Top Sellers

VAG 1.8T 20V Victor Reinz M10 cylinder head bolt kit 14-32124-01

Part number 14-32124-01
Victor Reinz cylinder head bolt kit (M10)
Audi / Seat / Skoda / VW - 1.8T 20V

€35.00

VAG 2.8 2.9 3.2 3.6 VR6 R32 R36 ACL thrust washers kit 2T5532

Part number 2T5532-STD
ACL thrust washers kit
VAG - 2.8 2.9 3.2 3.6 VR6 R32 R36

€19.00

VAG Longitudinally mounted 1.8T 20V Turbocharger K04-015

Cold side technical features:
Inducer: 38mm
Exducer: 51mm

Hot side technical features:
Inducer: 50mm
Exducer: 42mm

Kit includes turbocharger, gaskets, installation notice.

€329.00

VAG Transversely mounted 1.8T 20V Turbocharger K04-023

Cold side technical features:
Inducer: 42mm
Exducer: 56mm

Hot side technical features:
Inducer: 55mm
Exducer: 42mm

Kit includes turbocharger, gaskets, installation notice.

€329.00

VAG transversely mounted G60, 1.8T, 1.9TDI, 2.0 16V steel flywheel 228mm

Direct replacement Single-mass flywheel made from Alloy steel (16MnCr5)
Used with aftermarket 228mm clutch kit.
Weight - 4.9kg.
Can be used with Sachs performance clutch cover - 883082999645
Clutch disc options:
Organic Sachs Performance (450+ Nm) - 881861999793
4pad ceramic Sachs Performance (520+ Nm) - 881861999750

€299.00

Volvo 2.0 2.3 ACL Race connecting rod bearings kit 4B2726H-STD

ENGINE BEARINGS
	CON ROD BEARING SET
	Part#
	4B2726H
Sizes	STD
Oil Clearance	Standard
Half Type	Identical Halves
Material	Tri-metal Hardened steel backs
Min Std Shaft Size	1.9285in / 48.984mm
Max Std Shaft Size	1.9293in / 49.004mm
Min Std Tunnel Size	2.0472in / 51.999mm
Max Std Tunnel Size	2.0478in / 52.014mm
Max Wall at Crown	0.0585in / 1.486mm
Max Overall Length	0.945in / 24.00mm
Notes
Diagram (Top View)

Engines Volvo - 2.0 2.3 (B200, B204, B230, B234)

€119.00

Volvo 5 cyl. 2.5 B5254 '00- ARP main stud kit 219-5801

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€514.00

Volvo 850 T5 C70 V70 2.3 20V 5pcs. 139.50mm

Volvo 850 T5 C70 V70 2.3 20V FCP H-beam steel connecting rods 139.5mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHV13955323
Profile: H-beam
C to C: 139.50mm
Big end diameter: 53mm
Pin diameter: 23mm
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 700HP (5 cylinder)
Advertised RPM rating: 9000RPM
Volvo 850, C70, V70 - 2.3 20V

€539.00

Volvo B23 B230A B243F MLS cylinder head gasket 97x1.3mm C4499-051

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€129.00

Volvo B230F B234F ACL Duraglide main bearings 5M2727-STD

€89.00

VW / Audi 1.6 1.8 2.0 16V FCP racing solid lifters (tappets, cam followers)

Lifter info:
Outer diameter - 34.97mm
Inner diameter - 33.10mm
Outer height - 26.30mm
Stem length - 14.70mm
Stud diameter - 7.00mm
Weight - 50g
16 pcs. FCP Engineering racing mechanical solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed follower height to camshaft must be adjusted with lash caps (not included).

€365.00

VW / Audi 1.6 1.8 2.0 8V FCP racing solid lifters (followers, tappets)

Lifter info:
Outer diameter - 34.97mm
Inner diameter - 33.10mm
Outer height - 26.30mm
Stem length - 14.70mm
Stud diameter - 7.00mm
Weight - 50g
8 pcs. FCP Engineering mechanical racing solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed follower height to camshaft must be adjusted with lash caps (not included).

€185.00

VW / Audi 1.8 2.0 16V KR PL 9A ABF FCP valve double springs kit

VW / Audi 1.8 2.0 16V KR PL 9A ABF ACE FCP valve spring set

Valve springs data
Installed seat pressure - 38kg
Load - 100kg@12.5mm
Max. lift - up to 13mm
Made from chrome silicone steel SAE9254-V
Outer spring outer diameter: 30.50mm
Outer spring inner diameter: 23.20mm
Inner spring outer diameter: 21.20mm
Inner spring inner diameter: 16.20mm
16 pcs. outer springs
16 pcs. inner springs
Fits all 4 cylinder 1.8 2.0 16V VW / Audi engines KR, PL, 9A, ABF, ACE.
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7600 RPM.
Can also be used together with standard or FCP titanium retainers.

€199.00

VW/Audi 1.8 16V KR PL 2.0 16V 9A ACE racing valve spring kit + titanium retainers

VW / Audi 1.8 2.0 16V KR PL 9A FCP valve spring and retainer kit

Valve springs data
Installed seat pressure - 38kg
Load - 100kg@12.5mm
Max. lift - up to 13mm
Made from chrome silicone steel SAE9254-V
Outer spring outer diameter: 30.50mm
Outer spring inner diameter: 23.20mm
Inner spring outer diameter: 21.20mm
Inner spring inner diameter: 16.20mm
16 pcs. outer springs
16 pcs. inner springs
16 pcs. titanium retainers
Fits all 4 cylinder 1.8 2.0 16V VW / Audi engines KR, PL, 9A.
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7600 RPM.
Titanium retainers are very strong and light, they help to eliminate valve float. Weight is only 10g.

€399.00

VW / Audi 1.8 2.0 16V KR PL ABF M11 ARP cylinder head stud kit 204-4204

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€223.00

VW / Audi 1.8 2.0 16V, 2.2T 20V, 2.8 2.9 12V VR6 ARP flywheel bolt 1 pc.

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€10.00

VW / Audi 1.8 2.0 8V ARP cylinder head stud kit 204-4203

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€212.00

VW / Audi 1.8 2.0 8V FCP valve spring set

Valve springs data
Installed seat pressure - 38kg

Load - 100kg@12.5mm
Max. lift - up to 13mm
Made from chrome silicone steel SAE9254-V
Outer spring outer diameter: 30.50mm
Outer spring inner diameter: 23.20mm
Inner spring outer diameter: 21.20mm
Inner spring inner diameter: 16.20mm
8 pcs. outer springs
8 pcs. inner springs
Fits all 4 cylinder 1.8-2.0 8V VW / Audi engines
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7600 RPM.
Can also be used together with standard or FCP titanium retainers.

€120.00

VW / Audi 1.8 20V, 2.0 16V, 2.2T 20V, 1.9 2.5 TDI ARP M10 main bolt

8740 Chrome Moly: Until the development of today’s modern alloys, chrome moly was popularly considered a high strength material. Now viewed as only moderate strength, 8740 chrome moly is seen as a good tough steel, with adequate fatigue properties for most racing applications, but only if the threads are rolled after heat-treatment, as is the standard ARP production practice. Typically, chrome moly is classified as a quench and temper steel, that can be heat-treated to deliver tensile strengths between 180,000 and 210,000 psi

€11.00

VW / Audi 1.8T 20V AEB ARP cylinder head stud kit M11 204-4101

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€369.00

VW 1.8 20V Turbo AVC ANB AWU AEB 81.50mm

VW / Audi 1.8T 20V AEB Wossner pistons kit 81.50mm CR 8.5 K9075D050

Product detailed specification
Bore size	81.50mm
Stroke	86.40mm
Wossner compression ratio (CR)	8.5:1
OEM compression ratio (CR)	9.5:1
Dome volume (CC)	-9.70cm³
Compression height (CH)	32.70mm
Pin diameter	20mm
Fits for	Audi 1.8T 20V (AEB, AGU and many others)

€749.00

VW / Audi 1.9 TDI (non PD) ARP cylinder head stud kit 204-4706

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€369.00

VW / Audi 1.9 TDI PD ARP cylinder head stud kit 204-1.9TDIPD

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€357.00

VW / Audi 2.0 16V FSI TFSI TSI ARP cylinder head stud kit 204-4302

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€279.00

Best sellers