Click here to open old website version
All categories
Parts by Car
Go
Parts by Car
Go
Parts by:
Category

Audi RS6 4.2 V8 5.0 V10

Audi RS6 C5 4.2 V8 Biturbo FCP H-beam steel connecting rods 154mm
Audi RS6 C5 4.2 V8 Biturbo FCP H-beam steel connecting rods 154mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHA15456821-8
Profile: H-beam
C to C: 154mm
Big end diameter: 56.8mm
Pin diameter: 21mm
Quantity: 8 pcs., 16 pcs. ARP2000 5/16" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1000HP (8 cylinder)
Advertised RPM rating: 9000RPM

Audi RS6 C5 V8 - 4.2 Biturbo (BCY, BRV)
€749.00
Audi RS6 C6 5.0 V10 BITURBO FCP H-beam steel connecting rods 153mm
Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHA153588322
Profile: H-beam
C to C: 153mm
Big end diameter: 58.83mm
Pin diameter: 22mm
Quantity: 10 pcs., 20 pcs. ARP2000 5/16" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1500HP+
Advertised RPM rating: 9000RPM
Audi RS6 C6 - 5.0 V10 Biturbo (BUH)
€999.00
Kolbenschmidt plain bearing measuring tape/plastic gauge 50009880

Part number 50009880.
Kolbenschmidt plain bearing measuring tape / plastic gauge kit (10 pcs.).
Measuring strips for the determination of bearing clearance for plain bearings

€13.00
ACL plain bearing measuring tape/flexigauge AG-1 (Green)
  1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
  2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
  3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
    DO NOT REVOLVE THE SHAFT OR BEARINGS.
  4. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
  5. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2)
  6. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.


€15.00
Permatex Ultra Slick assembly lubricant for engine bearings 118ml

Part number 81950
Permatex Ultra Slick assebly lubricant, lube oil for engine bearings.
Capacity 118 ml

€12.00
ARP connecting rod bolt stretch gauge 100-9942
This gauge has been developed to provide optimum accuracy in determining the correct pre-load in the installed rod bolt. The products main purpose is to obtain the proper torque load when installed in the engine, and monitoring the condition of the bolt while in use. This is particularly useful if an engine is internally monitored regularly.
€279.00