Top Sellers

Audi 2.2T 2.3 20V 3B AAN 7A King Racing connecting rod bearings CR505XP-0.25

XP	XP

C4104-PR	C4104-PR

Quantity

5

Crankshaft

47.777 / 47.757

Housing

50.599 / 50.620

Max Wall

1.402

Max Length

18.971

Engines Audi 5 cylinder engines
2.2T, 2.3 20V (3B, AAN, ADU, ABY, 7A)

€99.00

Audi/VW CR4104XP 1.6 1.8 2.0 connecting rod bearings

Audi 2.2T 2.3 20V 3B AAN 7A King Racing connecting rod bearings CR505XP-STD

XP	XP

C4104-PR	C4104-PR

Quantity

5

Crankshaft

47.777 / 47.757

Housing

50.599 / 50.620

Max Wall

1.402

Max Length

18.971

Engines Audi 5 cylinder engines
2.2T, 2.3 20V (3B, AAN, ADU, ABY, 7A)

€99.00

Audi 2.2T 20V 3B ABY ABU AAN Victor Reinz crankcase gasket set 08-29178-01

Set includes:
1 crankcase gasket
1 crankshaft seal rear (without housing)
1 crankshaft seal front
1 oil pump gasket
1 oil filter housing gasket
1 coolant pump gasket
1 thermostat gasket
and etc.
Fits for:
Audi 200, S2, RS2, S4, S6 - 2.2T 20V (3B, ABY, ABU, AAN)

€99.00

Audi 2.2T 20V AAN 3B Athena Cooper Ring cylinder head gasket 82x1.6mm 330048R

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number 330048R
Gasket thickness: 1.60mm
Bore size: 82.00mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€275.00

Audi 2.3 20V, S2 RS2 2.2 20V FCP racing solid lifters (cam followers)

Lifter data:
Outer diameter - 34.97mm
Inner diameter - 33.10mm
Outer height - 26.30mm
Stem length - 14.70mm
Stud diameter - 7.00mm
Weight - 50g
20 pcs. FCP Engineering racing mechanical solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed follower height to camshaft must be adjusted with lash caps (not included).

€449.00

Audi 2.5T 20V Stroker (stroke 95.5) JE Pistons 81.5mm CR 8.5

Product detailed specification
Bore size	81.50mm
Stroke	95.50mm
JE Pistons compression ratio (CR)	8.5:1
OEM compression ratio (CR)	9.3:1
Dome volume (CC)	-11.90cm³
Compression height (CH)	29.24mm
Pin diameter	22mm
Features	Tuff coated piston skirt, HD Pins
Fits for	5 cylinder Audi - 2.5T 20V Stroker

€1,499.00

Audi 2.5T 20V Stroker (stroke 95.5) JE Pistons 82mm CR 8.5

Product detailed specification
Bore size	82.00mm
Stroke	95.50mm
JE Pistons compression ratio (CR)	8.5:1
OEM compression ratio (CR)	9.3:1
Dome volume (CC)	-11.90cm³
Compression height (CH)	29.24mm
Pin diameter	22mm
Features	Tuff coated piston skirt, HD Pins
Fits for	5 cylinder Audi - 2.5T 20V Stroker

€1,499.00

Audi 2.7 A6 S4 RS4 Wossner pistons kit 82mm CR 8.5 K9091D100

Product detailed specification
Bore size	82.00mm
Stroke	86.40mm
Wossner compression ratio (CR)	8.5:1
OEM compression ratio (CR)	9.3:1
Dome volume (CC)	-9.60cm³
Compression height (CH)	30.70mm
Pin diameter	21mm
Fits for	Audi S4, RS4, A6 - 2.7T 30V (AGB, ASJ, AZB, AZR, AZF)

€1,349.00

Audi 2.7 S4 RS4 Wossner pistons kit 81.50mm CR 8.0 K9215D050

Product detailed specification
Bore size	81.50mm
Stroke	86.40mm
Wossner compression ratio (CR)	8.0:1
OEM compression ratio (CR)	9.0:1
Dome volume (CC)	-15.00cm³
Compression height (CH)	30.70mm
Pin diameter	21mm
Fits for	Audi 2.7T 30V (AZR, ASJ, AZF)

€1,349.00

Audi 2.7 Turbo A6 S4 RS4 Wossner pistons 81.50mm CR 8.5 K9091D050

Product detailed specification
Bore size	81.50mm
Stroke	86.40mm
Wossner compression ratio (CR)	8.50:1
OEM compression ratio (CR)	9.30:1
Dome volume (CC)	-9.60cm³
Compression height (CH)	30.70mm
Pin diameter	21mm
Fits for	Audi S4, RS4, A6 - 2.7 30V Turbo (AGB, ASJ, AZB, AZR, AZF)

€1,349.00

Audi 2.9L RS4 B9 EA839 Twin-Turbo ZRP Connecting Rods R-AUD-013-I

Engine Nr	Audi RS4 / RS5 2.9L Twin-Turbo Quattro EA839
Application	2.9L RS4 / RS5 EA839 Twin-Turbo
Bolt Size	5/16"
Shape	I-Beam
Length (CC)	155.00
Pin Size	22.00
Big Bore	58.80
B.E Width	20.05
Weight Gr.	525
Set of	6
Fastener Grade	ARP2000
Series	Heavy Duty
Weight	525

€1,049.00

Audi 200 / UR Quattro 2.2 10V Turbo Wossner piston kit 80.50mm CR 7.0:1...

Product detailed specification
Bore size	80.50mm
Stroke	86.40mm
Wossner compression ratio (CR)	7.00:1
OEM compression ratio (CR)	7.00:1
Dome volume (CC)	-33.4
Compression height (CH)	40.60mm
Pin diameter	22mm
Fits for	Audi 2.1 /2.2 20V Turbo (WR / KG / JY)

€1,099.00

Audi 200 / UR Quattro 2.2 10V Turbo Wossner piston kit 80mm CR 7.0:1 K1560DA

Product detailed specification
Bore size	80.00mm
Stroke	86.40mm
Wossner compression ratio (CR)	7.00:1
OEM compression ratio (CR)	7.00:1
Dome volume (CC)	NA
Compression height (CH)	40.60mm
Pin diameter	22mm
Fits for	Audi 2.1 /2.2 20V Turbo (WR / KG / JY)

€1,099.00

Audi 2.2 20V S2 S4 RS2 200 Quattro 20V racing valve spring kit

Audi 200 S2 RS2 S4 S6 2.2 20V FCP valve spring kit

Valve springs data
Installed seat pressure - 38kg

Load - 100kg@12.5mm

Max. lift - up to 13mm

Made from chrome-silicon steel SAE9254-V
Outer spring outer diameter: 30.50mm
Outer spring inner diameter: 23.20mm
Inner spring outer diameter: 21.20mm
Inner spring inner diameter: 16.20mm

20 pcs. outer springs

20 pcs. inner springs

Fits all 5 cylinder 20V Audi engines 3B, AAN, ABY, ADU, RR, 7A.

With this set the risk of valve flutter and a possible engine failure is minimized. Recommended for engines with series and racing camshafts and over 7500 RPM.

Can also be used together with standard or FCP titanium retainers.

€300.00

Audi 200 S2 RS2 S4 S6 2.2T 20V 3B AAN JE Pistons kit CR 8.5 81mm 302228

Product detailed specification
Bore size	81.00mm
Stroke	86.40mm
JE Pistons compression ratio (CR)	8.5:1
OEM compression ratio (CR)	9.3:1
Dome volume (CC)	-7.60cm³
Compression height (CH)	32.80mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous; FSR series skirt
Fits for	Audi - 2.2 20V Turbo (3B, ABY, ADU, AAN)

€1,099.00

Audi 2.2 20V turbo S2 / RS2 FCP forged piston kit

Audi 200 S2 RS2 S4 S6 2.2T 20V FCP forged piston kit 82mm CR 8.5

Part number: FCPPA820085/5
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 82.00mm
Compression ratio (CR): 8.5:1
Compression height: 33.00 mm
Pin diameter: 20mm
Stroke: 86.40mm
Audi 200, S2, RS2, S4, S6 - 2.2 2.5 20V Turbo

€989.00

Audi 200 S2 RS2 S4 S6 2.2T 20V FCP forged pistons 81.50mm CR 8.5

Part number: FCPPA815085/5
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 81.50mm
Compression ratio (CR): 8.5:1
Compression height: 33.00 mm
Pin diameter: 20mm
Stroke: 86.40mm
Audi 200, S2, RS2, S4, S6 - 2.2 2.5 20V Turbo

€989.00

Audi 200 S2 RS2 S4 S6 2.2T 20V FCP forged pistons kit 81.00mm CR 8.5

Audi 200 S2 RS2 S4 S6 2.2T 20V FCP forged pistons 81mm CR 8.5

Part number: FCPPA810085/5
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 81.00mm
Compression ratio (CR): 8.5:1
Compression height: 33.00 mm
Pin diameter: 20mm
Stroke: 86.40mm
Audi 200, S2, RS2, S4, S6 - 2.2 2.5 20V Turbo

€989.00

Audi 200 S2 RS2 S4 S6 2.2T 20V FCP forged pistons 83mm CR 8.5

Part number: FCPPA830085/5
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 83mm
Compression ratio (CR): 8.5:1
Compression height: 33.00 mm
Pin diameter: 20mm
Stroke: 86.40mm
Audi 200, S2, RS2, S4, S6 - 2.2 2.5 20V Turbo

€989.00

Audi 200 S2 RS2 S4 S6 2.2T 20V FCP forged pistons kit 82.50mm CR 8.5

Part number: FCPPA825085/5
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 82.50mm
Compression ratio (CR): 8.5:1
Compression height: 33.00 mm
Pin diameter: 20mm
Stroke: 86.40mm
Audi 200, S2, RS2, S4, S6 - 2.2 2.5 20V Turbo

€989.00

Audi 200 S2 RS2 S4 S6 2.5 2.6 20V stroker FCP H-beam con rods 155mm

Audi 200 S2 RS2 S4 S6 2.5 2.6 20V Stroker FCP H-beam steel connecting rods 155mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHA15550620-5
Profile: H-beam
C to C: 155mm
Big end diameter: 50.6mm
Pin diameter: 20mm
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 800HP (5 cylinder)
Advertised RPM rating: 9000RPM
Audi Quattro, 200, S2, RS2, S4, S6 - 2.5 2.6 20V Stroker

Engine setup: 2.5tdi 236mm block with 95.5 crankshaft and standard 2.2 20V Pistons

€539.00

Audi 200 S2 RS2 S4 S6 2.5 2.6 20V Stroker FCP X-beam connecting rods 155mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRXA15550620
Profile: X-beam (Oiling channel from big end to piston pin)
C to C: 155mm
Big end diameter: 50.6mm
Pin diameter: 20mm
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1000+HP (5 cylinder)
Advertised RPM rating: 9000RPM
Audi 200, Quattro, S2, RS2, S4, S6 - 2.2T 20V (3B, ABY, AAN, ADU)

Engine setup: 2.5tdi 236mm block with 95.5 crankshaft and standard 2.2 20V Pistons

€719.00

Audi 200 S2 RS2 S4 S6 2.5 2.6 20V Stroker FCP X-beam connecting rods 159mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRXA15950622
Profile: X-beam (Oiling channel from big end to piston pin)
C to C: 159mm
Big end diameter: 50.6mm
Pin diameter: 22mm
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1000+HP (5 cylinder)
Advertised RPM rating: 9000RPM
Audi Quattro 200 S2 RS2 S4 S6 - 2.5 2.6 20V Stroker

Engine setup: 2.5 TDi 236mm block with 95.5 crankshaft and 2.2T 20V stroker pistons

€719.00

Audi 200 S2 S4 RS2 2.2 20V Stroker FCP H-beam steel connecting rods 164mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHA16450622-5
Profile: H-beam
C to C: 164mm
Big end diameter: 50.6mm
Pin diameter: 22mm
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 800HP (5 cylinder)
Advertised RPM rating: 9000RPM
Audi Quattro, 200, S2, RS2, S4, S6 - 2.2 20V

Engine setup: 2.5tdi 236mm block with 86.4 (OEM) crankshaft and 2.2 20V stroker pistons

€539.00

Best sellers