Click here to open old website version
All categories
Parts by Car
Go
Parts by Car
Go
Parts by:
Category

VW 2.0 8V-16V 2E ABF

VAG 1.6 16V FCP H-beam steel connecting rods 149mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHA14950620-4
Profile: H-beam
C to C: 149mm
Big end diameter: 50.6mm
Pin diameter: 20mm
Quantity: 4 pcs., 8 pcs. ARP2000 5/16" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 600HP (4 cylinder)
Advertised RPM rating: 9000RPM
VAG - 1.6 16V

€399.00
Audi / VW 2.0 8V, 2.0 16V ABF, ABA, AAD, 2E FCP steel con rods 159mm
Audi / VW 2.0 8V-16V AAD ABF 2E FCP H-beam steel connecting rods 159mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHVW15950621-4
Profile: H-beam
C to C: 159mm
Big end diameter: 50.6mm
Pin diameter: 20/21mm (optional)
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 600HP (4 cylinder)
Advertised RPM rating: 9000RPM

Audi / VW 2.0 8V, 2.0 16V engines with 236mm block (ABF, ABA, AAD, 2E)
€399.00
Kolbenschmidt plain bearing measuring tape/plastic gauge 50009880

Part number 50009880.
Kolbenschmidt plain bearing measuring tape / plastic gauge kit (10 pcs.).
Measuring strips for the determination of bearing clearance for plain bearings

€13.00
ACL plain bearing measuring tape/flexigauge AG-1 (Green)
  1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
  2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
  3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
    DO NOT REVOLVE THE SHAFT OR BEARINGS.
  4. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
  5. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2)
  6. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.


€15.00
Permatex Ultra Slick assembly lubricant for engine bearings 118ml

Part number 81950
Permatex Ultra Slick assebly lubricant, lube oil for engine bearings.
Capacity 118 ml

€12.00
ARP connecting rod bolt stretch gauge 100-9942
This gauge has been developed to provide optimum accuracy in determining the correct pre-load in the installed rod bolt. The products main purpose is to obtain the proper torque load when installed in the engine, and monitoring the condition of the bolt while in use. This is particularly useful if an engine is internally monitored regularly.
€279.00