There are no items in cart
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
Armor Plated wiseco pistons have almost a bronze colored tint to the top of the piston and the wrist pin bore. Wiseco's Armor Plating is an abrasion resistant plating that raises the hardness of the aluminum, increases the durability of the ring grooves, prevents micro-welding of the piston rings, reduces carbon buildup and combats corrosion caused by detonation. Wiseco's most popular pistons now include Armor Plating.
|
Product detailed specification |
|
|
Bore size |
82.00mm |
|
Stroke |
92.80mm |
|
Wiseco compression ratio (CR) |
9.0:1 |
|
OEM compression ratio (CR) |
9.3:1 |
|
Dome volume (CC) |
-4.8cm3 |
|
Compression height (CH) |
29.59mm |
|
Pin diameter |
20mm |
|
Features |
Accepts Turbo and Nitrous; FSR series skirt |
|
Fits for |
AUDI - 2.2T 20V Stroker (Stroke 92.8mm) |
Product detailed specification
Manufacturer: FCP Engineering
|
Product detailed specification |
|
|
Bore size |
81.00mm |
|
Stroke |
86.40mm |
|
Wossner compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
9.3:1 |
|
Dome volume (CC) |
-9.60cm3 |
|
Compression height (CH) |
30.70mm |
|
Pin diameter |
21mm |
|
Fits for |
Audi 2.7T 30V (AGB, ASJ, AZB) |
| ENGINE BEARINGS | ||
 |
MAIN BEARING SET |
|
| Part# | ||
| 5M1644H |
5M1644HX |
|
| Sizes | STD, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Upper & Lower | |
| Material | Tri-metal | |
| Min Std Shaft Size | 2.1243in / 53.958mm | |
| Max Std Shaft Size | 2.1251in / 53.978mm | |
| Min Std Tunnel Size | 2.3228in / 59.000mm | |
| Max Std Tunnel Size | 2.3236in / 59.019mm | |
| Max Wall at Crown | 0.0985in / 2.502mm | 0.0980in / 2.489mm |
| Max Overall Length | 0.728in / 18.49mm | |
| Notes | Set contain 6 x 1648H and 4 x 1644H shells. Use 1648H shell in #4 position as upper and lower. | |
|
Diagram |
|
|
Part number 1T1219-STD
ACL thrust washers kit
Mitsubishi - 2.0 16V (4G63, 4G63T, 4G64-S4)
Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330023R
Gasket thickness: 1.50mm
Bore size: 87.60mm
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
|
Part number starting with 338 |
|
|
Athena advantages |
|
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
|
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
|
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
