Subaru

Subaru WRX 2.0 16V EJ20 Wiseco Pistons CR 8.35 92mm K588M92AP

Product detailed specification
Bore size	92.00mm
Stroke	75.00mm
Wiseco compression ratio (CR)	8.35:1
OEM compression ratio (CR)	8.0:1
Dome volume (CC)	-9cm³
Compression height (CH)	32.66mm
Pin diameter	23mm
Features	Accepts Turbo and Nitrous; Full Round Skirt
Fits for	Subaru Impreza WRX STI - 2.0 16V (EJ20, EJ205, EJ207)

Armor Plated wiseco pistons have almost a bronze colored tint to the top of the piston and the wrist pin bore. Wiseco's Armor Plating is an abrasion resistant plating that raises the hardness of the aluminum, increases the durability of the ring grooves, prevents micro-welding of the piston rings, reduces carbon buildup and combats corrosion caused by detonation. Wiseco's most popular pistons now include Armor Plating.

€799.00

Subaru EJ20 EJ22 EJ25 King racing main bearings MB5382XPGC-STDX Coated

SX	SX

F5382/PRG	F5382/PRG

SX	SX

M5382/1PRG	M5382/1PRG

SX	SX

M5382/2PRG	M5382/2PRG

Quantity

1

2

Crankshaft

60.000 / 59.985

Housing

64.000 / 64.021

Max Wall

2.004

Max Length

22.962

18.999

15.113

Engines: Subaru - 2.0 2.2 2.5 (EJ20, EJ22, EJ25)

€90.00

Subaru WRX 2.5 EJ25 EJ257 Athena Cooper Ring cylinder head gasket set...

Athena Racing 330 series Cooper Ring cylinder head gasket set.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330078R (2 pcs.)
Gasket thickness: 1.20mm
Bore size: 101.30mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€279.00

Subaru Impreza WRX STI EJ205 EJ255 EJ257 Gates Racing timing belt T328RB

Product info:

Length: 2248mm

Width: 30mm

Number of tooth: 281

Gates' timing belts offer a precision fit with easy installation and no interference engine damage - exactly what you've come to expect from the worldwide leader in timing belts.

- Tensile cord reinforced with premium, high-strength glass cords.

- Gripping teeth with aramid fiber technology and high saturation HNBR elastomeric composites for exceptional durability and heat resistance.

- Wear-resistant tooth jacket supported by reinforced nylon fabric and double-tooth stability.

The superior construction of Gates timing belts makes them 300 percent stronger than the standard aftermarket belt while providing up to three times the heat resistance.

€209.00

Subaru 2.5 EJ257 OEM forged nitrided crankshaft 12200AA430

€499.00

Cometic Subaru EJ205 04-05" DOHC Turbo complete gasket kit PRO2023C

COMETIC StreetPro Kits cater to the budget-minded street-rodder who is looking to purchase a kit with all necessary gaskets and seals needed for their rebuild. StreetPro gasket kits are sold as a top-end kits and bottom-end kits. Purchase both top- and bottom-end kits for a total engine rebuild. Quality gasket materials are a priority in StreetPro kits. Kit materials include: MLX, AFM, Aramid Fiber, and Armor Clad.

Set includes:
2 - .041" MLX head gaskets 93mm bore
1 - thermostat seal
1 - water pump gasket
1 - valve cover set
4 - camshaft seals
1 - rear main seal
1 - front crank seal
2 - intake to tumbler gaskets
2 - intercooler Inlet gaskets
1 - blow off valve gasket
2 - intake manifold gaskets
1 - exhaust cross over gasket
2 - exhaust manifold gaskets
1 - throttle body gasket
16 - valve stem seals

€379.00

Cometic Subaru Sti EJ257 DOHC engine gasket kit PRO2048C

COMETIC StreetPro Kits cater to the budget-minded street-rodder who is looking to purchase a kit with all necessary gaskets and seals needed for their rebuild. StreetPro gasket kits are sold as a top-end kits and bottom-end kits. Purchase both top- and bottom-end kits for a total engine rebuild. Quality gasket materials are a priority in StreetPro kits. Kit materials include: MLX, AFM, Aramid Fiber, and Armor Clad.

Set includes:

2 MLX cylinder head gaskets
2 intake manifold gaskets
2 exhaust manifold gaskets
2 exhaust crossover gaskets
2 intake to tumbler gaskets
2 intercooler inlet gaskets
2 EGR control gaskets
2 air pump gaskets
1 blow off valve gasket
1 throttle body gasket
1 water pump gasket
1 oil cooler gasket
1 rear main seal
1 thermostat seal
4 camshaft seals
16 valve seals
1 valve cover set
1 timing cover set
and other

€480.00

Subaru EJ18 EJ20 EJ22 EJ25 ACL Race Series main bearings 5M8309HOS2-0.025

€149.00

Cometic Subaru WRX STI 2.0 16V EJ20GN EJ205 MLS cylinder head gasket kit...

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€159.00

Cometic Subaru WRX STI '04-12 2.5 16V EJ255 EJ257 MLS cylinder head gasket...

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€199.00

Cometic Subaru WRX STI 2.0 16V EJ20GN EJ205 MLS cylinder head gasket kit...

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€159.00

Cometic Subaru WRX STI '04-12 2.5 16V EJ255 EJ257 MLS cylinder head gasket...

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€199.00