Top Sellers

Turbosmart BMW N55 / S55 Kompact EM BOV VR9 Dual Port TS-0223-1092

269,00 €

Turbosmart Boost-Tee Boost Controller Schwarz TS-0101-1102

The All New Boost Tee by Turbosmart is a facelift on the tried and tested Boost Tee you’ve come to love. Now featuring a 33% smaller and more ergonomic design, the All New Boost Tee incorporates all the same functionality that make it a crowd favourite including our unique Gate Feature for maximum boost response, anti-tamper locking feature and simple use.

The Boost Tee is a pneumatic bleed valve which allows an increase in boost on turbocharger systems where boost-based actuators are used and is suitable for use on both internal and external wastegate systems. By manipulating the reference signal to an internal wastegate actuator or external wastegate, an increase in boost over and above the base spring pressure can be achieved. It is common to achieve 100 - 200% increases in boost over the base spring pressure.

Using our proven detent system, the controller can increase boost in defined steps and the locking mechanism allows the boost level to be set & secure from tampering.

Manufactured in Australia from High-Grade Brass and Billet Aluminum, the All New Boost Tee by Turbosmart is a simple, elegant and robust solution which can be relied on for simple boost control & maximum response. The All New Boost Tee by Turbosmart is the best value upgrade for your Turbocharged engine!

89,00 €

Turbosmart BOV Kompact dual port 25mm TS-0203-1022

BOV mit zwei Ausgängen. Dual Port entlüftet sowohl in die Atmosphäre als auch zurück in den Lufteinlass. Anschlüsse mit sequentiellem Timing ermöglichen einen ruhigeren Betrieb während der normalen Fahrt, während alle Vorteile eines BOV mit Entlüftung in die Atmosphäre unter Rennbedingungen genutzt werden. Einfache Umwandlung in eine voll atmosphärische oder vollständige Bypass-Einheit durch Verwendung des mitgelieferten Anschluss-Blindstopfens.

229,00 €

Turbosmart BOV Kompact dual port 34mm TS-0203-1023

Dual outlet-type BOV. Dual Port vents both to the atmosphere and back into the air intake. Ports with sequential timing allow quieter operation during normal driving, while getting all the benefits of a vent-to-atmosphere BOV under race conditions. Easily converted to a full atmospheric or full bypass unit by using supplied port blanking plug.

229,00 €

Turbosmart BOV Kompact plumb back 25mm TS-0203-1222

149,00 €

Turbosmart BOV Vee Port Pro – Blau TS-0205-1130

Redesigned from the ground up, the new Vee Port PRO is 20% smaller and 33% lighter than its predecessor. Featuring a hard anodized aluminium piston, the new Vee Port PRO offers high flow capabilities in a lighter, more compact package. Some applications my require a BOV Adapter or fitting. Please check the applications tab for part numbers. SUPPLIED WITH: 38mm hose / weld-on adapter, V-Band clamp, 360 degree swivel vaccum fitting.

219,00 €

Turbosmart BOV Vee Port Pro – Schwarz TS-0205-1131

Redesigned from the ground up, the new Vee Port PRO is 20% smaller and 33% lighter than its predecessor. Featuring a hard anodized aluminium piston, the new Vee Port PRO offers high flow capabilities in a lighter, more compact package. Some applications my require a BOV Adapter or fitting. Please check the applications tab for part numbers. SUPPLIED WITH: 38mm hose / weld-on adapter, V-Band clamp, 360 degree swivel vaccum fitting.

219,00 €

Turbosmart eB2 4 Port Ladedruckmagnet TS-0301-2003

Ersatz-Ladedruckmagnetsatz für e-Boost2
Passend für alle e-Boost2 Modelle
Lieferung mit 4-Port Ladedruckmagnet, Anschlüssen und Montagehalterung
Weit verbreitet in Performance-Motoren

159,00 €

Turbosmart externe Wastegate WG40 Einlassschweißflansch TS-0505-3001

25,00 €

Turbosmart externe Wastegate WG45 Einlassschweißflansch TS-0504-3001

29,00 €

Turbosmart FPR6 Fuel Pressure Regulator -6AN (Black) TS-0404-1022

The Turbosmart FPR6 Series provides market-leading fuel control and response via true 1:1 ratio and superior flow and bypass capacity for vehicles with -6 / 6AN fuel systems. Utilising our Stainless Steel Valve Seat & Milspec Diaphragm the FPR6 Series is suitable for all Fuel types including Race Fuel and aggressive leaded fuels. Our FPR6 Range includes 6AN inlet and outlet and return fittings and is Available in Standard (35psi to 80psi) as well as LP (3psi to 20psi) for Low Pressure and Carburettor Systems to suit 1200HP systems.

Features
Stainless Steel Valve Seat
Suitable for all fuel types
1:1 Class Leading Ratio & Response
Adjustable Pressure
1/8 NPT Pressure Sensor Port
Unique Locking Collar Design
Milspec Diaphragm
Detailed Specific Fuel Flow Data & Spec

289,00 €

Turbosmart Gen-V ALV40 (Anti-Lag Ventil) TS-0552-1402

The all-new addition to the Turbosmart line-up is the fresh air ALV40 (Anti-Lag Valve) for motorsport applications. Featuring a 40mm valve diameter and a purpose designed actuator housing. Multiple fittings are also supplied for ease of fitment and fabrication.
The fresh air valve allows for incoming charged fresh air from the turbo to be diverted safely into the exhaust manifold pre-turbine wheel with the throttle at low opening angles to allow for safer spooling of the turbocharger without the potentially damaging throttle based late combustion event style anti-lag that can induce high engine stresses and break connecting rods.
The ALV is a sealed twin chamber design with the top port being the primary control port, the spring is designed to open under vacuum conditions to allow for the air to bypass into the exhaust manifold, the lower chamber for twin port control methods, to control the valve irrespective of manifold pressure and shaft seal allows for leak proof operation.

Included:

Turbosmart Gen-V ALV
Valve Seat
Inlet V-band Clamp
Inlet Hose Adapter 1-1/2" OD
Outlet V-Band Clamp
Inlet Weld Flange 1-1/2" OD
Collar Tool
Fitting Kit
Inlet O-ring

519,00 €

Turbosmart Gen-V WG45/50 Membranersatzsatz TS-0550-3005

125,00 €

Turbosmart Gen-V WG50 Pro-Gate50 wastegate 14psi Blau TS-0554-1011

The Gen-V WG50 Pro-Gate50 external wastegate is a cost effective, high performing 50mm external wastegate.

The Gen-V provides extensive user configurability, world leading extended thermal performance, fatigue resistance and best in class flow performance for optimum control and longevity.

A direct fit upgrade to all 4th-generation Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, liquid-cooling, 1/8″ NPT ports, and are provided with a range of springs.

Available in Compressed Gas configuration.

Product features summary:
• Liquid cooling provision
• Strap type V-band clamps
• User adjustable actuator position
• Modular actuator design
• Compressed Gas configurations available.

629,00 €

Turbosmart Gen-V WG50 Pro-Gate50 Wastegate 14psi Schwarz TS-0554-1012

The Gen-V WG50 Pro-Gate50 external wastegate is a cost effective, high performing 50mm external wastegate.

The Gen-V provides extensive user configurability, world leading extended thermal performance, fatigue resistance and best in class flow performance for optimum control and longevity.

A direct fit upgrade to all 4th-generation Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, liquid-cooling, 1/8″ NPT ports, and are provided with a range of springs.

Available in Compressed Gas configuration.

Product features summary:
• Liquid cooling provision
• Strap type V-band clamps
• User adjustable actuator position
• Modular actuator design
• Compressed Gas configurations available.

629,00 €

Turbosmart Gen-V WG60 Power-Gate 60 14psi Blau TS-0555-1011

The Gen-V WG60 Power-Gate60 external wastegate is a cost effective, high performing 60mm external wastegate, the largest in the Gen-V range.

The Gen-V provides extensive user configurability, world leading extended thermal performance, fatigue resistance and best in class flow performance for optimum control and longevity.

A direct fit upgrade to all 4th-generation Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, liquid-cooling, 1/8″ NPT ports, and are provided with a range of springs.

Available in Compressed Gas configuration.

Product features summary:
• Class leading thermal performance
• Class leading flow performance
• Liquid cooling provision
• Strap type V-band clamps
• User adjustable actuator position
• Modular actuator design
• Compressed Gas configuration available

Included in the Box:
• Wastegate unit (pre-assembled with spring as per order)
• SS316 Valve seat
• Inlet V-Band
• Inlet SS304 weld flange
• Outlet V-Band
• Outlet SS304 weld flange
• Collar tool (master/slave)
• 17/7 PH 3, 5, 7, 14 psi spring kit (1x spring installed)
• 4x 1/8” NPT plugs (1x installed) / 2x 1/8” NPT nipples
• Sticker
• Instruction card

Beryllium (Be)	0%
Main Body	High temp 347 SS
Diaphragm	Proprietary Silicone w/ nomex
Actuator Housing	6061 T6 anodised Al.
Valve Guide	Nitronic 60
Valve	EV8 w/ proprietary plating
V-Band	Heat treated 431 SS w/ 18-8 nut
Weld Flanges	304 Stainless Steel
Springs	17-7PH Stainless Steel

829,00 €

Turbosmart Gen-V WG60 Power-Gate 60 14psi Schwarz TS-0555-1012

The Gen-V WG60 Power-Gate60 external wastegate is a cost effective, high performing 60mm external wastegate, the largest in the Gen-V range.

The Gen-V provides extensive user configurability, world leading extended thermal performance, fatigue resistance and best in class flow performance for optimum control and longevity.

A direct fit upgrade to all 4th-generation Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, liquid-cooling, 1/8″ NPT ports, and are provided with a range of springs.

Available in Compressed Gas configuration.

Product features summary:
• Class leading thermal performance
• Class leading flow performance
• Liquid cooling provision
• Strap type V-band clamps
• User adjustable actuator position
• Modular actuator design
• Compressed Gas configuration available

Included in the Box:
• Wastegate unit (pre-assembled with spring as per order)
• SS316 Valve seat
• Inlet V-Band
• Inlet SS304 weld flange
• Outlet V-Band
• Outlet SS304 weld flange
• Collar tool (master/slave)
• 17/7 PH 3, 5, 7, 14 psi spring kit (1x spring installed)
• 4x 1/8” NPT plugs (1x installed) / 2x 1/8” NPT nipples
• Sticker
• Instruction card

Beryllium (Be)	0%
Main Body	High temp 347 SS
Diaphragm	Proprietary Silicone w/ nomex
Actuator Housing	6061 T6 anodised Al.
Valve Guide	Nitronic 60
Valve	EV8 w/ proprietary plating
V-Band	Heat treated 431 SS w/ 18-8 nut
Weld Flanges	304 Stainless Steel
Springs	17-7PH Stainless Steel

829,00 €

Turbosmart GenV Compgate 40 externes Wastegate 14psi Blau TS-0552-1011

Modular
The 5th series wastegate range has been designed for maximum user-adjustability, without compromising performance. We designed our new unit to allow actuators to be interchangeable across the range. So, if you need a large wastegate in a tight space you can run a smaller actuator on the larger body. Additionally, if you decide to upgrade your new wastegate to a Motorsport or compressed gas-only actuator you can with an upgrade kit.
Adjustability
The unique variable adjustment design allows the wastegate actuator base to be oriented independently from the weld flanges. The cap is also completely independent and indexable in 12 different positions compared to the actuator base and body. This allows the wastegate to be fitted in confined positions without compromising packaging for fittings or aligning the cap.
Upgrades and Servicing
Due to the modular construction, the new range is also upgradeable and completely serviceable, as all components can be removed or upgraded. Components have been tested for over one million cycles so reliability will be rock-solid.
Flow and Thermal Performance
Our new range of wastegates out-flow all competitors thanks to our world-leading engineering and simulation abilities. Thermal performance has been improved drastically compared to our nearest rival, and all wastegates feature liquid cooling ports for further thermal performance if required
Control
For fine-tuning, boost performance, a selection of springs will be supplied with each wastegate. All wastegates feature 1/8″ NPT ports for maximum response and flow while maintaining a high level of compatibility for fittings.

Product features summary:

Modular interchangeable actuators
Independently orientated actuator base
New strap type V band clamps
Increased thermal and flow performance, and;
A diaphragm design that offers linear travel; regardless of spring, pressure and valve positioning, while improving response.
Integrated water cooling ports (if required)

Included in box:

Turbosmart Gen V Wastegate
Valve seat
Inlet V-band clamp
Inlet weld flange
Outlet V-band clamp
Outlet weld flange
Collar tool
Spring kit
Fitting kit

439,00 €

Turbosmart GenV Compgate 40 externes Wastegate 14psi Schwarz TS-0552-1012

Modular
The 5th series wastegate range has been designed for maximum user-adjustability, without compromising performance. We designed our new unit to allow actuators to be interchangeable across the range. So, if you need a large wastegate in a tight space you can run a smaller actuator on the larger body. Additionally, if you decide to upgrade your new wastegate to a Motorsport or compressed gas-only actuator you can with an upgrade kit.
Adjustability
The unique variable adjustment design allows the wastegate actuator base to be oriented independently from the weld flanges. The cap is also completely independent and indexable in 12 different positions compared to the actuator base and body. This allows the wastegate to be fitted in confined positions without compromising packaging for fittings or aligning the cap.
Upgrades and Servicing
Due to the modular construction, the new range is also upgradeable and completely serviceable, as all components can be removed or upgraded. Components have been tested for over one million cycles so reliability will be rock-solid.
Flow and Thermal Performance
Our new range of wastegates out-flow all competitors thanks to our world-leading engineering and simulation abilities. Thermal performance has been improved drastically compared to our nearest rival, and all wastegates feature liquid cooling ports for further thermal performance if required
Control
For fine-tuning, boost performance, a selection of springs will be supplied with each wastegate. All wastegates feature 1/8″ NPT ports for maximum response and flow while maintaining a high level of compatibility for fittings.

Product features summary:

Modular interchangeable actuators
Independently orientated actuator base
New strap type V band clamps
Increased thermal and flow performance, and;
A diaphragm design that offers linear travel; regardless of spring, pressure and valve positioning, while improving response.
Integrated water cooling ports (if required)

Included in box:

Turbosmart Gen V Wastegate
Valve seat
Inlet V-band clamp
Inlet weld flange
Outlet V-band clamp
Outlet weld flange
Collar tool
Spring kit
Fitting kit

439,00 €

Turbosmart GenV Compgate 45 externes Wastegate 14psi Blau TS-0553-1011

Modular
The 5th series wastegate range has been designed for maximum user-adjustability, without compromising performance. We designed our new unit to allow actuators to be interchangeable across the range. So, if you need a large wastegate in a tight space you can run a smaller actuator on the larger body. Additionally, if you decide to upgrade your new wastegate to a Motorsport or compressed gas-only actuator you can with an upgrade kit.
Adjustability
The unique variable adjustment design allows the wastegate actuator base to be oriented independently from the weld flanges. The cap is also completely independent and indexable in 12 different positions compared to the actuator base and body. This allows the wastegate to be fitted in confined positions without compromising packaging for fittings or aligning the cap.
Upgrades and Servicing
Due to the modular construction, the new range is also upgradeable and completely serviceable, as all components can be removed or upgraded. Components have been tested for over one million cycles so reliability will be rock-solid.
Flow and Thermal Performance
Our new range of wastegates out-flow all competitors thanks to our world-leading engineering and simulation abilities. Thermal performance has been improved drastically compared to our nearest rival, and all wastegates feature liquid cooling ports for further thermal performance if required
Control
For fine-tuning, boost performance, a selection of springs will be supplied with each wastegate. All wastegates feature 1/8″ NPT ports for maximum response and flow while maintaining a high level of compatibility for fittings.

Product features summary:

Modular interchangeable actuators
Independently orientated actuator base
New strap type V band clamps
Increased thermal and flow performance, and;
A diaphragm design that offers linear travel; regardless of spring, pressure and valve positioning, while improving response.
Integrated water cooling ports (if required)

Included in box:

Turbosmart Gen V Wastegate
Valve seat
Inlet V-band clamp
Inlet weld flange
Outlet V-band clamp
Outlet weld flange
Collar tool
Spring kit
Fitting kit

545,00 €

Turbosmart GenV Compgate 45 externes Wastegate 14psi Schwarz TS-0553-1012

Modular
The 5th series wastegate range has been designed for maximum user-adjustability, without compromising performance. We designed our new unit to allow actuators to be interchangeable across the range. So, if you need a large wastegate in a tight space you can run a smaller actuator on the larger body. Additionally, if you decide to upgrade your new wastegate to a Motorsport or compressed gas-only actuator you can with an upgrade kit.
Adjustability
The unique variable adjustment design allows the wastegate actuator base to be oriented independently from the weld flanges. The cap is also completely independent and indexable in 12 different positions compared to the actuator base and body. This allows the wastegate to be fitted in confined positions without compromising packaging for fittings or aligning the cap.
Upgrades and Servicing
Due to the modular construction, the new range is also upgradeable and completely serviceable, as all components can be removed or upgraded. Components have been tested for over one million cycles so reliability will be rock-solid.
Flow and Thermal Performance
Our new range of wastegates out-flow all competitors thanks to our world-leading engineering and simulation abilities. Thermal performance has been improved drastically compared to our nearest rival, and all wastegates feature liquid cooling ports for further thermal performance if required
Control
For fine-tuning, boost performance, a selection of springs will be supplied with each wastegate. All wastegates feature 1/8″ NPT ports for maximum response and flow while maintaining a high level of compatibility for fittings.

Product features summary:

Modular interchangeable actuators
Independently orientated actuator base
New strap type V band clamps
Increased thermal and flow performance, and;
A diaphragm design that offers linear travel; regardless of spring, pressure and valve positioning, while improving response.
Integrated water cooling ports (if required)

Included in box:

Turbosmart Gen V Wastegate
Valve seat
Inlet V-band clamp
Inlet weld flange
Outlet V-band clamp
Outlet weld flange
Collar tool
Spring kit
Fitting kit

545,00 €

Turbosmart GenV Hypergate45 High Pressure 35psi Externes Wastegate TS-0553-1312

Das externe Wastegate GenV HyperGate45 HP ist ein im Motorsport bewährtes, kostengünstiges externes Wastegate mit Basisfederdruckoptionen von bis zu 50 psi! Fügen Sie dazu eine Referenzsignalmanipulation hinzu und Sie haben einen ernsthaften Schub! Der GenV bietet umfassende Benutzerkonfigurierbarkeit, weltweit führende erweiterte thermische Leistung, Ermüdungsbeständigkeit und erstklassige Durchflussleistung für optimale Kontrolle und Langlebigkeit. Das GenV External Wastegate von Turbosmart war eine grundlegende Überarbeitung eines Klassikers und das einzige Merkmal, das aus der Gen4-Reihe übernommen wurde, war die Montageausrichtung. CFD-optimiert und intern validiert für maximalen Durchfluss und Wärmemanagement, die GenV-Reihe hat mehr Funktionen, Optionen und Leistung als jedes andere Gate wie es. Ein direkt passendes Upgrade für alle Gen4 Turbosmart-Wastegates und mit unserem einzigartigen Manschettenverriegelungssystem, variabler Betätigungskappe und -basis für eine einfache, optionale 360-Grad-Führung von Referenzschläuchen, Riemen-V-Band-Klemmen, optionaler Flüssigkeitskühlung und 1/ 8″ NPT-Referenzanschlüsse.

619,00 €

Turbosmart Hochleistungs mehrschichtiger blauer Silikonschlauch 3m 4mm...

Hochleistungs-Silikonschlauch mit mehreren Schichten.
Konstante Temperaturbeständigkeit von -50 bis 170 Grad Celsius (-60 bis 340 Grad Fahrenheit) und Druck bis 220PSI mit einer Wandstärke von 5 mm.
Entwickelt von Turbosmart zu gewinnen.

21,00 €

Turbosmart Hochleistungs mehrschichtiger rot Silikonschlauch 3m 4mm TS-HV0403-RD

Hochleistungs-Silikonschlauch mit mehreren Schichten.
Konstante Temperaturbeständigkeit von -50 bis 170 Grad Celsius (-60 bis 340 Grad Fahrenheit) und Druck bis 220PSI mit einer Wandstärke von 5 mm.
Entwickelt von Turbosmart zu gewinnen.

21,00 €

Verkaufshits