
ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.


|
Product detailed specification |
|
|
Bore size |
86.25mm |
|
Stroke |
86.00mm |
|
Wiseco compression ratio (CR) |
9.1-9.25:1 |
|
OEM compression ratio (CR) |
8.5:1 |
|
Dome volume (CC) |
-12cm3 |
|
Compression height (CH) |
32.00mm |
|
Pin diameter |
22mm |
|
Features |
Accepts Turbo and Nitrous |
|
Fits for |
Nissan 180SX, 200SX (S13, S14) 2.0 16V (SR20DET) |

|
Product detailed specification |
|
|
Bore size |
86.50mm |
|
Stroke |
86.00mm |
|
JE Pistons compression ratio (CR) |
9.5:1 |
|
OEM compression ratio (CR) |
8.5:1 |
|
Dome volume (CC) |
-8.30cm3 |
|
Compression height (CH) |
34.00mm |
|
Pin diameter |
22mm |
|
Features |
Accepts Turbo and Nitrous; asymmetrical FSR series pistons skirt |
|
Fits for |
Toyota Supra - 3.0 (2JZGTE) |

|
Product detailed specification |
|
|
Bore size |
83.00mm |
|
Stroke |
92.80mm |
|
JE Pistons compression ratio (CR) |
9.1:1 |
|
OEM compression ratio (CR) |
10.5:1 |
|
Dome volume (CC) |
-12.20cm3 |
|
Compression height (CH) |
29.60mm |
|
Pin diameter |
20mm |
|
Features |
Accepts Turbo and Nitrous; full round skirt |
|
Fits for |
Audi / VW - 2.0 TFSI EA113 (AXX, BGB, BPJ, BPY, BWA) |


Valve springs data
Installed seat pressure:
Intake valve spring - 25kg, exhaust double valve spring - 36kg
Load:
Intake - [email protected], exhaust - [email protected]
Max lift:
intake - up to 11mm, exhaust - up to 12.7mm
Made from chrome-silicon steel SAE9254-V
18 pcs. intake valve single springs
12 pcs. exhaust valve double springs
18 pcs. intake titanium retainers
12 pcs. exhaust titanium retainers
Fits all V6 2.7 2.8 3.0 30V Turbo/NA Audi / VW engines.
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7600 RPM. Titanium retainers are very strong and light, they help to eliminate valve float. Weight is only 9 and 4 g.


| ENGINE BEARINGS | ||
![]() |
CON ROD BEARING SET |
|
| Part# | ||
| 6B1515H |
6B1515HX |
|
| Sizes | STD, .025, .25 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.9675in / 49.975mm |
|
| Max Std Shaft Size |
1.9681in / 49.991mm |
|
| Min Std Tunnel Size |
2.0866in / 53.000mm |
|
| Max Std Tunnel Size |
2.0875in / 53.015mm |
|
| Max Wall at Crown |
0.0588in / 1.493mm |
0.0538in / 1.481mm |
| Max Overall Length |
0.709in / 18.00mm |
|
| Notes | ||
|
Diagram |
![]() |
|

| Sizes | STD, .025, .25, .50 |
| Oil Clearance | Standard |
| Half Type | Identical Halves |
| Material | Tri-Metal |
| Min. Std Shaft Size | 2.3616in / 59.984mm |
| Max. Std Shaft Size | 2.3622in / 60.000mm |
| Min. Std Tunnel Size | 2.5197in / 64.000mm |
| Max. Std Tunnel Size | 2.5205in / 64.020mm |
| Max Wall at Crown | 0.0789in / 2.005mm |
| Max Overall Length | 0.7480in / 19.00mm (8297H/HX) 0.5953in / 15.12mm (8298H/HX) 0.8642in / 21.95mm (8299H/HX - Flange) |
| Weight | 0.31 |
| Notes | Thrust in #3 pos. |