BMW (17)

BMW M5 F10/F90 S63B44 ARP CA625+ Zylinderkopf Stehbolzensatz 201-4703

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

1.599,00 €

Toyota / BMW B58B30 Athena Cooper Ring Zylinderkopfdichtung 84x1mm 330155R

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330155R

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

325,00 €

Cometic BMW 1.8 1.9 M42 M44 MLS Zylinderkopf Dichtung 86x1.3mm C4349-051

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

199,00 €

Cometic BMW S14B20 S14B23 1986-91 MLS Zylinderkopf Dichtung 94.5x1.3mm C4295-051

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

205,00 €

BMW 3.0 N54B30 N55B30 Athena Cooper Ring Zylinderkopfdichtung 86x1.5mm 330074R

Athena Racing 330-Serie Cooper Ring Zylinderkopfdichtung Satz.
Für spezifische Hochpferdestärken Motorleistungen erheblich durch den Einsatz Athena Cooper Ring Dichtungen verbessert werden, die mit INOX Stahlring geliefert werden. Diese Technologie bietet gegenüber herkömmlichen Feuerring Lösungen.
Cooper Rings sind Übermaß (auch passt für übergroße Bohrungen).
Teilenummer: 330074R
Dichtungsdicke: 1.50mm
Zylinderdurchmesser: 86.00mm

Teilenummer beginnt 330
Athena Vorteile
Verstärktes Material	OE genehmigt Asbestfreie Verbund Rohstof
Edelstahlringen (AISI304)	Einzelne Edelstahlringe gewährleisten maximale Besiegelung um die Zylinderbohrungen, unter extremen Bedingungen, auch mit dem NOS-System und/oder Turbo-Aufladung, wenn die MLS Dichtung unfähig abgedichtet Brennkammer arbeitet. Zylinderkopf und Motorblock benötigt keine speziellen Behandlungen.
Silikon Beading	Silikon Beading wird auf kritische Bereiche angewendet zu verbessern Abdichten um alle Kühlwasser- und Ölkanäle.

325,00 €

BMW M3 3.2 S54B32 JE Pistons Schmiedekolben CR 11.5:1 87.00mm

BMW M3 3.2 S54B32 JE Pistons Schmiedekolben CR 11.5 87.5mm 297118

Product detailed specification
Bore size	87.50mm
Stroke	91.00mm
JE Pistons compression ratio (CR)	11.5:1
OEM compression ratio (CR)	11.3:1
Dome volume (CC)	-13.80cm³
Compression height (CH)	32.30mm
Pin diameter	21mm
Features	Accepts Turbo and Nitrous; FSR beschichtete Kolbenhemd
Fits for	BMW M3 E46 - 3.2 S54B32

Dank der patentierten Perfect Skirt-Beschichtung von JE Pistons gehören Kolbenschlag, falscher Schlag und Kaltstart der Vergangenheit an.

Erstmals können 2618-Legierungskolben mit Kolben-zu-Wand-Abständen eingebaut werden, mit Kolben-zu-Wand-Abständen in der Nähe eines OEM-Kolbens!

1.349,00 €

BMW BMEVI-1030S Standard 1.8/2.5/2.8/3.0 auslassventil

BMW M42 M50 M52 M54, S42/S50/S52 USA Supertech Auslassventil BMEVI-1030S STD

Product detailed specification
Model number	BMEVI-103S
Head diameter	30.50mm
Stem diameter	5.96mm
Length	105.65mm
Material	Inconel
Fits for	BMW - 1.8 2.5 2.8 3.0 (S42,M42,M50,S50,M52,S52,M54)

49,00 €

BMW 4.4 V8 S63 FCP konisch Ventilfeder und Federteller Kit

Ventilfedern Daten
Hergestellt aus Chrom-Silizium Stahl SAE9254-V
Mit diesem Satz wird das Risiko des Ventilflatterns und moglichen Motorschadens minimiert.
Für Motoren mit Serien und Renn Nockenwellen und denen Drehzahlen von über 7500 RPM.
Kit enthält:
32 Stk. konische Federn
32 Stk. titan Federtellern

1.099,00 €

BMW M5 E34 S38B36 ACL Race Series Pleuellager Satz 6B1568H-STD

199,00 €

BMW / Mini 2.0 B48B20 / B48A20 JE Pistons Schmiedekolben Kit CR 9.5 82mm...

Product detailed specification
Bore size	82.00mm
Stroke	94.60mm
JE Pistons compression ratio (CR)	10.5:1
OEM compression ratio (CR)	10.2:1
Dome volume (CC)	-11.10cm³
Compression height (CH)	33.25mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous
Fits for	BMW / Mini - 2.0 Turbo (B48B20, B48A20)

949,00 €

Cometic BMW 1.8 1.9 M42 M44 MLS Zylinderkopf Dichtung 86x1.9mm C4349-075

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

245,00 €

BMW CR6640XP 2.0 2.2 2.3 2.5 2.7 2.8 3.0 pleuellager

BMW M3 E30 S14 King Racing Pleullager Satz CR4596XP-STD

Upper	Lower	Quantity	Position	Crankshaft	Housing	Max Length	Max Wall
SX		4		47.99 / 47.98	52.01 / 52.00	20.0	1.994

93,00 €