Parts by engine (117)

Direct replacement Single-mass flywheel made from Alloy steel (16MnCr5)
Used with 5 / 6 gang gearboxes and 240mm clutch kit.
Weight - 6kg.

Can be used with Sachs Performance clutch cover 883082001243

€389.00

Audi / VW 1.8T 20V forged JE Pistons kit CR 8.5 82mm 242928

Product detailed specification
Bore size	82.00mm
Stroke	86.40mm
JE Pistons compression ratio (CR)	8.5:1
OEM compression ratio (CR)	9.5:1
Dome volume (CC)	-9.30cm³
Compression height (CH)	32.66mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous; Round skirt
Fits for	VAG 1.8T 20V

€899.00

Mitsubishi 2.0 4G63 Evo 4-9 Flywheel Bolt Kit

Mitsubishi EVO 4-9 2.0 16V 4G63 ARP flywheel bolt kit 107-2803

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€59.00

Audi / VW R32 R36 24V Ferrea exhaust valve STD (long) F2288P

The Super Alloy Engine valves represent the highest level of sophistication in valve technology. These valves are designed to handle the extreme heat requirements and punishment of today’s Nitro Fuels, Supercharged, Turbocharged, Nitrous Oxide, and Marine race motors.

€57.00

Cometic Toyota Supra 3.0 2JZ-GE/GTE 93-06' MLS cylinder head gasket 87x1mm...

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements

€245.00

Opel / Vauxhall 2.0 C20XE C20LET FCP racing valve spring kit with retainers...

Valve springs data
Installed seat pressure - 30kg
Load - 100kg@13mm
Max. lift - up to 13mm
Made from chrome-silicone steel SAE9254-V
16 pcs. outer springs
16 pcs. inner springs
16 pcs. titanium retainers
16 pcs. seats
Fits Opel / Vauxhall 4 cylinder 2.0 16V C20XE C20LET engines.
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7600 RPM.
Titanium retainers are very light and strong, helps eliminate valve float. Weight is only 10g.

€499.00

BMW M3 S54B32 Xtreme Performance 230mm Ceramic Twin Plate Clutch KBM23550-2E

Xtreme Clutch 230mm twin plate kit

The Xtreme Clutch 230mm Race Clutch is available with either ceramic, organic or carbon friction materials, making these kits ideal for high horsepower and motorsport applications where a high heat capacity is required.

The Xtreme 230mm Race Clutch is the ultimate in clutch solutions with a range like no other. The 230mm range boasts a variety of kits to suit most high horsepower applications for street, circuit, drift or race use. The Xtreme 230mm Race Clutch has been designed, allowing for endless options with clutch operation with internal hydraulic options and pull-push conversions a factoring feature in the 230mm range.

Product Features:

Torque capacity 1800Nm
Kit contains everything you need for a successful installation + accessories
Push type billet alloy cover Low pedal effort
4140 Chromoly pressure & intermediate plates
Chromoly adapter ring
Low inertia
Serviceable components
SFI certified design

	Flat Diaphragm	Rolled Diaphragm
Clamping Force	1300kg	1300kg
Torque Rating	1800Nm	1800Nm
Bearing Contact Diameter	65mm	FLAT BEARING
Bearing Load (@ 48mm)	180kg	150kg
Release Travel Required	7mm	7mm
Assembly Mass (without flywheel)	8.30kg	8.30kg
Disc Set Static Mass	2.25kg	2.25kg
Friction Thickness New	8mm (0.315")	8mm (0.315")
Friction Thickness Worn	7.5mm (0.295")	7.5mm (0.295")

€1,999.00

VW / Audi 1.8 20V, 2.0 16V, 2.2T 20V, 1.9 2.5 TDI ARP M10 main bolt

8740 Chrome Moly: Until the development of today’s modern alloys, chrome moly was popularly considered a high strength material. Now viewed as only moderate strength, 8740 chrome moly is seen as a good tough steel, with adequate fatigue properties for most racing applications, but only if the threads are rolled after heat-treatment, as is the standard ARP production practice. Typically, chrome moly is classified as a quench and temper steel, that can be heat-treated to deliver tensile strengths between 180,000 and 210,000 psi

€11.00

Cometic Subaru WRX STI 2.0 16V EJ20GN EJ205 MLS cylinder head gasket kit...

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€159.00

Audi S4 RS4 3.0 V6 Biturbo Stroker FCP forged piston kit 82mm CR 8.5

Part number: FCPPA820085RS4STR
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 82.00mm
Compression ratio (CR): 8.5:1
Compression height: 27.50 mm
Pin diameter: 21mm
Stroke: 92.80mm
Audi S4 RS4 - 3.0 30V Stroker Biturbo

€1,169.00

VW / Audi 2.0 16V TSI TFSI FCP valve spring and titanium retainer kit

Spring data:
Seat pressure - 82lbs @ 37.00mm
Open (lift) pressure - 180lbs @ 10mm
Spring coil bind - 24.90mm
Max lift - 11.90mm
Rate - 10.20lbs/mm
Spring outer diameter - 24.00mm
Spring inner diameter - 16.50mm

Set includes:
Single springs - 16 pcs.
Titanium retainers - 16pcs.

€449.00

BMW 2.5 12V M20B25 Wiseco pistons CR 8.8 84.5mm KE317M845AP

Product detailed specification
Bore size	84.50mm
Stroke	75.00mm
Wiseco compression ratio (CR)	8.8:1
OEM compression ratio (CR)	8.8:1
Dome volume (CC)	-6.8cm³
Compression height (CH)	34.70mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous, Round piston skirt
Fits for	BMW - 2.5 12V (M20B25)

Armor Plated wiseco pistons have almost a bronze colored tint to the top of the piston and the wrist pin bore. Wiseco's Armor Plating is an abrasion resistant plating that raises the hardness of the aluminum, increases the durability of the ring grooves, prevents micro-welding of the piston rings, reduces carbon buildup and combats corrosion caused by detonation. Wiseco's most popular pistons now include Armor Plating.

€1,229.00