Click here to open old website version
All categories
Parts by Car
Go
Parts by Car
Go
Parts by:
Category

Wastegates

Turbosmart Comp-Gate 40 External Wastegate Blue
Turbosmart Comp-Gate 40 external wastegate 14psi Blue TS-0505-1009
Stay in total control of your turbo with the Turbosmart Comp-Gate 40 External Wastegate Actuator (14PSI model).
This 40mm wastegate is a full 25% smaller than the previous models to fit even the tightest engine compartments.
Turbosmart’s ingenious locking collar makes it easy to swap out your Comp-Gate’s springs to match your desired boost (springs sold separately).
Set the locking collar in any one of 12 indexed positions for easy adjustments.
Built for optimal flow, enhanced thermal resistance and race-ready durability.
Pairs with factory and aftermarket turbos—bolts right up to 1.75” outside diameter pipes.
Available in finishes that add race-inspired style to your ride's engine compartment.
Comes complete with a valve seat, gaskets, nuts, bolts, vacuum fittings, two 1/16 NPT blanking plugs, two 1/16 vacuum nipples and a collar removal tool.
€385.00
Turbosmart Comp-Gate 40 External Wastegate Black
Turbosmart Comp-Gate 40 external wastegate 14psi Black TS-0505-1010
Stay in total control of your turbo with the Turbosmart Comp-Gate 40 External Wastegate Actuator (14PSI model).
This 40mm wastegate is a full 25% smaller than the previous models to fit even the tightest engine compartments.
Turbosmart’s ingenious locking collar makes it easy to swap out your Comp-Gate’s springs to match your desired boost (springs sold separately).
Set the locking collar in any one of 12 indexed positions for easy adjustments.
Built for optimal flow, enhanced thermal resistance and race-ready durability.
Pairs with factory and aftermarket turbos—bolts right up to 1.75” outside diameter pipes.
Available in finishes that add race-inspired style to your ride's engine compartment.
Comes complete with a valve seat, gaskets, nuts, bolts, vacuum fittings, two 1/16 NPT blanking plugs, two 1/16 vacuum nipples and a collar removal tool.
€385.00
Turbosmart GenV Compgate 40 external wastegate 14psi Blue TS-0552-1011
Modular 
The 5th series wastegate range has been designed for maximum user-adjustability, without compromising performance. We designed our new unit to allow actuators to be interchangeable across the range. So, if you need a large wastegate in a tight space you can run a smaller actuator on the larger body. Additionally, if you decide to upgrade your new wastegate to a Motorsport or compressed gas-only actuator you can with an upgrade kit.
Adjustability 
The unique variable adjustment design allows the wastegate actuator base to be oriented independently from the weld flanges. The cap is also completely independent and indexable in 12 different positions compared to the actuator base and body. This allows the wastegate to be fitted in confined positions without compromising packaging for fittings or aligning the cap. 
Upgrades and Servicing 
Due to the modular construction, the new range is also upgradeable and completely serviceable, as all components can be removed or upgraded. Components have been tested for over one million cycles so reliability will be rock-solid. 
Flow and Thermal Performance  
Our new range of wastegates out-flow all competitors thanks to our world-leading engineering and simulation abilities. Thermal performance has been improved drastically compared to our nearest rival, and all wastegates feature liquid cooling ports for further thermal performance if required 
Control 
For fine-tuning, boost performance, a selection of springs will be supplied with each wastegate. All wastegates feature 1/8″ NPT ports for maximum response and flow while maintaining a high level of compatibility for fittings.

Product features summary: 

  • Modular interchangeable actuators 
  • Independently orientated actuator base
  • New strap type V band clamps 
  • Increased thermal and flow performance, and; 
  • A diaphragm design that offers linear travel; regardless of spring, pressure and valve positioning, while improving response. 
  • Integrated water cooling ports (if required) 
Included in box: 
  • Turbosmart Gen V Wastegate 
  • Valve seat 
  • Inlet V-band clamp 
  • Inlet weld flange 
  • Outlet V-band clamp 
  • Outlet weld flange 
  • Collar tool 
  • Spring kit 
  • Fitting kit
€385.00
Turbosmart GenV Compgate 40 external wastegate 14psi Black TS-0552-1012
Modular 
The 5th series wastegate range has been designed for maximum user-adjustability, without compromising performance. We designed our new unit to allow actuators to be interchangeable across the range. So, if you need a large wastegate in a tight space you can run a smaller actuator on the larger body. Additionally, if you decide to upgrade your new wastegate to a Motorsport or compressed gas-only actuator you can with an upgrade kit.
Adjustability 
The unique variable adjustment design allows the wastegate actuator base to be oriented independently from the weld flanges. The cap is also completely independent and indexable in 12 different positions compared to the actuator base and body. This allows the wastegate to be fitted in confined positions without compromising packaging for fittings or aligning the cap. 
Upgrades and Servicing 
Due to the modular construction, the new range is also upgradeable and completely serviceable, as all components can be removed or upgraded. Components have been tested for over one million cycles so reliability will be rock-solid. 
Flow and Thermal Performance  
Our new range of wastegates out-flow all competitors thanks to our world-leading engineering and simulation abilities. Thermal performance has been improved drastically compared to our nearest rival, and all wastegates feature liquid cooling ports for further thermal performance if required 
Control 
For fine-tuning, boost performance, a selection of springs will be supplied with each wastegate. All wastegates feature 1/8″ NPT ports for maximum response and flow while maintaining a high level of compatibility for fittings.

Product features summary: 

  • Modular interchangeable actuators 
  • Independently orientated actuator base
  • New strap type V band clamps 
  • Increased thermal and flow performance, and; 
  • A diaphragm design that offers linear travel; regardless of spring, pressure and valve positioning, while improving response. 
  • Integrated water cooling ports (if required) 
Included in box: 
  • Turbosmart Gen V Wastegate 
  • Valve seat 
  • Inlet V-band clamp 
  • Inlet weld flange 
  • Outlet V-band clamp 
  • Outlet weld flange 
  • Collar tool 
  • Spring kit 
  • Fitting kit
€385.00
Turbosmart Hypergate 45 external wastegate Blue TS-0506-1040

Turbosmart Hypergate 45 External Wastegate data:

  • 14psi
  • 45mm external wastegate
  • Includes:
    • Inlet and outlet weld flanges
    • Inlet and outlet v-band clamps
    • Valve seat
    • 2 - 1/16 vacuum fittings
    • 2 - 1/16 NPT blanks
    • Collar removal tool
    • Hardware

Suitable for medium-large capacity engines with medium frame turbochargers systems. Street and racing applications. Suits 1 7/8” outside diameter tubing. Fits all popular 44mm flanges. - See more at: http://www.turbosmartdirect.com/Product-Categories/45mm-HyperGate/WG45-Hypergate-45-14psi-Blue.html#sthash.k5vmeGxr.dpuf
€419.00
Turbosmart Hypergate 45 external wastegate Black TS-0506-1041

Turbosmart Hypergate 45 External Wastegate data:

  • 14psi
  • 45mm external wastegate
  • Includes:
    • Inlet and outlet weld flanges
    • Inlet and outlet v-band clamps
    • Valve seat
    • 2 - 1/16 vacuum fittings
    • 2 - 1/16 NPT blanks
    • Collar removal tool
    • Hardware
€419.00
Turbosmart GenV Compgate 45 external wastegate 14psi Blue TS-0553-1011
Modular 
The 5th series wastegate range has been designed for maximum user-adjustability, without compromising performance. We designed our new unit to allow actuators to be interchangeable across the range. So, if you need a large wastegate in a tight space you can run a smaller actuator on the larger body. Additionally, if you decide to upgrade your new wastegate to a Motorsport or compressed gas-only actuator you can with an upgrade kit.
Adjustability 
The unique variable adjustment design allows the wastegate actuator base to be oriented independently from the weld flanges. The cap is also completely independent and indexable in 12 different positions compared to the actuator base and body. This allows the wastegate to be fitted in confined positions without compromising packaging for fittings or aligning the cap. 
Upgrades and Servicing 
Due to the modular construction, the new range is also upgradeable and completely serviceable, as all components can be removed or upgraded. Components have been tested for over one million cycles so reliability will be rock-solid. 
Flow and Thermal Performance  
Our new range of wastegates out-flow all competitors thanks to our world-leading engineering and simulation abilities. Thermal performance has been improved drastically compared to our nearest rival, and all wastegates feature liquid cooling ports for further thermal performance if required 
Control 
For fine-tuning, boost performance, a selection of springs will be supplied with each wastegate. All wastegates feature 1/8″ NPT ports for maximum response and flow while maintaining a high level of compatibility for fittings.

Product features summary: 

  • Modular interchangeable actuators 
  • Independently orientated actuator base
  • New strap type V band clamps 
  • Increased thermal and flow performance, and; 
  • A diaphragm design that offers linear travel; regardless of spring, pressure and valve positioning, while improving response. 
  • Integrated water cooling ports (if required) 
Included in box: 
  • Turbosmart Gen V Wastegate 
  • Valve seat 
  • Inlet V-band clamp 
  • Inlet weld flange 
  • Outlet V-band clamp 
  • Outlet weld flange 
  • Collar tool 
  • Spring kit 
  • Fitting kit
€419.00
Turbosmart GenV Compgate 45 external wastegate 14psi Black TS-0553-1012
Modular 
The 5th series wastegate range has been designed for maximum user-adjustability, without compromising performance. We designed our new unit to allow actuators to be interchangeable across the range. So, if you need a large wastegate in a tight space you can run a smaller actuator on the larger body. Additionally, if you decide to upgrade your new wastegate to a Motorsport or compressed gas-only actuator you can with an upgrade kit.
Adjustability 
The unique variable adjustment design allows the wastegate actuator base to be oriented independently from the weld flanges. The cap is also completely independent and indexable in 12 different positions compared to the actuator base and body. This allows the wastegate to be fitted in confined positions without compromising packaging for fittings or aligning the cap. 
Upgrades and Servicing 
Due to the modular construction, the new range is also upgradeable and completely serviceable, as all components can be removed or upgraded. Components have been tested for over one million cycles so reliability will be rock-solid. 
Flow and Thermal Performance  
Our new range of wastegates out-flow all competitors thanks to our world-leading engineering and simulation abilities. Thermal performance has been improved drastically compared to our nearest rival, and all wastegates feature liquid cooling ports for further thermal performance if required 
Control 
For fine-tuning, boost performance, a selection of springs will be supplied with each wastegate. All wastegates feature 1/8″ NPT ports for maximum response and flow while maintaining a high level of compatibility for fittings.

Product features summary: 

  • Modular interchangeable actuators 
  • Independently orientated actuator base
  • New strap type V band clamps 
  • Increased thermal and flow performance, and; 
  • A diaphragm design that offers linear travel; regardless of spring, pressure and valve positioning, while improving response. 
  • Integrated water cooling ports (if required) 
Included in box: 
  • Turbosmart Gen V Wastegate 
  • Valve seat 
  • Inlet V-band clamp 
  • Inlet weld flange 
  • Outlet V-band clamp 
  • Outlet weld flange 
  • Collar tool 
  • Spring kit 
  • Fitting kit
€419.00
Turbosmart Gen-V WG50 Pro-Gate50 wastegate 14psi Blue TS-0554-1011

The Gen-V WG50 Pro-Gate50 external wastegate is a cost effective, high performing 50mm external wastegate. 

The Gen-V provides extensive user configurability, world leading extended thermal performance, fatigue resistance and best in class flow performance for optimum control and longevity. 

A direct fit upgrade to all 4th-generation Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, liquid-cooling, 1/8″ NPT ports, and are provided with a range of springs. 

Available in Compressed Gas configuration. 

Product features summary
• Liquid cooling provision 
• Strap type V-band clamps 
• User adjustable actuator position 
• Modular actuator design 
• Compressed Gas configurations available.

€549.00
Turbosmart Gen-V WG50 Pro-Gate50 wastegate 14psi Black TS-0554-1012

The Gen-V WG50 Pro-Gate50 external wastegate is a cost effective, high performing 50mm external wastegate. 

The Gen-V provides extensive user configurability, world leading extended thermal performance, fatigue resistance and best in class flow performance for optimum control and longevity. 

A direct fit upgrade to all 4th-generation Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, liquid-cooling, 1/8″ NPT ports, and are provided with a range of springs. 

Available in Compressed Gas configuration. 

Product features summary
• Liquid cooling provision 
• Strap type V-band clamps 
• User adjustable actuator position 
• Modular actuator design 
• Compressed Gas configurations available.

€549.00
Turbosmart Gen-V WG60 Power-Gate 60 14psi Blue TS-0555-1011
The Gen-V WG60 Power-Gate60 external wastegate is a cost effective, high performing 60mm external wastegate, the largest in the Gen-V range. 

The Gen-V provides extensive user configurability, world leading extended thermal performance, fatigue resistance and best in class flow performance for optimum control and longevity. 

A direct fit upgrade to all 4th-generation Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, liquid-cooling, 1/8″ NPT ports, and are provided with a range of springs. 

Available in Compressed Gas configuration.

Product features summary: 
• Class leading thermal performance 
• Class leading flow performance 
• Liquid cooling provision 
• Strap type V-band clamps 
• User adjustable actuator position 
• Modular actuator design 
• Compressed Gas configuration available 

Included in the Box: 
• Wastegate unit (pre-assembled with spring as per order) 
• SS316 Valve seat 
• Inlet V-Band 
• Inlet SS304 weld flange 
• Outlet V-Band 
• Outlet SS304 weld flange 
• Collar tool (master/slave) 
• 17/7 PH 3, 5, 7, 14 psi spring kit (1x spring installed) 
• 4x 1/8” NPT plugs (1x installed) / 2x 1/8” NPT nipples 
• Sticker 
• Instruction card

Beryllium (Be) 0%
Main Body High temp 347 SS
Diaphragm Proprietary Silicone w/ nomex
Actuator Housing 6061 T6 anodised Al.
Valve Guide Nitronic 60
Valve EV8 w/ proprietary plating
V-Band Heat treated 431 SS w/ 18-8 nut
Weld Flanges 304 Stainless Steel
Springs 17-7PH Stainless Steel
€725.00
Turbosmart Gen-V WG60 Power-Gate 60 14psi Black TS-0555-1012
The Gen-V WG60 Power-Gate60 external wastegate is a cost effective, high performing 60mm external wastegate, the largest in the Gen-V range. 

The Gen-V provides extensive user configurability, world leading extended thermal performance, fatigue resistance and best in class flow performance for optimum control and longevity. 

A direct fit upgrade to all 4th-generation Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, liquid-cooling, 1/8″ NPT ports, and are provided with a range of springs. 

Available in Compressed Gas configuration.

Product features summary: 
• Class leading thermal performance 
• Class leading flow performance 
• Liquid cooling provision 
• Strap type V-band clamps 
• User adjustable actuator position 
• Modular actuator design 
• Compressed Gas configuration available 

Included in the Box: 
• Wastegate unit (pre-assembled with spring as per order) 
• SS316 Valve seat 
• Inlet V-Band 
• Inlet SS304 weld flange 
• Outlet V-Band 
• Outlet SS304 weld flange 
• Collar tool (master/slave) 
• 17/7 PH 3, 5, 7, 14 psi spring kit (1x spring installed) 
• 4x 1/8” NPT plugs (1x installed) / 2x 1/8” NPT nipples 
• Sticker 
• Instruction card

Beryllium (Be) 0%
Main Body High temp 347 SS
Diaphragm Proprietary Silicone w/ nomex
Actuator Housing 6061 T6 anodised Al.
Valve Guide Nitronic 60
Valve EV8 w/ proprietary plating
V-Band Heat treated 431 SS w/ 18-8 nut
Weld Flanges 304 Stainless Steel
Springs 17-7PH Stainless Steel
€725.00
1 2