Top Sellers

85.50mm Kolbenringsatz für einen Zylinder

45,00 €

85mm Kolbenringsatz für einen Zylinder

45,00 €

86.50mm Kolbenringsatz für einen Zylinder

45,00 €

86mm Kolbenringsatz für einen Zylinder

45,00 €

87.50mm Kolbenringsatz für einen Zylinder

45,00 €

87mm Kolbenringsatz für einen Zylinder

45,00 €

ACL Meßstreifen für Gleitlager / Flexigauge AG-1 (Grün)

1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.

16,00 €

ACL Meßstreifen für Gleitlager / Flexigauge AR-1 (Rot)

1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.

16,00 €

ACL Ölpumpe Mitsubishi Evo 4-9 OPMB1176

Meets or Exceeds OEM pump flow
Individually inspected and tested to assure pressure and flow specifications
Twelve-month, 12,000 mile warranty
TSI6949 and ISO certification
Die cast ADC-12 aluminum housing for added strength and reduced weight
Steel copper alloy gerotor sets for dependable service and reliability
Tight tolerances for optimum pressure and flow performance

449,00 €

ACL Ölpumpe Nissan 2.0 SR20DET S14 (1990-2002) OPNS1342

329,00 €

ACL Race Serie Ölpumpe Honda B20B4, B18C1, B16A2, B20Z2 OPHD1194HP

ACL RACE Series performance oil pumps and passenger car oil pumps assure constant and
uninterrupted flow throughout the engine’s circulatory system, ensuring the lubrication
system does not miss a beat. ACL RACE Series oil pumps are designed with high output
and high volume capabilities featuring gerotor sets that are precision machined from steel
copper alloy material. Fine tolerances ensure optimum pressure and flow.
Performance Oil Pump features:
• Increased flow and pressure characteristics
• Individually inspected and tested to assure pressure and flow characteristics

RPM	Litres/Min	Gal/Min	Hi Volume Litres/Min	Hi Volume Gal/Min
600	5,6	1,48	6,83	1,8
3000	27,3	7,2	33,3	8,8
5000	32,7	8,64	39,9	10,54

299,00 €

Alfa Romeo 1.3 1.6 1.8 2.0 ACL Race Hauptlager Satz 5M1112H-STD

ENGINE BEARINGS
	CON ROD BEARING SET	MAIN BEARING SET
	Part#	Part#
		5M1112H
Sizes		STD, .025, .25, .50
Oil Clearance		Standard
Half Type		Upper & Lower
Material		Tri-Metal
Min Std Shaft Size		2.3606" / 59.959mm
Max Std Shaft Size		2.3611" / 59.972mm
Min Std Tunnel Size		2.5062" / 63.657mm
Max Std Tunnel Size		2.5069" / 63.675mm
Max Wall at Crown		0.0720" / 1.829mm
Max Overall Length		0.723" / 18.36mm # 2, 4 (1113H) 1.005 " / 25.52mm # 1, 3, 5 (1112H)
Notes		Set contains 6 x 1112H and 4 x 1113H shells.
Diagram (Top View)

Engines Alfa Romeo - 1.3 1.6 1.8 2.0

139,00 €

Verkaufshits