Direct replacement Single-mass flywheel made from Alloy steel (16MnCr5).
Used with 6 gang gearboxes and original or aftermarket clutch kit.
Weight - 7.5kg

Can be used with Sachs Performance clutch cover 883082999760

Clutch disc options:
Organic Sachs Performance (500+ Nm) - 881861999802
4pad ceramic Sachs Performance (up to 700 Nm) - 881861999809
6pad ceramic Sachs Performance (750+ Nm) - 881861000027

- Outperforms all current market in-tank fuel pumps
- Designed for engines with up to 985hp
- Award Winning OE Technology
- High Pressure, High flow performance
- OEM technology designed and developed for E85.
- All pumping components have been validated to OEM specification for approved use in E85/Flex fuel application
- Fittings In (mm): 11
- Fittings Out (mm): 9
- Pump: Ti Automotive (Walbro) F90000295
- Voltage DC: 12
- Pulse Width Modulation Compatible: Yes
- One Way Valve: No
- Flow Ltr/Hr (Max): 535
- Flow Ltr/Hr @ 3 Bar (44psi): 456
- Flow Ltr/Hr @ 5 Bar (73psi): 336
- Max Pressure (Bar): 7.9
- Length (mm): 130
- Diameter (mm): 50 / 39
- Weight (Kg): 0.430

Walbro part number: GSS342 (includes full install kit)
Type: universal electric in-tank fuel pump
Fuel: gasoline
Flow rate: 255LPH
Noise level: very quiet
Minimum voltage: 12V
Fuel pump dimensions:
Length: 120mm (overall)
Length: 80mm (case only)
Diameter: 39.5mm
Inlet width: 11mm
Outlet width: 8mm
Operating pressure: 15-90 PSI - final fuel pressure set by regulator
Pushing a whopping 255 liters of fuel per hour at high pressure
High pressure, high performance universal in-tank fuel pump for the extreme automotive enthusiast
All Walbro fuel pumps are brand new and 100% authentic Walbro. Made in the USA
Design based on TI Automotive OEM Chevrolet Corvette and Dodge Viper technology

• Low Amp Draw
• Capable of handling 500hp+ under standard operating conditions
• Design based on Ti Automotive OEM Chevrolet Corvette and Dodge Viper technology

Fittings In (mm):- 11
Fittings Out (mm):- 8
Pump:- GSS352G3
Voltage DC:- 12
Flow Ltr/Hr (Max):-420
Flow Ltr/Hr @ 3 Bar (44psi):- 315
Flow Ltr/Hr @ 5 Bar (73psi):- 235
Max Pressure:- 7.6
Length (mm):- 120
Diameter (mm):- 39.2
Weight (Kg):- 0.366

Walbro Part Number: F90000267 (includes full install kit)
Type: Universal in-tank fuel pump
Fuel: Gasoline / E85
Flow Rate: 450LPH
Outer diameter (small): 39mm
Outer diameter (large): 50mm
Outer diameter: 11mm / 9mm
Length: 130mm

• Award-winning OE technology.
• Outperforms all current market in-tank fuel pumps.
• Designed for engines up to around 800bhp on 12 volts, 1000bhp on 13,5 volts.
• High pressure, high flow performance OEM technology designed and developed for E85 and gasoline.
• Dual channel turbine design for maximum efficiency under high pressure and high temperature applications.

Enjoy the Walbro's new DCSS 39/50 in-tank fuel pump. Able to support an aggressive 700+ horsepower, with a super charger, this innovative dual pumping channel design delivers maximum pressure with superior fuel flow. Operating in both petrol and E85, this fuel pump comes with a check valve to avoid system leak-down and extended cranking at start-up. This superior design results in improved hot fuel flow, as well as minimal noise, increasing efficiency by 20% over conventional pumps, delivering unparalleled performance.

Specifications:

• Fittings In (mm): 11
• Fittings Out (mm): 9
• Pump: Ti Automotive (Walbro) F90000285
• Voltage DC: 12
• Pulse Width Modulation Compatible: Yes
• One way valve (NRV): Yes
• Flow Ltr/Hr (Max): 528
• Flow Ltr/Hr @ 3 Bar (44psi): 435
• Flow Ltr/Hr @ 5 Bar (73psi): 345
• Max Pressure (Bar): 8.3
• Length (mm): 130
• Diameter (mm): 50 / 39
• Weight (Kg): 0.430