There are no items in cart
Product detailed specification
Manufacturer: FCP Engineering
Model: FCPRHATSI14450621T
Profile: H-beam
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 21mm
Big end width: 21.90mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 600HP (4 cylinder)
Advertised RPM rating: 9000RPM
Audi / VW chain driven engines - 2.0 16V TSI (EA888)
|
Product detailed specification |
|
|
Bore size |
82.00mm |
|
Stroke |
86.40mm |
|
JE Pistons compression ratio (CR) |
9.0:1 |
|
OEM compression ratio (CR) |
9.3:1 |
|
Dome volume (CC) |
-4.50cm3 |
|
Compression height (CH) |
30.70mm |
|
Pin diameter |
21mm |
|
Features |
Accepts Turbo and Nitrous; Round skirt |
|
Fits for |
Audi S4, RS4, A6 - 2.7 30V |
Part number 61-29305-00
Victor Reinz cylinder head gasket set
For VAG engines:
Audi 80, 100, A6, Coupe - 2.0 16V (6A, AAE, AAD, ABK, ACE)
Seat Cordoba, Ibiza - 2.0 8V (2E, AGG), 2.0 16V (ABF)
VW Corrado, Golf, Passat, Sharan, Vento - 2.0 8V (2E, ABA, ADY, AEP, AKR, AGG, ATM), 2.0 16V (9A, ABF)
Part number 7M5532HX-STD (+0.001" extra clearance)
ACL Race Series main bearings
Audi / VW - 2.8 2.9 3.2 3.6 VR6 R32 R36 (BUB, BHK, AES, AUE, ABV, AAA, AMY)
| ENGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 4B1606H |
4B1606HX |
|
| Sizes | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.8802" /47.758mm |
|
| Max Std Shaft Size |
1.8810" /47.778mm |
|
| Min Std Tunnel Size |
1.9921" /50.600mm |
|
| Max Std Tunnel Size |
1.9929" /50.619mm |
|
| Max Wall at Crown |
0.0553" / 1.405mm |
0.0548" /1.392mm |
| Max Overall Length |
0.748" / 19.00mm |
|
| Notes | Bearing has 1.65mm oil hole at crown | |
|
Diagram |
 |
|
|
Product detailed specification |
|
|
Bore size |
81.00mm |
|
Stroke |
92.80mm |
|
JE Pistons compression ratio (CR) |
9.0:1 |
|
OEM compression ratio (CR) |
10.0:1 |
|
Dome volume (CC) |
-3.30cm3 |
|
Compression height (CH) |
30.70mm |
|
Pin diameter |
21mm |
|
Features |
Accepts Turbo and Nitrous; Round skirt |
|
Fits for |
Audi S4, RS4, A6 - 2.7 30V |
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
Product detailed specification
Manufacturer: FCP Engineering
Part number 7M5532H-0.25
ACL Race Series main bearings
Audi / VW - 2.8 2.9 3.2 3.6 VR6 R32 R36 (BUB, BHK, AES, AUE, ABV, AAA, AMY)
Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338254R
Gasket thickness: 1.25mm
Bore size: 83.80mm
|
Part number starting with 338 |
|
|
Athena advantages |
|
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
|
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
|
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
Crankshaft gear info:
• This reinforced crankshaft gear has been manufactured specifically for uprated turbo engines, where the original crankshaft gear not withstand the loads
• OEM part number: 034105263A
• Material: 42CrMo4
