Top Sellers (50)

Ford / Mazda (2.0) 2.3 Duratec Supertech intake valve MAIVN-2301D STD

Product detailed specification
Model number	MAIVN-2301D
Head diameter	35.00mm
Stem diameter	5.48mm
Length	103.40mm
Material	Black nitrited
Fits for	Ford / Mazda (2.0) 2.3 Duratec

32,00 €

ACL Meßstreifen für Gleitlager / Flexigauge AR-1 (Rot)

1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.

16,00 €

TI Automotive Brushless Fuel Pump Kit BKS1002 Screw Type 100132778

Low Amp Draw
Capable of handling 1000hp+ under standard operating conditions

Fittings In (mm):-19
Fittings Out (mm):- 11

Body Diameter :- 38.25mm
Length (Overall) :- 155
Pump:- BKS1002
Voltage DC:- 12
Flow Ltr/Hr (Max):-594
Flow Ltr/Hr @ 3 Bar (44psi):- 525
Flow Ltr/Hr @ 5 Bar (73psi):- 465
Flow Ltr/Hr @ 7 Bar (73psi):- 375
Max Pressure:- 8.2

499,00 €

Honda 2.0 2.2 F20C F22C Supertech Einlassventil HIVN-1030F STD

Product detailed specification
Model number	HIVN-1030F
Head diameter	36mm
Stem diameter	5.48mm
Length	109.85mm
Material	Black nitrited stainless steel
Fits for	Honda S2000 - 2.0 2.2 (F20C, F22C)

28,00 €

Toyota Yaris GR G16E-GTS Athena Cooper Ring cylinder Zylinderkopfdichtung...

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

189,00 €

BMW E30 E36 E34 E39 E60 2.0 2.3 2.5 2.8 3.0 M50 M52 M54 FCP Renn-Tassenstößel...

Äußere Durchmesser - 35.00mm
Innere Durchmesser - 33.10mm
Äußer Höhe - 26.00mm
Stiellänge - 14.70mm
Stieldurchmesser - 7.00mm
24 Stk. FCP Engineering mechanische Tassenstößel
Schmiedestahl, Nitrid gehärteter Oberfläche, HRC 50
Installierte Tassenstoßelhöhe zu Nockenwelle muss mit Ventilkappen eingestellt werden (nicht enthalten)

540,00 €

Ford Cosworth 2.0 16V (N5B) 2.0 16V Ferrea Auslassventil +1mm F6748

The 6000 Series Competition Valves are designed to provide excellent reliability in an environment of high spring pressures and roller cams, at a budget price. They have higher fatigue resistance and tensile strengths than our competitor’s best offerings.

To manufacture the valves we use our exclusive two-step slow forging process using EV8 stainless steel on both intake and exhaust valves.We provide a special heat-treatment and stress relieving process, along with hard chrome stems and friction-welded hard tips. We finish with a swirl polished head. The valves feature flow improvements to deliver the power needed for today’s sophisticated racing engines.

29,00 €

Ford Cosworth 2.0 16V (N5B) 2.0 16V Ferrea Auslassventil STD F6746

The 6000 Series Competition Valves are designed to provide excellent reliability in an environment of high spring pressures and roller cams, at a budget price. They have higher fatigue resistance and tensile strengths than our competitor’s best offerings.

To manufacture the valves we use our exclusive two-step slow forging process using EV8 stainless steel on both intake and exhaust valves.We provide a special heat-treatment and stress relieving process, along with hard chrome stems and friction-welded hard tips. We finish with a swirl polished head. The valves feature flow improvements to deliver the power needed for today’s sophisticated racing engines.

29,00 €

Honda 2.0 2.4 K20 K24 Supertech Inconel Auslassventil Inconel HEVI-1020D (STD)

Product detailed specification
Model number	HEVI-1020D
Head diameter	30.00mm
Stem diameter	5.45mm
Length	108.65mm
Material	Inconel
Fits for	Honda K20 K24

40,00 €

Audi / VW 2.0 16V TSI Gen3 EA888 Mahle Schmiedekolben CR 9.6 83mm 930286368

Bore size	83.00mm
Stroke	92.80mm
Mahle compression ratio (CR)	9.6:1
OEM compression ratio (CR)	9.6:1
Dome volume (CC)	-7.10cm³
Compression height (CH)	29.60mm
Pin diameter	23mm
Features	PowerPak Plus M142 Alloy Hard Anodized Top Ring Groove For Extreme Duty Applications
Fits for	VW / Audi - 2.0 TSI EA888 (CAWA, VAWB, CCTA, CCZB, CAEA)