Es gibt keine Artikel im Warenkorb
| ENGINE BEARINGS | ||||
 |
CON ROD BEARING SET |
MAIN BEARING SET |
||
| Part# | Part# | |||
| 5M1112H |
||||
| Sizes | STD, .025, .25, .50 | |||
| Oil Clearance | Standard | |||
| Half Type | Upper & Lower | |||
| Material | Tri-Metal | |||
| Min Std Shaft Size |
2.3606" / 59.959mm |
|||
| Max Std Shaft Size |
2.3611" / 59.972mm |
|||
| Min Std Tunnel Size |
2.5062" / 63.657mm |
|||
| Max Std Tunnel Size |
2.5069" / 63.675mm |
|||
| Max Wall at Crown |
0.0720" / 1.829mm |
|||
| Max Overall Length |
0.723" / 18.36mm # 2, 4 (1113H) 1.005 " / 25.52mm # 1, 3, 5 (1112H) |
|||
| Notes | Set contains 6 x 1112H and 4 x 1113H shells. | |||
|
Diagram |
|
|||
Teilenummer: FCPPASTR820095/5
Hersteller: FCP Engineering
Geschmiedete Hochleistungskolben für verschiedene Anwendungen in allen Motorvarianten für Rennsport und Straßengebrauch.
Hergestellt aus 4032-T6, Kolbenhemd sind Molibden beschichtet.
Jeder Satz enthält auch Ringe und HD-Serie Kolbenbolzen.
Bohrungdurchmesser: 82.00mm
Verdichtung (CR): 9.5:1
Kompressionhöhe: 29.00mm
Kolbenbolzen: 22mm
Kurbelwellenhub: 95.50mm mit Diesel 236mm Motorblock
Audi 200, S2, RS2, S4, S6 - 2.2 2.5 20V Turbo
Satz enthält:
1 Kurbelwellendichtung Rückseite
1 Kurbelwellendichtung Vorderseite
1 Ölfiltergehäuse Dichtung
1 Ölpumpendichtung
1 universal Dichtmasse
und andere.
Passt für:
VAG group belt driven engines (Audi, Seat, Skoda, VW) - 2.0 16V TFSI EA113 EA113 (AXX, BGB, BHZ, BPG, BPJ, BPY, BUL, BWA, BWE, BWT, BYK, BYD, BZC, CDLA, CDLB, CDLC, CDLF, CDMA)
LM-2 (3837): Complete Lambda Cable Kit (8 ft.)
The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meter’s award-wining digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.
Key features:
The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. With the provided LM Programmer software these analog outputs may also be defined by the user.
|
Product detailed specification |
|
|
Bore size |
87.50mm |
|
Stroke |
91.00mm |
|
JE Pistons compression ratio (CR) |
11.5:1 |
|
OEM compression ratio (CR) |
11.3:1 |
|
Dome volume (CC) |
-13.80cm3 |
|
Compression height (CH) |
32.30mm |
|
Pin diameter |
21mm |
|
Features |
Accepts Turbo and Nitrous; FSR beschichtete Kolbenhemd |
|
Fits for |
BMW M3 E46 - 3.2 S54B32 |
|
Product detailed specification |
|
|
Bore size |
85.50mm |
|
Stroke |
88.00mm |
|
JE Pistons compression ratio (CR) |
9.0:1 |
|
OEM compression ratio (CR) |
8.3:1 |
|
Dome volume (CC) |
-13.30cm3 |
|
Compression height (CH) |
34.70mm |
|
Pin diameter |
22mm |
|
Features |
Accepts Turbo and Nitrous; asymmetrical FSR series |
|
Fits for |
Mitsubishi EVO 8-9 - 2.0 16V (4G63) |
|
Product detailed specification |
|
|
Model number |
HIVN-200F |
|
Head diameter |
33.00mm |
|
Stem diameter |
5.48mm |
|
Length |
102.50mm |
|
Material |
Black nitrited stainless steel |
|
Fits for |
Honda B16A B17A B18C |
✪ Compressor side Technical features:
✪ Turbine side Technical features:
Detailierte Productinformation
Hersteller: FCP Engineering
Model: FCPRHA153588322
Profil: H-Schaft
C bis C: 153mm
Großer End Durchmesser: 58.83mm
Kleiner End Durchmesser: 22mm
Gemacht aus: Schmiedestahl 4340 EN24er
Quantität: 10 Stk., 20 Stk. ARP2000 5/16" Pleuelschreuben
Pleuel gut für: 1500HP+ und 9000RPM
Passend für: Audi RS6 C6 - 5.0 V10 Biturbo (BUH)
|
Detaillierte Produktinformationen |
|
|
Kolbendurchmesser |
81.50mm |
|
Kurbenwellenhub |
86.40mm |
|
JE Pistons Verdichtung (CR) |
9.0:1 |
|
OEM Verdichtung (CR) |
9.3:1 |
|
Kuppel Volumen (CC) |
-3.90cm3 |
|
Kompressionshöhe (CH) |
30.70mm |
|
Kolbenbolzen |
21mm |
|
Eigenschaften |
Akzeptiert Turbo und Nitrous; voller runder Kolbenhemd |
|
Passend für |
Audi S4, RS4, A6 - 2.7 30V |
Hersteller: ACL Bearing Company
Modell: 4B1490H-0.25
BMW - 1.6 1.8 1.9 (M40, M42, M43, M44)
