Audi S2 RS2 S4 S6 2.2 2.5 20V

Audi S2 RS2 S4 S6 2.2T 20V 3B AAN FCP X-beam steel connecting rods 144mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRXA14450620-5
Profile: X-beam (Oiling channel from big end to piston pin)
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 20mm
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1000+HP (5 cylinder)
Advertised RPM rating: 9000RPM
Audi 200, Quattro, S2, RS2, S4, S6 - 2.2T 20V (3B, ABY, AAN, ADU)

€719.00

Audi 200 S2 RS2 S4 S6 2.5 2.6 20V Stroker FCP X-beam connecting rods 155mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRXA15550620
Profile: X-beam (Oiling channel from big end to piston pin)
C to C: 155mm
Big end diameter: 50.6mm
Pin diameter: 20mm
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1000+HP (5 cylinder)
Advertised RPM rating: 9000RPM
Audi 200, Quattro, S2, RS2, S4, S6 - 2.2T 20V (3B, ABY, AAN, ADU)

Engine setup: 2.5tdi 236mm block with 95.5 crankshaft and standard 2.2 20V Pistons

€719.00

Audi 200 S2 RS2 S4 S6 2.5 2.6 20V Stroker FCP X-beam connecting rods 159mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRXA15950622
Profile: X-beam (Oiling channel from big end to piston pin)
C to C: 159mm
Big end diameter: 50.6mm
Pin diameter: 22mm
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1000+HP (5 cylinder)
Advertised RPM rating: 9000RPM
Audi Quattro 200 S2 RS2 S4 S6 - 2.5 2.6 20V Stroker

Engine setup: 2.5 TDi 236mm block with 95.5 crankshaft and 2.2T 20V stroker pistons

€719.00

Kolbenschmidt plain bearing measuring tape/plastic gauge 120000417001

Part number 50009880.
Kolbenschmidt plain bearing measuring tape / plastic gauge kit (10 pcs.).
Measuring strips for the determination of bearing clearance for plain bearings

€18.00

ARP connecting rod bolt stretch gauge 100-9942

This gauge has been developed to provide optimum accuracy in determining the correct pre-load in the installed rod bolt. The products main purpose is to obtain the proper torque load when installed in the engine, and monitoring the condition of the bolt while in use. This is particularly useful if an engine is internally monitored regularly.

€312.00

FCP Engineering logo sticker 25x9,5cm

€3.00

FCP Engineering logo sticker 20x9cm

€2.00