Bearings (27)

Nissan SR20DE SR20DET ACL Race connecting rod bearings 4B2960H-STD

ENGINE BEARINGS
	CON ROD BEARING SET
	Part#
	4B2960H	4B2960HX
Sizes	STD, .025, .25	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical Halves
Material	Tri-metal Hardened steel backs
Min Std Shaft Size	1.888in / 47.956mm
Max Std Shaft Size	1.8887in / 47.974mm
Min Std Tunnel Size	2.0079in / 51.000mm
Max Std Tunnel Size	2.0084in / 51.013mm
Max Wall at Crown	0.0592in / 1.503mm	0.0587in / 1.490mm
Max Overall Length	0.673in / 17.10mm
Notes
Diagram (Top View)

Engines Nissan - 2.0 (SR20DE, SR20DET (not GTiR))

€68.00

ACL plain bearing measuring tape/flexigauge AR-1 (Red)

1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.

€16.00

Ford / Volvo 2.5L 5-cyl. ACL Race connecting rod bearing kit 5B7880H

€99.00

BMW M5 M6 S85B50 V10 ACL Race Series main bearings 6M1581H

€299.00

Toyota 2.5 3.0 2JZGTE ACL Race Calico connecting rod bearings 6B8100HXC-STD

€199.00

Audi RS6 C7, RS7 4.0 V8 TFSI King Racing connecting rod bearings...

€299.00

Ford 1.0L Ecoboost Turbo ACL Race Series main bearings 4M7330H

€199.00

Toyota 1UZ/2UZ/3UZ-FE ACL Race main bearings 5M8088H-STD

Sizes	STD, .025, .25, .50
Oil Clearance	Standard
Half Type	Upper & Lower
Material	Tri-Metal
Min. Std Shaft Size	2.6373in / 66.987mm
Max. Std Shaft Size	2.6378in / 67.000mm
Min. Std Tunnel Size	2.8346in / 71.999mm
Max. Std Tunnel Size	2.8352in / 72.014mm
Max Wall at Crown	0.0981in / 2.491mm
Max Overall Length	0.8858in / 22.5mm (8088H/HX) 0.7677in / 19.5mm (8089H/HX)
Weight	0.45
Notes	This part has no notch.

€139.00

Toyota 2.0 3S-GE 3S-GTE ACL Race main bearings 5M8361H-0.25

€119.00

Renault 1.6 1.7 1.8 1.9 2.0 King Racing main bearings MB5180XP-STDX

€73.00

Chevrolet V8 LS1 LS2 LS3 LS6 ACL Race Series main bearings 5M7298H-10

€299.00

Mini Cooper S 1.6 Prince N12 N14 N16 N18 ACL Race connecting rod bearings...

€119.00