2JZ-GE / 2JZ-GTE

Kolbenschmidt indėklų tarpelio matavimo juostelių rinkinys 120000417001

Prekės kodas 50009880.
Kolbenschmidt plastikinių matavimo juostelių rinkinys (10 vnt.).
Šios matavimo juostelės yra skirtos nustatyti indėklų tarpelį.

18,00 EUR

ACL indėklų tarpelio matavimo juostelių rinkinys AG-1 (Žalios sp.)

1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.

16,00 EUR

Permatex Ultra Slick surinkimo tepalas variklio indėklams 118ml (1 vnt.)

18,00 EUR

Toyota 2.5 3.0 2JZGTE ACL Race švaistikliniai indėklai 6B8100H-STD

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Identical halves
Material	Tri-metal Hardened steel backs
Min. Std Shaft Size	2.0465in / 51.981mm
Max. Std Shaft Size	2.0472in / 52mm
Min. Std Tunnel Size	2.1663in / 55.024mm
Max. Std Tunnel Size	2.167in / 55.042mm
Max Wall at Crown	0.0593in / 1.506mm
Max Overall Length	0.7598in / 19.3mm
Weight	0.253
Notes	0

109,00 EUR

Toyota 2.5 3.0 2JZGTE ACL Race švaistikliniai indėklai 6B8100HX-STD

ENGINE BEARINGS
	CON ROD BEARING SET
	Part#
	6B8100H	6B8100HX
Sizes	STD, .025, .25	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical halves
Material	Tri-metal Hardened steel backs
Min Std Shaft Size	2.0465in / 51.981mm
Max Std Shaft Size	2.0472in / 52mm
Min Std Tunnel Size	2.1663in / 55.024mm
Max Std Tunnel Size	2.167in / 55.042mm
Max Wall at Crown	0.0593in / 1.506mm	0.0588in / 1.493mm
Max Overall Length	0.7598in / 19.3mm
Notes
Diagram (Top View)

Engines Toyota - 2.5 3.0 (1JZGE, 1JZGTE, 2JZGE, 2JZGTE)

109,00 EUR

Toyota 2.5 3.0 2JZGTE ACL Race švaistikliniai indėklai 6B8100H-0.25

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Identical halves
Material	Tri-metal Hardened steel backs
Min. Std Shaft Size	2.0465in / 51.981mm
Max. Std Shaft Size	2.0472in / 52mm
Min. Std Tunnel Size	2.1663in / 55.024mm
Max. Std Tunnel Size	2.167in / 55.042mm
Max Wall at Crown	0.0593in / 1.506mm
Max Overall Length	0.7598in / 19.3mm
Weight	0.253
Notes	0

109,00 EUR

Toyota 2.5 3.0 2JZGTE ACL Race Calico švaistikliniai indėklai 6B8100HC-STD

ENGINE BEARINGS
	CON ROD BEARING SET
	Part#
	6B8100H	6B8100HX
Sizes	STD, .025, .25	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical halves
Material	Tri-metal Hardened steel backs
Min Std Shaft Size	2.0465in / 51.981mm
Max Std Shaft Size	2.0472in / 52mm
Min Std Tunnel Size	2.1663in / 55.024mm
Max Std Tunnel Size	2.167in / 55.042mm
Max Wall at Crown	0.0593in / 1.506mm	0.0588in / 1.493mm
Max Overall Length	0.7598in / 19.3mm
Notes
Diagram (Top View)

Engines Toyota - 2.5 3.0 (1JZGE, 1JZGTE, 2JZGE, 2JZGTE)

CT-1 is a Dry Film Lubricant coating that helps reduce friction and abrasive wear. It provides intermittent dry lubrication and is not affected by dust or dirt. CT-1 is specifically engineered to withstand the extreme conditions of today's high performance engines. Professional engine builders enjoy a higher level of confidence with increased embedability, strength and durability.

199,00 EUR

Toyota 2.5 3.0 2JZGTE ACL Race Calico švaistikliniai indėklai 6B8100HXC-STD

199,00 EUR

Toyota 2.5 3.0 2JZGE 2JZGTE ACL šoniniai indėklai 2T8103-STD

Prekės kodas 2T8103-STD
ACL šoniniai indėklai
Toyota - 2.5 3.0 (1JZGE, 1JZGTE, 2JZGE, 2JZGTE)

28,00 EUR

Toyota 2.5 3.0 2JZGTE ACL Race pagrindiniai indėklai 7M8103H-STD

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Upper & Lower
Material	Tri-Metal
Min. Std Shaft Size	2.4403in / 61.984mm
Max. Std Shaft Size	2.441in / 62.001mm
Min. Std Tunnel Size	2.5992in / 66.02mm
Max. Std Tunnel Size	2.5998in / 66.035mm
Max Wall at Crown	0.0789in / 2.004mm
Max Overall Length	0.7874in / 20mm (8103H/HX) 0.9055in / 23mm (8104H/HX)
Weight	0.44
Notes	0

199,00 EUR

Toyota 2.5 3.0 2JZGTE ACL Race pagrindiniai indėklai 7M8103HX-STD

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Upper & Lower
Material	Tri-Metal
Min. Std Shaft Size	2.4403in / 61.984mm
Max. Std Shaft Size	2.441in / 62.001mm
Min. Std Tunnel Size	2.5992in / 66.02mm
Max. Std Tunnel Size	2.5998in / 66.035mm
Max Wall at Crown	0.0789in / 2.004mm
Max Overall Length	0.7874in / 20mm (8103H/HX) 0.9055in / 23mm (8104H/HX)
Weight	0.44
Notes	0

199,00 EUR

Toyota 2.5 3.0 2JZGTE ACL Race pagrindiniai indėklai 7M8103H-0.25

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Upper & Lower
Material	Tri-Metal
Min. Std Shaft Size	2.4403in / 61.984mm
Max. Std Shaft Size	2.441in / 62.001mm
Min. Std Tunnel Size	2.5992in / 66.02mm
Max. Std Tunnel Size	2.5998in / 66.035mm
Max Wall at Crown	0.0789in / 2.004mm
Max Overall Length	0.7874in / 20mm (8103H/HX) 0.9055in / 23mm (8104H/HX)
Weight	0.44
Notes	0

199,00 EUR