Es gibt keine Artikel im Warenkorb
|
Product detailed specification |
|
|
Bore size |
86.50mm |
|
Stroke |
86.00mm |
|
Wiseco compression ratio (CR) |
9.1-9.25:1 |
|
OEM compression ratio (CR) |
8.5:1 |
|
Dome volume (CC) |
-12cm3 |
|
Compression height (CH) |
32.00mm |
|
Pin diameter |
22mm |
|
Features |
Accepts Turbo and Nitrous |
|
Fits for |
Nissan 180SX, 200SX (S13, S14) 2.0 16V (SR20DET) |
Diameter: 240mm
Compared to volume production pressure plates, SACHS Performance pressure plates have a higher transmittable torque and are less sensitive to thrust loading. Depending on the requirements, they are used with different discs. Higher pedal forces might occur.
| AUDI : | ||
| A4 B5 (8D2) |  |
|
| S4 quattro (195 kW ; 09/1997 - 09/2001) | ||
| A4 B5 Avant (8D5) | |
|
| S4 quattro (195 kW ; 09/1997 - 09/2001) | ||
| A6 C5 (4B2) | |
|
| S6 quattro (250 kW ; 09/1999 - 01/2005) | ||
| A6 C5 Avant (4B5) | |
|
| S6 quattro (250 kW ; 09/1999 - 01/2005) | ||
| A8 D2 (4D2, 4D8) | |
|
| S 8 quattro (265 kW ; 06/1999 - 09/2002) | ||
| VOLKSWAGEN : | ||
| PASSAT B5.5 (3B3) | |
|
| 4.0 W8 4motion (202 kW ; 09/2001 - 09/2004) | ||
| PASSAT B5.5 Variant (3B6) | |
|
| 4.0 W8 4motion (202 kW ; 09/20 | ||
| ENGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 4B2166H |
4B2166HX |
|
| Sizes | STD, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
2.0468 in / 51.990 mm |
|
| Max Std Shaft Size | 2.0472 in / 52.000 mm | |
| Min Std Tunnel Size | 2.1654 in / 55.000 mm | |
| Max Std Tunnel Size | 2.1661 in / 55.020 mm | |
| Max Wall at Crown | 0.0589 in / 1.496 mm | 0.0584 in / 1.483 mm |
| Max Overall Length |
0.792 in / 20.12 mm |
|
| Notes | ||
|
Diagram |
 |
|
| ENGINE BEARINGS | ||
|
CON ROD BEARING SET |
|
| Part# | ||
| 4B1925H |
4B1925HX |
|
| Sizes | STD, 025, .25 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.7707in / 44.976mm |
|
| Max Std Shaft Size |
1.7717in / 45mm |
|
| Min Std Tunnel Size |
1.8898in / 48mm |
|
| Max Std Tunnel Size |
1.8898in / 48mm |
|
| Max Wall at Crown |
0.0591in / 1.502mm |
0.0586in /1.489mm |
| Max Overall Length |
0.6890in / 17.5mm |
|
| Notes | ||
|
Diagram |
 |
|
