Product detailed specification |
|
Bore size |
85.00mm |
Stroke |
88.00mm |
JE Pistons compression ratio (CR) |
8.5:1 |
OEM compression ratio (CR) |
8.3:1 |
Dome volume (CC) |
-12.50cm3 |
Compression height (CH) |
34.70mm |
Pin diameter |
22mm |
Features |
Accepts Turbo and Nitrous; asymmetrical FSR series |
Fits for |
Mitsubishi EVO 8-9 - 2.0 16V (4G63) |
Part number starting with 330 |
|
Athena advantages |
|
Reinforced material |
Asbestos free composite raw material OE approved |
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
Product detailed specification |
|
Bore size |
86.50mm |
Stroke |
86.00mm |
Wiseco compression ratio (CR) |
12.5:1 |
OEM compression ratio (CR) |
10.5:1 |
Dome volume (CC) |
5.2cm3 |
Compression height (CH) |
30.19mm |
Pin diameter |
21mm |
Features |
Asymmetrical FSR series |
Fits for |
Opel - 2.0 16V (C20XE) |
Product detailed specification |
|
Bore size |
86.25mm |
Stroke |
86.00mm |
Wiseco compression ratio (CR) |
8.3:1 |
OEM compression ratio (CR) |
8.5:1 |
Dome volume (CC) |
-14.8cm3 |
Compression height (CH) |
34.00mm |
Pin diameter |
22mm |
Features |
Accepts Turbo and Nitrous; Full Round Skirt |
Fits for |
Toyota Supra - 3.0 (2JZGTE) |
Athena Racing 338-series multilayer steel (MLS) cylinder head gasket set.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338002R (2 pcs.)
Gasket thickness: 1.00mm
Bore size: 94.00mm
Part number starting with 338 |
|
Athena advantages |
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
Position | Connecting rod: 1, 2, 3, 4, 5, 6 |
||||||
---|---|---|---|---|---|---|---|
Pairs & Part Numbers |
|
||||||
Quantity | 6 | ||||||
Crankshaft Diameter | 48.992 / 48.974mm | ||||||
Housing Diameter | 53.000 / 53.015mm | ||||||
Max Wall Thickness | 1.994mm | ||||||
Max Length | 16.002mm |
Product detailed specification |
|
Bore size |
82.00mm |
Stroke |
90.30mm |
Wiseco compression ratio (CR) |
9.0:1 |
OEM compression ratio (CR) |
10.0:1 |
Dome volume (CC) |
-26.2cm3 |
Compression height (CH) |
32.38mm |
Pin diameter |
20mm |
Features |
Accepts Turbo and Nitrous; Full Round Skirt |
Fits for |
VW VR6 - 2.8 2.9 12V (AAA, ABV) |
Product detailed specification
Manufacturer: FCP Engineering
Model: FCPRHA14450620-5
Profile: H-beam
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 20mm
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 700HP (5 cylinder)
Advertised RPM rating: 9000RPM
Audi 90, Coupe - 2.3 20V (7A)
200, S2, RS2, S4, S6 - 2.2 20V Turbo (3B, ABY, ADU, AAN)
Part number 61-33500-00
Victor Reinz MLS cylinder head gasket set
Audi RS4 - 2.7T V6