VW 1.8 16V KR PL

Tassenstössel Daten:
Äußere Durchmesser - 34.97mm
Innere Durchmesser - 33.10mm
Äußer Höhe - 26.30mm
Stiellänge - 14.70mm
Stieldurchmesser - 7.00mm
Gewicht - 50g
16 Stk. FCP Engineering mechanische Tassenstößel.
Schmiedestahl, Nitrid gehärteter Oberfläche, HRC 50.
Installierte Tassenstoßelhöhe zu Nockenwelle muss mit Ventilkappen eingestellt werden (nicht enthalten).

ENGINE BEARINGS
	CON ROD BEARING SET
	Part#
	4B1606H	4B1606HX
Sizes	STD, .025, .25, .50	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical Halves
Material	Tri-metal Hardened steel backs
Min Std Shaft Size	1.8802" /47.758mm
Max Std Shaft Size	1.8810" /47.778mm
Min Std Tunnel Size	1.9921" /50.600mm
Max Std Tunnel Size	1.9929" /50.619mm
Max Wall at Crown	0.0553" / 1.405mm	0.0548" /1.392mm
Max Overall Length	0.748" / 19.00mm
Notes	Bearing has 1.65mm oil hole at crown
Diagram        (Top View)

CT-1 is a Dry Film Lubricant coating that helps reduce friction and abrasive wear. It provides intermittent dry lubrication and is not affected by dust or dirt. CT-1 is specifically engineered to withstand the extreme conditions of today's high performance engines. Professional engine builders enjoy a higher level of confidence with increased embedability, strength and durability.

ENGINE BEARINGS
	MAIN BEARING SET
	Part#
	5M1644H	5M1644HX
Sizes	STD, .25, .50	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Upper & Lower
Material	Tri-metal
Min Std Shaft Size	2.1243in / 53.958mm
Max Std Shaft Size	2.1251in / 53.978mm
Min Std Tunnel Size	2.3228in / 59.000mm
Max Std Tunnel Size	2.3236in / 59.019mm
Max Wall at Crown	0.0985in / 2.502mm	0.0980in / 2.489mm
Max Overall Length	0.728in / 18.49mm
Notes	Set contain 6 x 1648H and 4 x 1644H shells. Use 1648H shell in #4 position as upper and lower.
Diagram        (Top View)

Engines VAG group 4 cylinder engines 1.6 1.8 2.0 16-20V (KR, PL, AEB, etc.)

Part number: FCPPASTR815085/4
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 81.50mm
Compression ratio (CR): 8.5:1
Compression height: 29.00 mm
Pin diameter: 22mm
Stroke: 95.50mm with 236mm diesel engine block
VAG - 2.0 16V Turbo
Connecting rod length must 159mm

Part number: FCPPASTR820085/4
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 82.00mm
Compression ratio (CR): 8.5:1
Compression height: 29.00 mm
Pin diameter: 22mm
Stroke: 95.50mm with 236mm diesel engine block
VAG - 2.0 16V Turbo
Connecting rod length must 159mm

Part number: FCPPASTR815095/4
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 81.50mm
Compression ratio (CR): 9.5:1
Compression height: 29.00 mm
Pin diameter: 22mm
Stroke: 95.50mm with 236mm diesel engine block
VAG - 2.0 16V Turbo
Connecting rod length must 159mm

Part number: FCPPASTR820095/4
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 82.00mm
Compression ratio (CR): 9.5:1
Compression height: 29.00 mm
Pin diameter: 22mm
Stroke: 95.50mm with 236mm diesel engine block
VAG - 2.0 16V Turbo
Connecting rod length must 159mm

Tassenstössel Daten:
Äußere Durchmesser - 34.97mm
Innere Durchmesser - 33.10mm
Äußer Höhe - 26.30mm
Stiellänge - 14.70mm
Stieldurchmesser - 7.00mm
Gewicht - 50g
8 Stk. FCP Engineering mechanische Tassenstößel.
Schmiedestahl, Nitrid gehärteter Oberfläche, HRC 50.
Installierte Tassenstoßelhöhe zu Nockenwelle muss mit Ventilkappen eingestellt werden (nicht enthalten).

The 6000 Series Competition Valves are designed to provide excellent reliability in an environment of high spring pressures and roller cams, at a budget price. They have higher fatigue resistance and tensile strengths than our competitor’s best offerings.

To manufacture the valves we use our exclusive two-step slow forging process using EV8 stainless steel on both intake and exhaust valves.We provide a special heat-treatment and stress relieving process, along with hard chrome stems and friction-welded hard tips. We finish with a swirl polished head. The valves feature flow improvements to deliver the power needed for today’s sophisticated racing engines.

The 6000 Series Competition Valves are designed to provide excellent reliability in an environment of high spring pressures and roller cams, at a budget price. They have higher fatigue resistance and tensile strengths than our competitor’s best offerings.

To manufacture the valves we use our exclusive two-step slow forging process using EV8 stainless steel on both intake and exhaust valves.We provide a special heat-treatment and stress relieving process, along with hard chrome stems and friction-welded hard tips. We finish with a swirl polished head. The valves feature flow improvements to deliver the power needed for today’s sophisticated racing engines.