
Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number 330058R
Gasket thickness: 1.30mm
Bore size: 86.50mm
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |

|
Product detailed specification |
|
|
Bore size |
82.00mm |
|
Stroke |
86.40mm |
|
JE Pistons compression ratio (CR) |
9.25:1 |
|
OEM compression ratio (CR) |
9.5:1 |
|
Dome volume (CC) |
-3.6cm3 |
|
Compression height (CH) |
32.66mm |
|
Pin diameter |
20mm |
|
Features |
Accepts Turbo and Nitrous, round piston skirt |
|
Fits for |
VAG - 1.8T 20V |

| Position | 1,2,3,4,5,6 | ||||||
|---|---|---|---|---|---|---|---|
| Pairs & PN |
|
||||||
| Quantity | 6 | ||||||
| Crankshaft | 57.978 / 57.958 | ||||||
| Housing | 63.000 / 63.017 | ||||||
| Max Wall | 2.499 | ||||||
| Max Length | 18.471 |


|
Product detailed specification |
|
|
Bore size |
86.25mm |
|
Stroke |
86.00mm |
|
Wiseco compression ratio (CR) |
8.8:1 |
|
OEM compression ratio (CR) |
9.0:1 |
|
Dome volume (CC) |
-13cm3 |
|
Compression height (CH) |
30.49mm |
|
Pin diameter |
21mm |
|
Features |
Round piston skirt |
|
Fits for |
Opel - 2.0 16V (C20LET) |

The Super Alloy Engine valves represent the highest level of sophistication in valve technology. These valves are designed to handle the extreme heat requirements and punishment of today’s Nitro Fuels, Supercharged, Turbocharged, Nitrous Oxide, and Marine race motors.

|
Product detailed specification |
|
|
Bore size |
93.00mm |
|
Stroke |
75.00mm |
|
Mahle compression ratio (CR) |
8.0:1 |
|
OEM compression ratio (CR) |
8.0:1 |
|
Dome volume (CC) |
-12cm3 |
|
Compression height (CH) |
32.70mm |
|
Pin diameter |
23mm |
|
Features |
PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications |
|
Fits for |
Subaru Impreza WRX STI - 2.0 16V (EJ20, EJ205, EJ207) |

Spring data:
Seat pressure [email protected]
Max lift. 14.90mm
Rate 12.50lbs/mm
Spring coil bind 24.70mm
Set includes:
Dual springs: 16 pcs. SPR-M1007D
Titanium retainers: 16 pcs. RET-M65-T1
Seats: 16 pcs. SEAT-M1007D
Valve seals: 16pcs. VS-H6.6E

Clutch disc, torsion damped, with special ceramic clutch friction material.
Diameter: 240mm
Number of teeth: 23
Hub profile: 21.8x24.2-23N
Transmittable torque: 720Nm
Manufacturer compare numbers:
Audi
03L 141 031 P
06A 141 031 Q
VW
03L 141 031 P
06A 141 031 Q
06A 141 031 QX
074 141 032 D
These high performance clutch plates from Sachs are a direct replacement for an OEM clutch plate and have a much more aggressive friction surface which allows them to handle up to 40% more torque. This makes them ideal for competition cars where a more aggressive clutch actuation is acceptable. For these clutch plates to operate at their maximum torque capacity they should be used with a Sachs high performance clutch cover.

Piston rings data:
Part number 034 75 N0 (STD).
Diameter - 81.01mm
1. M 1.5 Mo P
2. NM 1.75
3. DSF 3.0 Cr