
COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.


Kupplungsscheibe mit keramik Performance-Kupplungsbelag.
Durchmesser: 240mm
Zähnezahl: 23
Nabenprofil: 21.9x24.3-23N
Übertragbares Motormoment: 520Nm
Vergleichsnummern Hersteller:
Audi
050 141 117 E
074 141 117 G
074 141 117 H
077 141 117 L
078 141 117
Diese Hochleistungs Kupplungsscheiben von Sachs sind ein direkter Ersatz für eine Original Kupplungsscheibe und haben eine wesentlich aggressivere Reibfläche, die es ihnen ermöglicht, bis zu 80% mehr Drehmoment auszuhalten. Dies macht sie ideal für Wettbewerbsfahrzeuge, bei denen eine aggressivere Kupplungsbetätigung akzeptabel ist. Damit diese Kupplungsscheiben mit ihrer maximalen Drehmomentkapazität arbeiten können, sollten sie mit einer Sachs-Hochleistungs-Kupplungsabdeckung verwendet werden.

| Sizes | STD, .025, .25 |
| Oil Clearance | Standard |
| Half Type | Upper & Lower |
| Material | Tri-Metal |
| Min. Std Shaft Size | 2.2435in / 56.985mm |
| Max. Std Shaft Size | 2.2441in / 57.000mm |
| Min. Std Tunnel Size | 2.4016in / 61.000mm |
| Max. Std Tunnel Size | 2.4024in / 61.021mm |
| Max Wall at Crown | 0.0783in / 1.990mm |
| Max Overall Length | 0.8268in / 21.00mm |
| Notes | For engines equipped with thrust washers |
CT-1 is a Dry Film Lubricant coating that helps reduce friction and abrasive wear. It provides intermittent dry lubrication and is not affected by dust or dirt. CT-1 is specifically engineered to withstand the extreme conditions of today's high performance engines. Professional engine builders enjoy a higher level of confidence with increased embedability, strength and durability.




|
Product detailed specification |
|
|
Bore size |
85.50mm |
|
Stroke |
88.00mm |
|
Mahle compression ratio (CR) |
9.0:1 |
|
OEM compression ratio (CR) |
8.3:1 |
|
Dome volume (CC) |
-10cm3 |
|
Compression height (CH) |
34.70mm |
|
Pin diameter |
22mm |
|
Features |
4032 alloy |
|
Fits for |
Mitsubishi EVO 8-9 - 2.0 16V (4G63) |


