There are no items in cart
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
Crankshaft gear info:
• This reinforced crankshaft gear has been manufactured specifically for uprated turbo engines, where the original crankshaft gear not withstand the loads
• OEM part number: 034105263A
• Material: 42CrMo4
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
Camshaft gear info:
• This adjustable camshaft gear have an adjustment range of +7°
• This ensures adequate adjustment is guaranteed
• OEM quality
• 100% fit
• Large adjustment
Camshaft gear info:
• High quality billet aluminum adjustable cam gear from Tommi's Billet for Audi 2.2 Turbo engine.
• Includes cam position shutter wheel required for this engine.
• Works with original Hall sensor.
• Width 21mm.
• Black anodized.
Supertech 7mm single groove valve keeper fits for:
4 cylinder VW Corrado, Golf, Jetta engines - 1.8-2.0 16V (6A, KR, PL, 9A);
5 cylinder Audi 200, S2, RS2, S4, S6 engines - 2.2T 20V (3B, ABY, ADU, AAN);
Also for VW ABF and Audi 7A engines when using single groove valves
Product detailed specification
Manufacturer: FCP Engineering
Model: FCPRXA14450620-5
Profile: X-beam (Oiling channel from big end to piston pin)
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 20mm
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1000+HP (5 cylinder)
Advertised RPM rating: 9000RPM
Audi 200, Quattro, S2, RS2, S4, S6 - 2.2T 20V (3B, ABY, AAN, ADU)
Product detailed specification
Manufacturer: FCP Engineering
Model: FCPRHA15550620-5
Profile: H-beam
C to C: 155mm
Big end diameter: 50.6mm
Pin diameter: 20mm
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 800HP (5 cylinder)
Advertised RPM rating: 9000RPM
Audi Quattro, 200, S2, RS2, S4, S6 - 2.5 2.6 20V Stroker
Engine setup: 2.5tdi 236mm block with 95.5 crankshaft and standard 2.2 20V Pistons
Product detailed specification
Manufacturer: FCP Engineering
Model: FCPRHA14450620-5
Profile: H-beam
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 20mm
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 700HP (5 cylinder)
Advertised RPM rating: 9000RPM
Audi 90, Coupe - 2.3 20V (7A)
200, S2, RS2, S4, S6 - 2.2 20V Turbo (3B, ABY, ADU, AAN)
Length: 1208mm
Width: 19mm
Number of tooth: 151
Gates' timing belts offer a precision fit with easy installation and no interference engine damage - exactly what you've come to expect from the worldwide leader in timing belts.
- Tensile cord reinforced with premium, high-strength glass cords.
- Gripping teeth with aramid fiber technology and high saturation HNBR elastomeric composites for exceptional durability and heat resistance.
- Wear-resistant tooth jacket supported by reinforced nylon fabric and double-tooth stability.
The superior construction of Gates timing belts makes them 300 percent stronger than the standard aftermarket belt while providing up to three times the heat resistance.
Connecting rod length must 159mm
|
Product detailed specification |
|
|
Bore size |
82.00mm |
|
Stroke |
86.40mm |
|
Wossner compression ratio (CR) |
8.0:1 |
|
OEM compression ratio (CR) |
9.3:1 |
|
Dome volume (CC) |
-12.30cm3 |
|
Compression height (CH) |
33.40mm |
|
Pin diameter |
20mm |
|
Fits for |
Audi 2.2 20V (3B, ABY, AAN, ADU) |
|
Product detailed specification |
|
|
Bore size |
81.50mm |
|
Stroke |
86.40mm |
|
Wossner compression ratio (CR) |
8.00:1 |
|
OEM compression ratio (CR) |
9.30:1 |
|
Dome volume (CC) |
-12.30cm3 |
|
Compression height (CH) |
33.40mm |
|
Pin diameter |
20mm |
|
Fits for |
Audi 2.2 20V Turbo |
|
Product detailed specification |
|
|
Bore size |
81.50mm |
|
Stroke |
95.50mm |
|
JE Pistons compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
9.3:1 |
|
Dome volume (CC) |
-11.90cm3 |
|
Compression height (CH) |
29.24mm |
|
Pin diameter |
22mm |
|
Features |
Tuff coated piston skirt, HD Pins |
|
Fits for |
5 cylinder Audi - 2.5T 20V Stroker |
|
Product detailed specification |
|
|
Bore size |
82.00mm |
|
Stroke |
95.50mm |
|
JE Pistons compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
9.3:1 |
|
Dome volume (CC) |
-11.90cm3 |
|
Compression height (CH) |
29.24mm |
|
Pin diameter |
22mm |
|
Features |
Tuff coated piston skirt, HD Pins |
|
Fits for |
5 cylinder Audi - 2.5T 20V Stroker |
Set includes:
1 crankcase gasket
1 crankshaft seal rear
1 crankshaft seal front
1 oil pump gasket
1 coolant pump gasket
etc.
Set includes:
1 MLS cylinder head gasket (82mm x 1.65mm)
1 intake manifold gasket
1 exhaust manifold gasket
1 valve cover gasket
20 valve seals
and etc.
