Product detailed specification |
|
Bore size |
80.00mm |
Stroke |
81.50mm |
Wossner compression ratio (CR) |
11.5:1 |
OEM compression ratio (CR) |
10.5:1 |
Dome volume (CC) |
+3.50cm3 |
Compression height (CH) |
28.20mm |
Pin diameter |
18mm |
Fits for |
Opel 1.6 16V (X16XEL / C16XE) |
Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338260R
Gasket thickness: 1.90mm
Bore size: 87.50mm
Part number starting with 338 |
|
Athena advantages |
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
Product detailed specification |
|
Bore size |
86.50mm |
Stroke |
86.00mm |
Wossner compression ratio (CR) |
8.8:1 |
OEM compression ratio (CR) |
8.8:1 |
Dome volume (CC) |
-20.50cm3 |
Compression height (CH) |
30.40mm |
Pin diameter |
21mm |
Features |
Accepts Turbo and Nitrous |
Fits for |
Opel 2.0 16V Turbo (Z20LET, Z20LEH, Z20LER, Y20LET) |
Product detailed specification |
|
Bore size |
86.50mm |
Stroke |
86.00mm |
Wiseco compression ratio (CR) |
13.5:1 |
OEM compression ratio (CR) |
10.5:1 |
Dome volume (CC) |
12cm3 |
Compression height (CH) |
30.49mm |
Pin diameter |
21mm |
Features |
Accepts Turbo and Nitrous; asymmetrical FSR series |
Fits for |
Opel - 2.0 16V (C20XE) |
Set includes:
1 cylinder head gasket: OEM 56 07 867 (87.50x1.20mm)
2 camshaft seals: OEM 06 36 841
1 valve cover gasket set: OEM 607 648
16 valve seals: OEM 642 533
1 intake manifold gasket: OEM 850 655
1 exhaust manifold gasket: OEM 849 522
and etc.
Product detailed specification |
|
Bore size |
87.00mm |
Stroke |
86.00mm |
Wiseco compression ratio (CR) |
13.5:1 |
OEM compression ratio (CR) |
10.5:1 |
Dome volume (CC) |
12cm3 |
Compression height (CH) |
30.49mm |
Pin diameter |
21mm |
Features |
Accepts Turbo and Nitrous; asymmetrical FSR series |
Fits for |
Opel - 2.0 16V (C20XE) |
Part number starting with 330 |
|
Athena advantages |
|
Reinforced material |
Asbestos free composite raw material OE approved |
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
Product detailed specification |
|
Bore size |
86.50mm |
Stroke |
86.00mm |
Wiseco compression ratio (CR) |
12.5:1 |
OEM compression ratio (CR) |
10.5:1 |
Dome volume (CC) |
5.2cm3 |
Compression height (CH) |
30.19mm |
Pin diameter |
21mm |
Features |
Asymmetrical FSR series |
Fits for |
Opel - 2.0 16V (C20XE) |
Product detailed specification |
|
Bore size |
87.00mm |
Stroke |
86.00mm |
Wiseco compression ratio (CR) |
12.5:1 |
OEM compression ratio (CR) |
10.5:1 |
Dome volume (CC) |
5.2cm3 |
Compression height (CH) |
30.19mm |
Pin diameter |
21mm |
Features |
Asymmetrical FSR series |
Fits for |
Opel - 2.0 16V (C20XE) |
Product detailed specification |
|
Model number |
GEVI-3313S |
Head diameter |
30.00mm |
Stem diameter |
5.95mm |
Length |
92.30mm |
Material |
Inconel |
Fits for |
For Opel - 2.0 16V (Z20LET, Z20LEH) |