and adds an onboard, proprietary solenoid system and internal pressure control channels, resulting in a simple plug-and-play valve with full OE integration and control. There are no reference hoses, no separate solenoids, and no fiddly bits - Just bolt-on and plug in!
You can count on unmatched performance and reliability as a direct replacement for your factory diverter valve. The Kompact EM Valves overcome the common faults associated with plastic factory valves through our Boost-Balance Valve Design (the more boost you have, the better it seals), a positive seal O-ring on the piston's face, and billet construction. No matter your application, the Kompact EM Series will hold more boost and be more responsive in any environment.
