Clutches

SACHS Performance ceramic clutch disc 228mm 881861000019

Clutch disc, torsion damped, with special ceramic clutch friction material.
Diameter: 228mm
Number of teeth: 23
Hub profile: 21,8x24,2-23N
Transmittable torque: 490Nm

These high performance clutch plates from Sachs are a direct replacement for an OEM clutch plate and have a much more aggressive friction surface which allows them to handle up to 40% more torque. This makes them ideal for competition cars where a more aggressive clutch actuation is acceptable. For these clutch plates to operate at their maximum torque capacity they should be used with a Sachs high performance clutch cover.

€349.00

Ford Cosworth YB / N5 ACL Race Series connecting rod bearings 4B2166H-STD

ENGINE BEARINGS
	CON ROD BEARING SET
	Part#
	4B2166H	4B2166HX
Sizes	STD, .25, .50	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical Halves
Material	Tri-metal Hardened steel backs
Min Std Shaft Size	2.0468 in / 51.990 mm
Max Std Shaft Size	2.0472 in / 52.000 mm
Min Std Tunnel Size	2.1654 in / 55.000 mm
Max Std Tunnel Size	2.1661 in / 55.020 mm
Max Wall at Crown	0.0589 in / 1.496 mm	0.0584 in / 1.483 mm
Max Overall Length	0.792 in / 20.12 mm
Notes
Diagram (Top View)

€65.00

Mini Cooper R56 Prince engine Supertech valve spring set SPRK-MC56BE

Springs data:

Seat pressure - 70lbs @ 33.6mm
Open (lift) pressure - 163lbs @ 10mm
Spring coil bind - 22.20mm
Rate - 9.70lbs/mm
Max lift - 11.40mm
Outer diameter: 23.50mm/16.50mm
Inner diameter: 19.30mm/12.30mm

Set includes:
Beehive springs: 16 pcs. SPR-MC56BE
Titanium retainers: 16 pcs. RET-MC56/T1

€630.00

Cometic Nissan RB25 2.5 1989-02 MLS cylinder head gasket 87x1.3mm C4318-051

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€245.00

Cometic Nissan VR38DETT 3.8 V6 MLX cylinder head gasket kit 100x0.81mm...

COMETIC MLX (Multi-Layer Stopper) gaskets utilize an integrated stopper layer for combustion chamber sealing and improved clamp load around the cylinder without increasing bore distortion. MLX technology can be found in some head gaskets and are made from the same materials as our MLS Head Gaskets. No sealants or re-torque required.

€265.00

Honda 2.0 2.4 K20 K24 (+1mm), 2.0 2.2 F20C F22C (STD) Supertech Inconel...

Product detailed specification
Model number	HEVI-1030D
Head diameter	31.00mm
Stem diameter	5.45mm
Length	108.80mm
Material	Inconel
Fits for	Honda: Civic, CR-V, Integra - 2.0 2.4 (K20, K24) S2000 - 2.0 2.2 (F20C, F22C)

€41.00

BMW 1.6 1.8 M40 M42 M43, S42 USA FCP valve guide kit 7mm

€99.00

Kelford A90 Supra MK5 / BMW B58 Valve Springs & Retainers KVS58-BT

€849.00

BMW 2.0 16V B48B20 FCP racing conical spring and retainer kit

Valve springs data
Installed seat pressure - 34kg (75lbs)
Load - 63kg@10mm (140lbs@10mm)
Max lift - up to 12mm
Made from chrome-silicon steel SAE9254-V
BMW - 2.0 16V Turbo B48B20
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7500 RPM.
Kit includes:
16 pcs. conical valve springs
8 pcs. titanium retainers 5mm
8 pcs. titanium retainers 6mm

€539.00

BMW M3 E30 S14B20 ACL Race connecting rod bearings 4B1489H-STD

€109.00

BMW M5 E34 S38B36 ACL Race Series connecting rod bearings 6B1568HX-STD

€199.00

BMW M5 4.4 V8 S63 Supertech exhaust valve BMEVI-1063S-HS

Product detailed specification
Model number	BMEVI-1063S-HS
Head diameter	29mm
Stem diameter	5.94mm
Length	106mm
Material	Inconel-Nimonic / Sodium Filled
Fits for	BMW 4.4 V8 Biturbo - (S63B44)

€69.00