Click here to open old website version
All categories
Parts by Car
Go
Parts by Car
Go
Parts by:
Category

Fiat

Fiat 1.4-1.6 16V Turbo 128.52mm
Fiat 1.4 1.6 16V Turbo FCP H-beam steel connecting rods 128.52mm
Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHF12852486322
Profile: H-beam
C to C: 128.52mm
Big end diameter: 48.63mm
Pin diameter: 22mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 600HP (4 cylinder)
Advertised RPM rating: 9000RPM
Fiat  - 1.4 1.6 16V Turbo
€399.00
Lancia Delta Integrale 2.0 16V Athena gasket 85.5x1.8mm 330039R
Lancia Delta Integrale 2.0 16V Athena Cooper Ring cylinder head gasket...
Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine  performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).

Part number 330039R
Gasket thickness: 1.80mm
Bore size: 85.50mm

Part number starting with 330

Athena advantages

Reinforced material

Asbestos free composite raw material OE approved

Stainless steel ring (AISI304)

Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required

Silicon beading

Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages



€210.00
Fiat 1.4 Turbo 146 A8.000 Athena MLS head gasket 82.5x1.3mm 338006R
Fiat 1.4 Turbo 146 A8.000 Athena MLS cylinder head gasket 82.5x1.3mm 338006R

Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product.
The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338006R
Gasket thickness: 1.30mm
Bore size: 82.50mm
 

Teilenummer beginnt 338

Athena Vorteile

Optimierte Radius Prägeform

Die runde Form der Prägung erhöht Besiegelung auf Zylinderbohrung, Öl- und Kühlwasserkanäle und und verbessert der Rückfederung Stärke

Fortschrittliche Stoppertechnik

Der Stand der Technik erhöht den Dichtungsdruck um den Zylinder. Höchste Dichteigenschaften bei Hochleistungsmotoren

Beschichtungstechnik

Entworfen und konstruiert von Athena die spezielle Beschichtung auf Stahloberflächen aufgebracht, verbessert die

€125.00
Fiat Punto S2000 2.0 Athena MLS head gasket 85.8x0.85mm 338408R
Fiat Punto S2000 2.0 Athena MLS cylinder head gasket 85.8x0.85mm 338408R

Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number 338408R
Gasket thickness: 0.85mm
Bore size: 85.80mm

Part number starting with 338

Athena advantages

Optimized radius embossing shape

The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength

Advanced stopper technology

State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines

Coating technology

Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket

€140.00
Fiat Coupe Turbo 20V 175A3 / 182A1 JE Pistons kit 82.50mm CR 8.0 312404

Product detailed specification

Bore size

82.50mm

Stroke

75.60mm

JE Pistons compression ratio (CR)

8.0:1

OEM compression ratio (CR)

8.5:1/10.5:1

Dome volume (CC)

-8.00cm3

Compression height (CH)

32.80mm

Pin diameter

22mm

Features

Accepts Turbo and Nitrous; FSR series skirt

Fits for

Fiat Coupe Turbo 20V, Bravo HGT Turbo conversion (175A3, 182A1)

€849.00
Fiat / Lancia Integrale 2.0 16V Wiseco Pistons CR 8.5 84.5mm KE219M845

Product detailed specification

Bore size

84.50mm

Stroke

90.00mm

Wiseco compression ratio (CR)

8.5:1

OEM compression ratio (CR)

8.0:1

Dome volume (CC)

-10cm3

Compression height (CH)

38.94mm

Pin diameter

22mm

Features

Accepts Turbo and Nitrous; Full Round Skirt

Fits for

Lancia Delta HF Integrale / Fiat Coupe turbo 16V 
2.0 16V (HF Integrale 16V)

Wiseco ArmorGlide skirt coating is a dry film lubricant applied to the piston skirt. This coating helps reduce friction, improving performance, and will also help quiet the piston in the cylinder bore. This coating is permanently applied, and is not a break in coating, it is on the piston for the life of the part.
€699.00
Fiat 2.0 20V Turbo 175 A3.000 145mm
Fiat 2.0 20V Turbo 175 A3.000 FCP H-beam steel connecting rods 145mm
Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHF14551322
Profile: H-beam
C to C: 145mm
Big end diameter: 51.30mm
Pin diameter: 22mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 700HP (5 cylinder)
Advertised RPM rating: 9000RPM
Fiat - 2.0 20V Turbo (175 A3.000)
€489.00
Fiat / Lancia Integrale 2.0 16V Wiseco Pistons CR 8.5 85mm KE219M85

Product detailed specification

Bore size

85.00mm

Stroke

90.00mm

Wiseco compression ratio (CR)

8.5:1

OEM compression ratio (CR)

8.0:1

Dome volume (CC)

-10cm3

Compression height (CH)

38.94mm

Pin diameter

22mm

Features

Accepts Turbo and Nitrous; Full Round Skirt

Fits for

Lancia Delta HF Integrale / Fiat Coupe turbo 16V 
2.0 16V (HF Integrale 16V)

Wiseco ArmorGlide skirt coating is a dry film lubricant applied to the piston skirt. This coating helps reduce friction, improving performance, and will also help quiet the piston in the cylinder bore. This coating is permanently applied, and is not a break in coating, it is on the piston for the life of the part.
€699.00
Fiat / Lancia Integrale 2.0 16V Wiseco Pistons CR 8.5 85.5mm KE219M855

Product detailed specification

Bore size

85.50mm

Stroke

90.00mm

Wiseco compression ratio (CR)

8.5:1

OEM compression ratio (CR)

8.0:1

Dome volume (CC)

-10cm3

Compression height (CH)

38.94mm

Pin diameter

22mm

Features

Accepts Turbo and Nitrous; Full Round Skirt

Fits for

Lancia Delta HF Integrale / Fiat Coupe turbo 16V 
2.0 16V (HF Integrale 16V)

Wiseco ArmorGlide skirt coating is a dry film lubricant applied to the piston skirt. This coating helps reduce friction, improving performance, and will also help quiet the piston in the cylinder bore. This coating is permanently applied, and is not a break in coating, it is on the piston for the life of the part.
€699.00
Lancia Delta 2.0 8V-16V Turbo FCP H-beam steel connecting rods 145mm
Lancia Delta, Fiat Coupe 2.0 16V Turbo FCP H-beam steel connecting rods 145mm
Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHL1455422
Profile: H-beam
C to C: 145mm
Big end diameter: 53.91mm
Pin diameter: 22mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 600HP (4 cylinder)
Advertised RPM rating: 9000RPM
Lancia Delta - 2.0 8V, 2.0 16V Turbo (835, 836)
Fiat Coupe - 2.0 16V Turbo (175 A1.000)
€399.00
Lancia Delta Integrale 2.0 HF ACL Race Series connecting rod bearings 4B2904H
ENGINE BEARINGS
rods.jpg

CON ROD BEARING SET

MAIN BEARING SET

Part# Part#
4B2904H

4B2904HX

 
5M2908H

 
5M2908HX

 
Sizes STD, .025, .25 STD STD, .025, .25 STD
Oil Clearance Standard + 0.001" Extra Standard + 0.001" Extra
Half Type Identical Halves Upper & Lower
Material

Tri-metal Hardened steel backs

Tri-Metal
Min Std Shaft Size

1.9995in / 50.787 mm

2.0862 in / 52.991 mm

Max Std Shaft Size

2.0003in / 50.807 mm

2.0866 in / 53.000 mm

Min Std Tunnel Size

2.1219 in / 53.897 mm

2.2330 in / 56.717 mm

Max Std Tunnel Size

2.1226 in / 53.913 mm

2.2337 in / 56.735 mm

Max Wall at Crown

0.0605in / 1.536 mm

0.0600in / 1.523 mm

0.0726 in / 1.843 mm

0.0720 in / 1.830 mm

Max Overall Length

0.768 in / 19.50 mm

0.817 in / 20.75 mm (2908H/HX)

0.955 in / 24.25 mm (2909H/HX)

Notes - -

Diagram       
(Top View) 

2904H_000.jpg

2908H & HX - Positions 1,2,4,5

2908H_000.jpg

2909H & HX - Position 3

2909H_000.jpg

 THRUSTWASHER SET
Part# Material
Sizes Notes -
€89.00