Electronics

Depo Digital 52mm battery voltage gauge black dial & transparent lens

Depo Racing digital battery voltage gauge 52mm CSM-W5291B

€33.00

Depo Racing digital exhaust gas temperature (EGT) gauge 52mm WS-W5257B

€115.00

Patent-pending, Venturi-effect, tapped exhaust clamp for obtaining accurate lambda measurements in non-cat autos or other engines.

€115.00

Bosch injector 1700cc/3bar 0280158827

Specifications:
Coil Resistance: 9.1 Ohms / High Impedance
Dead Time: 0.45ms at 14 volts
Static Flow Rate @ 43.5 PSI ( 300kPa ) w/Gas: 1700 cc/min = 160 lb/hr
Static Flow Rate @ 50 PSI ( 350kPa ) w/Gas: 1875 cc/min = 180 lb/hr
Static Flow Rate @ 58 PSI ( 400kPa ) w/Gas: 2000 cc/min = 195 lb/hr
Connector: Bosch EV1
Injector Length: O-Ring to O-Ring: 62 mm
Injector Overall Length: 74 mm
Injector Body Diameter: 16mm
O-Ring: 14.5mm Viton
Acceptable Fuels: Gas/Petrol, alcohol/methanol, E85

€80.00

ECUMASTER Black connector with pins

€29.00

Subaru Impreza WRX STI EJ205 EJ255 EJ257 Gates Racing timing belt T328RB

Product info:

Length: 2248mm

Width: 30mm

Number of tooth: 281

Gates' timing belts offer a precision fit with easy installation and no interference engine damage - exactly what you've come to expect from the worldwide leader in timing belts.

- Tensile cord reinforced with premium, high-strength glass cords.

- Gripping teeth with aramid fiber technology and high saturation HNBR elastomeric composites for exceptional durability and heat resistance.

- Wear-resistant tooth jacket supported by reinforced nylon fabric and double-tooth stability.

The superior construction of Gates timing belts makes them 300 percent stronger than the standard aftermarket belt while providing up to three times the heat resistance.

€209.00

Ecumaster GPS to CAN V2 Module Autosport

€399.00

Turbosmart FPR6 Fuel Pressure Regulator -6AN (Black) TS-0404-1022

The Turbosmart FPR6 Series provides market-leading fuel control and response via true 1:1 ratio and superior flow and bypass capacity for vehicles with -6 / 6AN fuel systems. Utilising our Stainless Steel Valve Seat & Milspec Diaphragm the FPR6 Series is suitable for all Fuel types including Race Fuel and aggressive leaded fuels. Our FPR6 Range includes 6AN inlet and outlet and return fittings and is Available in Standard (35psi to 80psi) as well as LP (3psi to 20psi) for Low Pressure and Carburettor Systems to suit 1200HP systems.

Features
Stainless Steel Valve Seat
Suitable for all fuel types
1:1 Class Leading Ratio & Response
Adjustable Pressure
1/8 NPT Pressure Sensor Port
Unique Locking Collar Design
Milspec Diaphragm
Detailed Specific Fuel Flow Data & Spec

€289.00

Ecumaster Map sensor kit MAP-400

€65.00

Depo Racing digital fuel pressure gauge 6 bar 52mm WS-W5267B

€52.00

Bosch injector 2200cc/3bar 0280158821

Coil resistance [Ohm]: 12
Fitted with Viton upper and lower o-rings

€100.00

BMW M3 E46 3.2 S54 ARP connecting rods bolt kit M11 201-6103

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€279.00