Click here to open old website version
All categories
Parts by Car
Go
Parts by Car
Go
Parts by:
Category

4G63 4G64

Cometic Mitsubishi 2.0 4G63 4G63T DOHC EVO 4-8 MLS cylinder head gasket...
COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
€130.00
Mitsubishi 4G63T 4G64 ACL Race Calico main bearings 5M1219HC-STD
Sizes STD, .025, .25
Oil Clearance Standard
Half Type Upper & Lower
Material Tri-Metal
Min. Std Shaft Size 2.2435in / 56.985mm
Max. Std Shaft Size 2.2441in / 57.000mm
Min. Std Tunnel Size 2.4016in / 61.000mm
Max. Std Tunnel Size 2.4024in / 61.021mm
Max Wall at Crown 0.0783in / 1.990mm
Max Overall Length 0.8268in / 21.00mm
Notes For engines equipped with thrust washers

CT-1 is a Dry Film Lubricant coating that helps reduce friction and abrasive wear. It provides intermittent dry lubrication and is not affected by dust or dirt. CT-1 is specifically engineered to withstand the extreme conditions of today's high performance engines. Professional engine builders enjoy a higher level of confidence with increased embedability, strength and durability.

€199.00
Mitsubishi EVO 4-9 2.0 16V 4G63 Mahle piston kit 85.5mm CR 9 930130066

Product detailed specification

Bore size

85.50mm

Stroke

88.00mm

Mahle compression ratio (CR)

9.0:1

OEM compression ratio (CR)

8.3:1

Dome volume (CC)

-10cm3

Compression height (CH)

34.70mm

Pin diameter

22mm

Features

4032 alloy

Fits for

Mitsubishi EVO 8-9 - 2.0 16V (4G63)

€799.00
ACL oil pump Mitsubishi Evo 4-9 OPMB1176
  • Meets or Exceeds OEM pump flow
  • Individually inspected and tested to assure pressure and flow specifications
  • Twelve-month, 12,000 mile warranty
  • TSI6949 and ISO certification
  • Die cast ADC-12 aluminum housing for added strength and reduced weight
  • Steel copper alloy gerotor sets for dependable service and reliability
  • Tight tolerances for optimum pressure and flow performance
€449.00
Mitsubishi EVO 4-9 2.0 16V 4G63 Mahle piston kit 86mm CR 9.0 930130086

Product detailed specification

Bore size

86.00mm

Stroke

88.00mm

Mahle compression ratio (CR)

9.0:1

OEM compression ratio (CR)

8.3:1

Dome volume (CC)

-10cm3

Compression height (CH)

34.70mm

Pin diameter

22mm

Features

4032 alloy

Fits for

Mitsubishi EVO 8-9 - 2.0 16V (4G63)

€799.00
1
5 6 7