Audi S2 RS2 S4 S6 2.2 2.3 2.5 20V

Kit beinhaltet:

1 x Blockversteifungsplatte (10mm Dicke)
12 x Distanzhülsen
12 x Schrauben aus 12.9 Stahl

Kit beinhaltet:

1 x Blockversteifungsplatte (10mm Dicke)
12 x Distanzhülsen
12 x ARP Haupt Stehbolzensatz

Detailierte Produktinformationen
Kopfdurchmesser	28mm
Ventilschaftdurchmesser	7mm
Länge	98mm
Passend für	Audi / VW - 1.8 16V, 2.0 16V, 2.2T 20V, 2.3 20V (KR, PL, 6A, 9A, ABF, 3B, AAN, ABY, ADU, 7A)

Detailierte Produktinformationen
Kopfdurchmesser	32mm
Ventilschaftdurchmesser	7mm
Länge	95.5mm
Passend für	Audi / VW - 1.8 16V, 2.0 16V, 2.2T 20V, 2.3 20V (KR, PL, 6A, 9A, ABF, 3B, AAN, ABY, ADU, 7A)

8740 Chrome Moly: Until the development of today’s modern alloys, chrome moly was popularly considered a high strength material. Now viewed as only moderate strength, 8740 chrome moly is seen as a good tough steel, with adequate fatigue properties for most racing applications, but only if the threads are rolled after heat-treatment, as is the standard ARP production practice. Typically, chrome moly is classified as a quench and temper steel, that can be heat-treated to deliver tensile strengths between 180,000 and 210,000 psi

Tassenstössel Daten:
Äußere Durchmesser - 34.97mm
Innere Durchmesser - 33.10mm
Äußer Höhe - 26.30mm
Stiellänge - 14.70mm
Stieldurchmesser - 7.00mm
Gewicht - 50g
20 Stk. FCP Engineering mechanische Tassenstößel.
Schmiedestahl, Nitrid gehärteter Oberfläche, HRC 50.
Installierte Tassenstoßelhöhe zu Nockenwelle muss mit Ventilkappen eingestellt werden (nicht enthalten).

The 6000 Series Competition Valves are designed to provide excellent reliability in an environment of high spring pressures and roller cams, at a budget price. They have higher fatigue resistance and tensile strengths than our competitor’s best offerings.

To manufacture the valves we use our exclusive two-step slow forging process using EV8 stainless steel on both intake and exhaust valves.We provide a special heat-treatment and stress relieving process, along with hard chrome stems and friction-welded hard tips. We finish with a swirl polished head. The valves feature flow improvements to deliver the power needed for today’s sophisticated racing engines.

The 6000 Series Competition Valves are designed to provide excellent reliability in an environment of high spring pressures and roller cams, at a budget price. They have higher fatigue resistance and tensile strengths than our competitor’s best offerings.

To manufacture the valves we use our exclusive two-step slow forging process using EV8 stainless steel on both intake and exhaust valves.We provide a special heat-treatment and stress relieving process, along with hard chrome stems and friction-welded hard tips. We finish with a swirl polished head. The valves feature flow improvements to deliver the power needed for today’s sophisticated racing engines.