Audi / VW

Cometic VW / AUDI VR6 3.2 24V 2004-09 MLS cylinder head gasket 85x1.3mm...

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€155.00

Audi / Seat / Skoda / VW 1.8T 20V Supertech valve spring set SPRK-AUDI1.8T

Spring data:
Seat pressure: intake - 60lbs @ 36.60mm, exhaust - 80lbs @ 33.20mm
Spring coil bind: intake - 23.00mm, exhaust - 19.50mm
Max lift: intake - 13.60mm, exhaust - 13.70mm
Rate: intake - 6.70lbs/mm, exhaust - 10.00lbs/mm
Intake single spring:
Outer diameter - 20.60mm
Inner diameter - 14.40mm
Exhaust double spring:
Outer spring outer diameter - 29.10mm
Outer spring inner diameter - 21.90mm
Inner spring outer diameter - 20.50mm
Inner spring inner diameter - 15.50mm

Set includes:
Intake springs - 12 pcs. SPR-A2095
Exhaust springs - 8 pcs. SPR-H1002D-AU
Titanium retainers: 12 pcs. intake RET-AU5VI-T2, 8 pcs. exhaust RET-AU5VE-T1
Seats - 8 pcs. exhaust SEAT-H1000

€639.00

Audi S2 S4 S6 2.2T 20V ABY AAN Gates Racing blue timing belt TS2RB

Length: 1208mm
Width: 19mm
Number of tooth: 151

Gates' timing belts offer a precision fit with easy installation and no interference engine damage - exactly what you've come to expect from the worldwide leader in timing belts.
- Tensile cord reinforced with premium, high-strength glass cords.
- Gripping teeth with aramid fiber technology and high saturation HNBR elastomeric composites for exceptional durability and heat resistance.
- Wear-resistant tooth jacket supported by reinforced nylon fabric and double-tooth stability.

The superior construction of Gates timing belts makes them 300 percent stronger than the standard aftermarket belt while providing up to three times the heat resistance.

€119.00

Audi A6 S4 RS4 3.0T Stroker JE Pistons kit CR 8.5 83mm

Product detailed specification
Bore size	83.00mm
Stroke	92.80mm
JE Pistons compression ratio (CR)	8.5:1
OEM compression ratio (CR)	9.3:1
Dome volume (CC)	-21.1cm³
Compression height (CH)	30.80mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous; Round, tuff coated piston skirt
Fits for	Audi S4, RS4, A6 - 2.7 -> 3.0 30V

€1,949.00

Audi / VW 2.0 TFSI EA113 JE Pistons kit FSR coated CR 9.25 82.5mm 353833

Product detailed specification
Bore size	82.50mm
Stroke	92.80mm
JE Pistons compression ratio (CR)	9.25:1
OEM compression ratio (CR)	10.5:1
Dome volume (CC)	-10.5cm³
Compression height (CH)	29.60mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous; FSR series; Oil squirter modification isn't needed
Fits for	Audi / VW - 2.0 TFSI EA113 (AXX, BGB, BPJ, BPY, BWA)

JE's patented Perfect Skirt coating makes piston slap, false knock, and cold-start wear a thing of the past.
For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!

€899.00

VW 2.0 16V 9A JE Pistons kit CR 8.5 83mm 301937

Product detailed specification
Bore size	83.00mm
Stroke	92.80mm
JE Pistons compression ratio (CR)	8.5:1
OEM compression ratio (CR)	10.5:1
Dome volume (CC)	-15cm³
Compression height (CH)	29.59mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous; coated FSR series skirt
Fits for	VW - 2.0 16V 9A

€899.00

VW 2.8 2.9 VR6 12V Wiseco piston kit CR 9.0 83mm K608M83

Product detailed specification
Bore size	83.00mm
Stroke	90.30mm
Wiseco compression ratio (CR)	9.0:1
OEM compression ratio (CR)	10.0:1
Dome volume (CC)	-26.2cm³
Compression height (CH)	32.38mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous; Full Round Skirt
Fits for	VW VR6 - 2.8 2.9 12V (AAA, ABV)

Wiseco ArmorGlide skirt coating is a dry film lubricant applied to the piston skirt. This coating helps reduce friction, improving performance, and will also help quiet the piston in the cylinder bore. This coating is permanently applied, and is not a break in coating, it is on the piston for the life of the part.

€1,199.00

Cometic VW / AUDI VR6 3.2 24V 2004-09 MLS cylinder head gasket 85x1.9mm...

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€189.00

Audi 200 S2 RS2 S4 S6 2.2T 20V FCP forged pistons kit 81.00mm CR 8.5

Audi 200 S2 RS2 S4 S6 2.2T 20V FCP forged pistons 81mm CR 8.5

Part number: FCPPA810085/5
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 81.00mm
Compression ratio (CR): 8.5:1
Compression height: 33.00 mm
Pin diameter: 20mm
Stroke: 86.40mm
Audi 200, S2, RS2, S4, S6 - 2.2 2.5 20V Turbo

€989.00

Audi S4 RS4 2.7 V6 Biturbo FCP forged piston kit 81mm CR 8.5

Part number: FCPPA810085RS4
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 81.00mm
Compression ratio (CR): 8.5:1
Compression height: 30.80 mm
Pin diameter: 21mm
Stroke: 86.40mm
Audi S4 RS4 - 2.7 30V Biturbo

€1,169.00

Audi / VW 2.0 TFSI EA113 JE Pistons kit FSR coated CR 9.25 83mm 353834

Product detailed specification
Bore size	83.00mm
Stroke	92.80mm
JE Pistons compression ratio (CR)	9.25:1
OEM compression ratio (CR)	10.5:1
Dome volume (CC)	-11.25cm³
Compression height (CH)	29.60mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous; FSR series; Oil squirter modification isn't needed
Fits for	Audi / VW - 2.0 TFSI EA113 (AXX, BGB, BPJ, BPY, BWA)

JE's patented Perfect Skirt coating makes piston slap, false knock, and cold-start wear a thing of the past.
For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!

€899.00

Audi / VW / Seat / Skoda 1.8T 20V FCP H-beam steel connecting rods 144mm/21mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHVW14450621-4
Profile: H-beam
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 21mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 600HP (4 cylinder)
Advertised RPM rating: 9000RPM
Audi / VW / Seat / Skoda:
1.8T 20V (AEB, BAM, AWB and others)

€439.00