


Athena Racing 330 series Cooper Ring cylinder head gasket set.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330078R (2 pcs.)
Gasket thickness: 1.20mm
Bore size: 101.30mm
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |


|
Product detailed specification |
|
|
Bore size |
82.50mm |
|
Stroke |
92.80mm |
|
JE Pistons compression ratio (CR) |
9.6:1 |
|
OEM compression ratio (CR) |
9.6:1 |
|
Dome volume (CC) |
-7.1cm3 |
|
Compression height (CH) |
29.60mm |
|
Pin diameter |
21mm |
|
Features |
Accepts Turbo and Nitrous; coated FSR series |
|
Fits for |
Audi / VW 2.0 16V TSI chain driven engines EA888 (CAWA, CAWB, CCTA, CCZB, CAEA) |

|
Product detailed specification |
|
|
Bore size |
87.00mm |
|
Stroke |
86.00mm |
|
Wiseco compression ratio (CR) |
9.5:1 |
|
OEM compression ratio (CR) |
8.5:1 |
|
Dome volume (CC) |
-5.3cm3 |
|
Compression height (CH) |
34.00mm |
|
Pin diameter |
5,72mm wall tool steel pins, 22mm |
|
Features |
HD2 Forging; FSR series piston skirt Pistons are with 1mm deeper valve pockets |
|
Fits for |
Toyota Supra - 3.0 (2JZGTE) |

Direct replacement Single-mass flywheel made from Alloy steel (16MnCr5) with 60-2 counter.
Used with 01E gearbox and Sachs Performance clutch kit.
Weight - 8.4kg.
Can be used with Sachs Performance clutch cover 883082999707
Clutch disc options:
Organic Sachs Performance (500+ Nm) - 881861999802
4pad ceramic Sachs Performance (up to 700 Nm) - 881861999809
6pad ceramic Sachs Performance (750+ Nm) - 881861000027

Product detailed specification
Manufacturer: FCP Engineering
Model: FCPRHB1334822-6
Profile: H-beam
C to C: 133mm
Big end diameter: 48mm
Pin diameter: 22mm
Quantity: 6 pcs., 12 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 800HP (6 cylinder)
Advertised RPM rating: 9000RPM
BMW - 2.0 2.5 2.8 3.0 3.2 (M50, M52, M54, S50 USA, S52 USA)
Used for turbo conversion with OEM pistons


|
|
|
|||||||||||||||||||
| Quantity | 1 | 2 | 2 | ||||||||||||||||||
| Crankshaft | 60.000 / 59.985 | 60.000 / 59.985 | 60.000 / 59.985 | ||||||||||||||||||
| Housing | 64.000 / 64.021 | 64.000 / 64.021 | 64.000 / 64.021 | ||||||||||||||||||
| Max Wall | 2.004 | 2.004 | 2.004 | ||||||||||||||||||
| Max Length | 22.962 | 18.999 | 15.113 |

Part number: FCPPA815085/5
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 81.50mm
Compression ratio (CR): 8.5:1
Compression height: 33.00 mm
Pin diameter: 20mm
Stroke: 86.40mm
Audi 200, S2, RS2, S4, S6 - 2.2 2.5 20V Turbo

Valve springs data
Installed seat pressure:
Intake valve spring - 25kg, exhaust double valve spring - 36kg
Load:
Intake - [email protected], exhaust - [email protected]
Max lift:
intake - up to 11mm, exhaust - up to 12.7mm
Made from chrome-silicon steel SAE9254-V
12 pcs. intake valve single springs
8 pcs. exhaust valve double springs
12 pcs. intake valve spring titanium retainers
8 pcs. exhaust valve spring titanium retainers
Fits all 4 cylinder 1.8-2.0 20V Turbo/NA Audi / Seat / Skoda / VW engines.
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7600 RPM.
Titanium retainers are very strong and light, they help to eliminate valve float. Weight is only 9 and 4 g.