2JZ-GE / 2JZ-GTE

Kolbenschmidt plain bearing measuring tape/plastic gauge 120000417001

Part number 50009880.
Kolbenschmidt plain bearing measuring tape / plastic gauge kit (10 pcs.).
Measuring strips for the determination of bearing clearance for plain bearings

€18.00

ACL plain bearing measuring tape/flexigauge AG-1 (Green)

1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.

€16.00

Permatex Ultra Slick assembly lubricant for engine bearings 118ml (1 pc.)

€18.00

Toyota 2.5 3.0 2JZGTE ACL Race connecting rod bearings 6B8100H-STD

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Identical halves
Material	Tri-metal Hardened steel backs
Min. Std Shaft Size	2.0465in / 51.981mm
Max. Std Shaft Size	2.0472in / 52mm
Min. Std Tunnel Size	2.1663in / 55.024mm
Max. Std Tunnel Size	2.167in / 55.042mm
Max Wall at Crown	0.0593in / 1.506mm
Max Overall Length	0.7598in / 19.3mm
Weight	0.253
Notes	0

€109.00

Toyota 2.5 3.0 2JZGTE ACL Race connecting rod bearings 6B8100HX-STD

ENGINE BEARINGS
	CON ROD BEARING SET
	Part#
	6B8100H	6B8100HX
Sizes	STD, .025, .25	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical halves
Material	Tri-metal Hardened steel backs
Min Std Shaft Size	2.0465in / 51.981mm
Max Std Shaft Size	2.0472in / 52mm
Min Std Tunnel Size	2.1663in / 55.024mm
Max Std Tunnel Size	2.167in / 55.042mm
Max Wall at Crown	0.0593in / 1.506mm	0.0588in / 1.493mm
Max Overall Length	0.7598in / 19.3mm
Notes
Diagram (Top View)

Engines Toyota - 2.5 3.0 (1JZGE, 1JZGTE, 2JZGE, 2JZGTE)

€109.00

Toyota 2.5 3.0 2JZGTE ACL Race connecting rod bearings 6B8100H-0.25

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Identical halves
Material	Tri-metal Hardened steel backs
Min. Std Shaft Size	2.0465in / 51.981mm
Max. Std Shaft Size	2.0472in / 52mm
Min. Std Tunnel Size	2.1663in / 55.024mm
Max. Std Tunnel Size	2.167in / 55.042mm
Max Wall at Crown	0.0593in / 1.506mm
Max Overall Length	0.7598in / 19.3mm
Weight	0.253
Notes	0

€109.00

Toyota 2.5 3.0 2JZGTE ACL Race Calico connecting rod bearings 6B8100HC-STD

CT-1 is a Dry Film Lubricant coating that helps reduce friction and abrasive wear. It provides intermittent dry lubrication and is not affected by dust or dirt. CT-1 is specifically engineered to withstand the extreme conditions of today's high performance engines. Professional engine builders enjoy a higher level of confidence with increased embedability, strength and durability.

€199.00

Toyota 2.5 3.0 2JZGTE ACL Race Calico connecting rod bearings 6B8100HXC-STD

€199.00

Toyota 2.5 3.0 2JZGE 2JZGTE ACL thrust washers 2T8103-STD

Part number 2T8103-STD
ACL thrust washers kit
Toyota 2.5 3.0 - (1JZGE, 1JZGTE, 2JZGE, 2JZGTE)

€28.00

Toyota 2.5 3.0 2JZGTE ACL Race main bearings 7M8103H-STD

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Upper & Lower
Material	Tri-Metal
Min. Std Shaft Size	2.4403in / 61.984mm
Max. Std Shaft Size	2.441in / 62.001mm
Min. Std Tunnel Size	2.5992in / 66.02mm
Max. Std Tunnel Size	2.5998in / 66.035mm
Max Wall at Crown	0.0789in / 2.004mm
Max Overall Length	0.7874in / 20mm (8103H/HX) 0.9055in / 23mm (8104H/HX)
Weight	0.44
Notes	0

€199.00

Toyota 2.5 3.0 2JZGTE ACL Race main bearings 7M8103HX-STD

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Upper & Lower
Material	Tri-Metal
Min. Std Shaft Size	2.4403in / 61.984mm
Max. Std Shaft Size	2.441in / 62.001mm
Min. Std Tunnel Size	2.5992in / 66.02mm
Max. Std Tunnel Size	2.5998in / 66.035mm
Max Wall at Crown	0.0789in / 2.004mm
Max Overall Length	0.7874in / 20mm (8103H/HX) 0.9055in / 23mm (8104H/HX)
Weight	0.44
Notes	0

€199.00

Toyota 2.5 3.0 2JZGTE ACL Race main bearings 7M8103H-0.25

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Upper & Lower
Material	Tri-Metal
Min. Std Shaft Size	2.4403in / 61.984mm
Max. Std Shaft Size	2.441in / 62.001mm
Min. Std Tunnel Size	2.5992in / 66.02mm
Max. Std Tunnel Size	2.5998in / 66.035mm
Max Wall at Crown	0.0789in / 2.004mm
Max Overall Length	0.7874in / 20mm (8103H/HX) 0.9055in / 23mm (8104H/HX)
Weight	0.44
Notes	0

€199.00