Clutches

BMW coated N62B44 V8 JE Pistons kit CR 10.5 92mm

Product detailed specification
Bore size	92.00mm
Stroke	82.70mm
JE Pistons compression ratio (CR)	10.5:1
Dome volume (CC)	0.30cm³
Compression height (CH)	28.45mm
Pin diameter	21mm (HD pins)
Features	Accepts Turbo and Nitrous
Fits for	BMW - 4.4 (N62B44)

€2,699.00

Toyota 2.8 3.0 5M-GE 7M-GE/7M-GTE ACL Duraglide connecting rod bearings...

€75.00

Lancia Delta, Fiat Coupe 2.0 16V Turbo FCP X-beam steel connecting rods 145mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRXL1455422
Profile: X-beam
C to C: 145mm
Big end diameter: 53.91mm
Pin diameter: 22mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1000HP (4 cylinder)
Advertised RPM rating: 9000RPM
Lancia Delta - 2.0 8V, 2.0 16V Turbo (835, 836)
Fiat Coupe - 2.0 16V Turbo (175 A1.000)

€549.00

Audi S6 S4 RS4 2.7T 2.8 3.0 30V racing valve spring kit

Audi S6 S4 RS4 2.7T 2.8 3.0 30V FCP valve spring kit

Valve springs data
Installed seat pressure:
Intake valve spring - 25kg, exhaust double valve spring - 36kg
Load:
Intake - 56kg@10.5mm, exhaust - 84kg@10.5mm
Max lift:
intake - up to 11mm, exhaust - up to 12.7mm
Made from chrome-silicon steel SAE9254-V
18 pcs. intake valve single springs
12 pcs. exhaust valve double springs
Fits all V6 2.7 2.8 3.0 30V Turbo/NA Audi / VW engines.
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7600 RPM.
Can be used together with standard or with FCP titanium retainers.

€375.00

Audi / VW 1.6 1.8 2.0 ACL Race connecting rod bearings 4B1606H-STD

ENGINE BEARINGS
	CON ROD BEARING SET
	Part#
	4B1606H	4B1606HX
Sizes	STD, .025, .25, .50	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical Halves
Material	Tri-metal Hardened steel backs
Min Std Shaft Size	1.8802" /47.758mm
Max Std Shaft Size	1.8810" /47.778mm
Min Std Tunnel Size	1.9921" /50.600mm
Max Std Tunnel Size	1.9929" /50.619mm
Max Wall at Crown	0.0553" / 1.405mm	0.0548" /1.392mm
Max Overall Length	0.748" / 19.00mm
Notes	Bearing has 1.65mm oil hole at crown
Diagram (Top View)

Engines Audi / VW - 1.6 1.8 2.0 (2V, 4V, 5V, Turbo applications, 1983-2003)

€72.00

BMW M3 E30 2.3 S14 ARP head stud kit 201-4605

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€248.00

Mitsubishi 4G63T 4G64 ACL Race main bearings 5M1219HX-STD

ENGINE BEARINGS
	MAIN BEARING SET
	Part#
	5M1219H	5M1219HX
Sizes	STD,.025, .25	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Upper & Lower
Material	Tri-Metal
Min Std Shaft Size	2.2435in / 56.985mm
Max Std Shaft Size	2.2441in / 57.000mm
Min Std Tunnel Size	2.4016in / 61.000mm
Max Std Tunnel Size	2.4024in / 61.021mm
Max Wall at Crown	0.0783in / 1.990mm	0.0778in / 1.977mm
Max Overall Length	0.8268in / 21.00mm
Notes	For engines equipped with thrust washers
Diagram (Top View)

Engines Mitsubishi - 2.0 (4G63, 4G63-T, 4G64-S4)

€95.00

Mitsubishi EVO X 4B11T ACL Race Series main bearings 5M1237H-STD

ENGINE BEARINGS
	MAIN BEARING SET
	Part#
	5M1237H	5M1237HX
Sizes	STD, .025, .25	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Upper & Lower
Material	Tri-Metal
Min Std Shaft Size	2.0462 in / 51.973 mm
Max Std Shaft Size	2.0467 in / 51.985 mm
Min Std Tunnel Size	2.2047 in / 56.000 mm
Max Std Tunnel Size	2.2054 in / 56.018 mm
Max Wall at Crown	0.0786 in / 1.996 mm	0.0781 in / 1.983 mm
Max Overall Length	0.709 in / 18.00 mm
Notes	-
Diagram (Top View)

Engines Mitsubishi EVO X - 2.0 16V (4B11T)

€139.00

BMW BMEVN-1031S +1mm 1.8/2.5/2.8/3.0 exhaust valves

BMW 1.8 2.5 2.8 3.0 Supertech exhaust valve BMEVN-1031S +1mm

Product detailed specification
Model number	BMEVN-1031S
Head diameter	31.50mm
Stem diameter	5.96mm
Length	105.65mm
Material	Black nitrided stainless steel
Fits for	BMW - 1.8 2.5 2.8 3.0 (S42,M42,M50,S50,M52,S52,M54)

€29.00

Opel/Vauxhall 2.0 C20LET/XE JE Pistons CR 8.5:1 86.50mm 298737

Opel 2.0 C20LET C20XE JE Pistons kit CR 8.5 86.50mm 298737

Product detailed specification
Bore size	86.50mm
Stroke	86.00mm
JE Pistons compression ratio (CR)	8.5:1
OEM compression ratio (CR)	9.0:1
Dome volume (CC)	-16.90cm³
Compression height (CH)	30.50mm
Pin diameter	21mm
Features	Accepts Turbo and Nitrous; coated FSR series skirt
Fits for	Opel 2.0 16V (C20LET, C20XE)

JE's patented Perfect Skirt coating makes piston slap, false knock, and cold-start wear a thing of the past.
For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!

€899.00

Subaru CR4125XPG 2.0 2.2 2.5 connecting rod bearings

Subaru EJ20 EJ22 EJ25 King Racing connecting rod bearings CR4125XPG-0.50

SX	SX

C4125/PRG	C4125/PRG

Quantity

4

Crankshaft

51.999 / 51.984

Housing

55.001 / 55.019

Max Wall

1.501

Max Length

16.500

Engines: Subaru - 2.0 2.2 2.5 (EJ20, EJ22, EJ25)

€55.00

Toyota 1JZGE/GTE 2JZGE/GTE King Racing main bearings MB7084XPC-STDX Coated

Component	M7084/1UPR / M7084/1LPR
Min Crankshaft Diameter	2.440 inch / 61.98mm
Max Crankshaft Diameter	2.441inch / 62.00mm
Min Housing Diameter	2.599 inch / 66.02 mm
Max Housing Diameter	2.600 inch / 66.04 mm
Bearing Length	0.787 inch / 19.99 mm
Max Wall Thickness	0.000 inch / 0.00 mm

Component	M7084/2UPR / M7084/2LPR
Min Crankshaft Diameter	2.440 inch / 61.98mm
Max Crankshaft Diameter	2.441inch / 62.00mm
Min Housing Diameter	2.599 inch / 66.02 mm
Max Housing Diameter	2.600 inch / 66.04 mm
Bearing Length	0.906 inch / 23.01 mm
Max Wall Thickness	0.000 inch / 0.00 mm

Engines: Toyota 1JZGE, 1JZGTE, 2JZGE, 2JZGTE

€169.00